Optimization of amphetamines multivariate detection by GC-FTIR spectra preprocessing

Author(s):  
Stefanut Ciochina ◽  
Mirela Praisler
2020 ◽  
pp. 1-8
Author(s):  
Amira Rachah ◽  
Olav Reksen ◽  
Nils Kristian Afseth ◽  
Valeria Tafintseva ◽  
Sabine Ferneborg ◽  
...  

Abstract The objective of the study was to evaluate the potential of Fourier transform infrared spectroscopy (FTIR) analysis of milk samples to predict body energy status and related traits (energy balance (EB), dry matter intake (DMI) and efficient energy intake (EEI)) in lactating dairy cows. The data included 2371 milk samples from 63 Norwegian Red dairy cows collected during the first 105 days in milk (DIM). To predict the body energy status traits, calibration models were developed using Partial Least Squares Regression (PLSR). Calibration models were established using split-sample (leave-one cow-out) cross-validation approach and validated using an external test set. The PLSR method was implemented using just the FTIR spectra or using the FTIR together with milk yield (MY) or concentrate intake (CONCTR) as predictors of traits. Analyses were conducted for the entire first 105 DIM and separately for the two lactation periods: 5 ≤ DIM ≤ 55 and 55 < DIM ≤ 105. To test the models, an external validation using an independent test set was performed. Predictions depending on the parity (1st, 2nd and 3rd-to 6th parities) in early lactation were also investigated. Accuracy of prediction (r) for both cross-validation and external test set was defined as the correlation between the predicted and observed values for body energy status traits. Analyzing FTIR in combination with MY by PLSR, resulted in relatively high r-values to estimate EB (r = 0.63), DMI (r = 0.83), EEI (r = 0.84) using an external validation. Only moderate correlations between FTIR spectra and traits like EB, EEI and dry matter intake (DMI) have so far been published. Our hypothesis was that improvements in the FTIR predictions of EB, EEI and DMI can be obtained by (1) stratification into different stages of lactations and different parities, or (2) by adding additional information on milking and feeding traits. Stratification of the lactation stages improved predictions compared with the analyses including all data 5 ≤ DIM ≤105. The accuracy was improved if additional data (MY or CONCTR) were included in the prediction model. Furthermore, stratification into parity groups, improved the predictions of body energy status. Our results show that FTIR spectral data combined with MY or CONCTR can be used to obtain improved estimation of body energy status compared to only using the FTIR spectra in Norwegian Red dairy cattle. The best prediction results were achieved using FTIR spectra together with MY for early lactation. The results obtained in the study suggest that the modeling approach used in this paper can be considered as a viable method for predicting an individual cow's energy status.


Coatings ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 183
Author(s):  
Ghiath Jnido ◽  
Gisela Ohms ◽  
Wolfgang Viöl

In the present work, the solution precursor plasma spray (SPPS) process was used to deposit zinc oxide (ZnO) coatings on wood surfaces using zinc nitrate solution as precursor to improve the hydrophobicity and the color stability of European beech wood under exposure to ultraviolet (UV) light. The surface morphology and topography of the wood samples and the coatings were characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The formation of ZnO was detected with the help of X-ray photoelectron spectroscopy (XPS) and by Fourier transform infrared (FTIR) spectroscopy. The FTIR spectra of the coated samples showed the typical Zn–O band at 445 cm−1. According to the XPS analysis, the coatings consist of two different Zn-containing species: ZnO and Zn(OH)2. Variation of the deposition parameters showed that the most significant parameters affecting the microstructure of the coating were the solution concentration, the deposition scan speed, and carrier gas flow rate. The wettability behaviors of the coated wood were evaluated by measuring the water contact angle (WCA). The coatings that completely covered the wood substrates showed hydrophobic behaviors. UV-protection of wood surfaces after an artificial UV light irradiation was evaluated by color measurements and FTIR spectroscopy. The ZnO-coated wood surfaces were more resistant to color change during UV radiation exposure. The total color change decreased up to 60%. Additionally, the FTIR spectra showed that the wood surfaces coated with ZnO had more stability. The carbonyl groups formation and C=C-bonds consumption were significantly lower.


2021 ◽  
Vol 339 ◽  
pp. 129872
Author(s):  
Aori Qileng ◽  
Hongshuai Zhu ◽  
Siqian Liu ◽  
Liang He ◽  
Weiwei Qin ◽  
...  

Author(s):  
P. Yella reddy ◽  
T. Srinivasa Krishna ◽  
M. Gowrisankar ◽  
K. Siva kumar ◽  
Chebolu Naga Sesha Sai Pavan Kumar

Author(s):  
Abigail A. Enders ◽  
Nicole M. North ◽  
Chase M. Fensore ◽  
Juan Velez-Alvarez ◽  
Heather C. Allen

Author(s):  
Maria Ioana MORAR ◽  
Florinela FETEA ◽  
Ancuta Mihaela ROTAR ◽  
Melinda NAGY ◽  
Cristina Anamaria SEMENIUC

Four essential oils isolated from dried leaves of parsley, lovage, basil, and thyme were investigated by FTIR spectroscopy. FTIR spectra revealed characteristic key bands for the main compounds of tested essential oils.


2002 ◽  
Vol 100 (22) ◽  
pp. 3529-3534 ◽  
Author(s):  
A. PIETROPOLLI CHARMET ◽  
P. STOPPA ◽  
R. VISINONI ◽  
S. GIORGIANNI ◽  
G. NIVELLINI
Keyword(s):  

2010 ◽  
Vol 405 (8) ◽  
pp. 2137-2143 ◽  
Author(s):  
E. Mansour ◽  
G. El-Damrawi

1989 ◽  
Vol 193 ◽  
pp. 93-100 ◽  
Author(s):  
Gianguido Ramis ◽  
Guido Busca
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document