Assessment of Standard Syntaxis of Basin and Sub-basin Flood and Urban Drainage in Taihu Basin

2021 ◽  
Author(s):  
Xiting Li ◽  
Shouwei Shang ◽  
Leizhi Wang ◽  
Yintang Wang ◽  
Lingjie Li
Keyword(s):  
Urban Drainage ◽  
Taihu Basin

Comprehensive Planning of Urban Drainage and Wastewater Treatment

1993 ◽  
Vol 27 (12) ◽  
pp. 205-208
Author(s):  
Dirk-Th Kollatsch
Keyword(s):  
Wastewater Treatment ◽  
Transport Model ◽  
Drainage System ◽  
Simulation Models ◽  
Urban Drainage ◽  
Sewer Systems ◽  
Priority Task ◽  
Treatment Facilities ◽  
Receiving Waters ◽  
Pollution Impacts

For upgrading the urban drainage system (UDS) the reduction of pollution impacts is the priority task concerning the environmental protection of the receiving waters. With simulation models the interactions between surface, sewer systems, overflow structures and treatment facilities within the UDS can be shown. Models to simulate the pollutant impacts, transport and the effects on the receiving waters are available. In a first step a pollutant transport model of sewer systems and a model to simulate the wastewater treatment processes are connected. With these models the efficiency of upgrading measures can be checked in all parts of urban drainage systems.

Total Discharges Taken into Account for Comprehensive Planning of Urban Drainage and Waste Water Treatment

1992 ◽  
Vol 26 (9-11) ◽  
pp. 2609-2612
Author(s):  
D.-Th. Kollatsch
Keyword(s):  
Waste Water ◽  
Water Treatment ◽  
Waste Water Treatment ◽  
Simulation Models ◽  
Urban Drainage ◽  
Comprehensive Planning ◽  
Environmental Care ◽  
Sewer Systems ◽  
Treatment Facilities ◽  
Receiving Waters

The most important task of urban drainage and waste water treatment in the future is the environmental care of rivers and receiving waters. For this it is necessary to have a look at all discharges of sewer systems and treatment facilities. With simulation models the interactions between surface, sewer systems, overflow structures and treatment facilities can be shown. With these models the efficiency of upgrading measures can be proved in all parts of urban water systems.

Comparison of the efficiency of best stormwater management practices in urban drainage systems

1999 ◽  
Vol 39 (9) ◽  
pp. 269-276 ◽  
Author(s):  
R. Mehler ◽  
M. W. Ostrowski
Keyword(s):  
Stormwater Management ◽  
Management Practices ◽  
Alternative Methods ◽  
Urban Drainage ◽  
Pollution Load ◽  
Load Model ◽  
Urban Stormwater Management ◽  
Sewer Systems ◽  
Combined Sewer ◽  
Stormwater Management Practices

Increasingly extended and alternative methods for urban stormwater management have been discussed in Germany and elsewhere. Without question an economically and ecologically sound combination of central and decentral measures will be a concept of the future. Yet, at present the introduction of approaches other than traditional combined sewer systems is restricted due to missing planning tools and technologies. Adding a number of frequently used Best Stormwater Management Practices (BSMP's) has widely extended the applicability of an existing stormwater water balance and pollution load model.

Modifications of rainfall runoff and decision finding models for on-line simulation in real time control

1999 ◽  
Vol 39 (9) ◽  
pp. 201-207
Author(s):  
Andreas Cassar ◽  
Hans-Reinhard Verworn
Keyword(s):  
Real Time ◽  
Urban Drainage ◽  
Rain Event ◽  
Rainfall Runoff ◽  
Real Time Control ◽  
Design Storm ◽  
Time Control ◽  
Timing Data ◽  
On Line ◽  
Rainfall Runoff Model

Most of the existing rainfall runoff models for urban drainage systems have been designed for off-line calculations. With a design storm or a historical rain event and the model system the rainfall runoff processes are simulated, the faster the better. Since very recently, hydrodynamic models have been considered to be much too slow for real time applications. However, with the computing power of today - and even more so of tomorrow - very complex and detailed models may be run on-line and in real time. While the algorithms basically remain the same as for off-line simulations, problems concerning timing, data management and inter process communication have to be identified and solved. This paper describes the upgrading of the existing hydrodynamic rainfall runoff model HYSTEM/EXTRAN and the decision finding model INTL for real time performance, their implementation on a network of UNIX stations and the experiences from running them within an urban drainage real time control project. The main focus is not on what the models do but how they are put into action and made to run smoothly embedded in all the processes necessary in operational real time control.

Fiction and reality in the modelling world-balance between simplicity and complexity, calibration and identifiability, verification and falsification

1999 ◽  
Vol 39 (9) ◽  
pp. 1-8 ◽  
Author(s):  
P. Harremoës ◽  
H. Madsen
Keyword(s):  
Model Prediction ◽  
Model Performance ◽  
Data Series ◽  
Urban Drainage ◽  
Model Structure ◽  
And Control

Where is the balance between simplicity and complexity in model prediction of urban drainage structures? The calibration/verification approach to testing of model performance gives an exaggerated sense of certainty. Frequently, the model structure and the parameters are not identifiable by calibration/verification on the basis of the data series available, which generates elements of sheer guessing - unless the universality of the model is be based on induction, i.e. experience from the sum of all previous investigations. There is a need to deal more explicitly with uncertainty and to incorporate that in the design, operation and control of urban drainage structures.

A novel approach to the real-time modelling of large urban drainage systems

1997 ◽  
Vol 36 (8-9) ◽  
pp. 19-24 ◽  
Author(s):  
Richard Norreys ◽  
Ian Cluckie
Keyword(s):  
Real Time ◽  
Dynamic Models ◽  
Drainage System ◽  
Radar Data ◽  
Urban Drainage ◽  
Real Time Control ◽  
Empirical Modelling ◽  
Time Control ◽  
Novel Approach ◽  
Non Linear Systems

Conventional UDS models are mechanistic which though appropriate for design purposes are less well suited to real-time control because they are slow running, difficult to calibrate, difficult to re-calibrate in real time and have trouble handling noisy data. At Salford University a novel hybrid of dynamic and empirical modelling has been developed, to combine the speed of the empirical model with the ability to simulate complex and non-linear systems of the mechanistic/dynamic models. This paper details the ‘knowledge acquisition module’ software and how it has been applied to construct a model of a large urban drainage system. The paper goes on to detail how the model has been linked with real-time radar data inputs from the MARS c-band radar.

Technical solutions envisaged in managing solids in combined sewer networks

1996 ◽  
Vol 33 (9) ◽  
pp. 237-244 ◽  
Author(s):  
Ghassan Chebbo ◽  
Dominique Laplace ◽  
André Bachoc ◽  
Yves Sanchez ◽  
Benoit Le Guennec
Keyword(s):  
Large Scale ◽  
Suspended Solids ◽  
Drainage Area ◽  
Bed Load ◽  
Urban Drainage ◽  
Combined Sewer ◽  
Wet Weather ◽  
Technical Solutions ◽  
Dry Weather Flow ◽  
Sewer Networks

Solids in combined sewer networks represent two important technical questions: - the clogging of man-entry sewers, and - pollution in urban wet weather discharges, whose main vectors are generally suspended solids. In this paper, we shall present first, curative technical solutions which avoid or remove deposits in man-entry sewers. We shall discuss the partial extraction of the largest solids; selective trapping of bed load solids, which form deposits; and the displacement of deposits using dry weather flow flushing waves. We shall then examine technical solutions to control pollution in urban wet weather discharges. This will show that decantation is an efficient means of fighting pollution. However, it is not always feasible because it involves large scale investments. Complementary methods should, therefore, be developed and used at different points in the water's passage through an urban drainage area.

Settling Velocity Analysis for Stormwater Solids in Urban Drainage BMPs

2009 ◽  
Vol 2009 (9) ◽  
pp. 6402-6413
Author(s):  
G. Ying ◽  
C. Berretta ◽  
I. Gnecco ◽  
G. Becciu ◽  
J. Sansalone
Keyword(s):  
Settling Velocity ◽  
Urban Drainage ◽  
Velocity Analysis

scholarly journals Estimation of the G2P Design Storm from a Rainfall Convectivity Index

Water ◽  
2021 ◽  
Vol 13 (14) ◽  
pp. 1943
Author(s):  
Rosario Balbastre-Soldevila ◽  
Rafael García-Bartual ◽  
Ignacio Andrés-Doménech
Keyword(s):  
Shape Parameter ◽  
Rainfall Intensity ◽  
Analytical Relationship ◽  
Urban Drainage ◽  
Practical Application ◽  
Resolution Time ◽  
Simple Method ◽  
Design Storm ◽  
Intensity Duration Frequency ◽  
Two Parameter

The two-parameter gamma function (G2P) design storm is a recent methodology used to obtain synthetic hyetographs especially developed for urban hydrology applications. Further analytical developments on the G2P design storm are presented herein, linking the rainfall convectivity n-index with the shape parameter of the design storm. This step can provide a useful basis for future easy-to-handle rainfall inputs in the context of regional urban drainage studies. A practical application is presented herein for the case of Valencia (Spain), based on high-resolution time series of rainfall intensity. The resulting design storm captures certain internal statistics and features observed in the fine-scale rainfall intensity historical records. On the other hand, a direct, simple method is formulated to derivate the design storm from the intensity–duration–frequency (IDF) curves, making use of the analytical relationship with the n-index.

Sign in / Sign up

Export Citation Format

Share Document