Climate Data Records for Atmospheric Motion Vectors for C3S

Author(s):  
Roger Huckle ◽  
Marie Doutriaux-Boucher ◽  
Alessio Lattanzio ◽  
Olivier Hautecoeur ◽  
Oliver Sus ◽  
...  
2021 ◽  
Author(s):  
Marie Doutriaux-Boucher ◽  
Roger Huckle ◽  
Alessio Lattanzio ◽  
Olivier Sus ◽  
Jaap Onderwaater ◽  
...  

<p>This presentation provides an overview of the different upper-air wind data records available at EUMETSAT for usage in global and regional reanalysis. The assimilation of Atmospheric Motion Vectors (AMV) is recognised to be important to reduce the forecast errors in NWP model runs. In support of the Copernicus Climate Change Service (C3S), EUMETSAT produced several AMV Climate Data Records (CDR) from geostationary and low-earth orbit satellites for assimilation into ECMWF’s next global reanalysis ERA6.</p><p>Since the launch of its first generation of geostationary satellites, EUMETSAT has developed its own unique algorithms to derive atmospheric motion vectors (AMVs). These algorithms are used to provide real time AMVs using images acquired from instruments on-board both polar and geostationary satellites. These AMVs are routinely assimilated into weather forecast models. EUMETSAT archived all image data from its instruments (MVIRI and SEVIRI) in geostationary orbit and the global record of Advanced Very High Resolution Radiometer (AVHRR) data back to the late 1970s providing a suitable data source for climate research allowing the production of consistent AMV CDRs over the entire period.</p><p>Two long AMV data records are available now from the geostationary sensors on Meteosat-2 to Meteosat-10 covering 1981-2017 over Africa and Europe and from AVHRR Global Area Coverage (GAC) data from 16 AVHRR instruments starting with the TIROS-N satellite and covering polar AMVs over the Northern and Southern hemisphere from 1978-2019. In addition, full resolution AVHRR images (Local Area Coverage (LAC)) from the AVHRR aboard the polar orbiting Metop-A and -B satellites were used to generate a CDR containing polar AMVs from single satellite retrievals and global AMVs from the combined Metop-A/B dual satellite retrieval starting in 2007 and 2013, respectively.</p><p>For all data records, the EUMETSAT AMV algorithm adapted for climate purposes was used and extensive validation of the data records were performed. It shows that the CDR are homogeneous and very stable over the period. They are suitable for usage in model reanalysis and climate analysis. The CDR are in agreement with ground based radiosonde and model data. For the polar AMVs, a remarkable agreement with MODIS AMVs has been found.</p><p>To better serve closer to real time needs for reanalysis, EUMETSAT is experimenting with the continuous production of an Interim Climate Data Record (ICDR) with a timeliness close to real-time. With a still not completely operational low-cost approach, a timeliness of 83% within 18 hours at similar quality was achieved.</p><p>In addition to the existing data records the presentation provides the plan for future improvements and new CDR releases for AMV data records in the coming years. In particular, the use of better information on multi-layer cloud objects in AMV retrievals is a central part for the improvements of the AMVs from geostationary orbit.  </p>


2021 ◽  
Vol 13 (9) ◽  
pp. 1702
Author(s):  
Kévin Barbieux ◽  
Olivier Hautecoeur ◽  
Maurizio De Bartolomei ◽  
Manuel Carranza ◽  
Régis Borde

Atmospheric Motion Vectors (AMVs) are an important input to many Numerical Weather Prediction (NWP) models. EUMETSAT derives AMVs from several of its orbiting satellites, including the geostationary satellites (Meteosat), and its Low-Earth Orbit (LEO) satellites. The algorithm extracting the AMVs uses pairs or triplets of images, and tracks the motion of clouds or water vapour features from one image to another. Currently, EUMETSAT LEO satellite AMVs are retrieved from georeferenced images from the Advanced Very-High-Resolution Radiometer (AVHRR) on board the Metop satellites. EUMETSAT is currently preparing the operational release of an AMV product from the Sea and Land Surface Temperature Radiometer (SLSTR) on board the Sentinel-3 satellites. The main innovation in the processing, compared with AVHRR AMVs, lies in the co-registration of pairs of images: the images are first projected on an equal-area grid, before applying the AMV extraction algorithm. This approach has multiple advantages. First, individual pixels represent areas of equal sizes, which is crucial to ensure that the tracking is consistent throughout the processed image, and from one image to another. Second, this allows features that would otherwise leave the frame of the reference image to be tracked, thereby allowing more AMVs to be derived. Third, the same framework could be used for every LEO satellite, allowing an overall consistency of EUMETSAT AMV products. In this work, we present the results of this method for SLSTR by comparing the AMVs to the forecast model. We validate our results against AMVs currently derived from AVHRR and the Spinning Enhanced Visible and InfraRed Imager (SEVIRI). The release of the operational SLSTR AMV product is expected in 2022.


2018 ◽  
Vol 35 (9) ◽  
pp. 1737-1752 ◽  
Author(s):  
Dae-Hui Kim ◽  
Hyun Mee Kim

AbstractIn this study, the effect of assimilating Himawari-8 (HIMA-8) atmospheric motion vectors (AMVs) on forecast errors in East Asia is evaluated using observation system experiments based on the Weather Research and Forecasting Model and three-dimensional variational data assimilation system. The experimental period is from 1 August to 30 September 2015, during which both HIMA-8 and Multifunctional Transport Satellite-2 (MTSAT-2) AMVs exist. The energy-norm forecast error based on the analysis of each experiment as reference was reduced more by replacing MTSAT-2 AMVs with HIMA-8 AMVs than by adding HIMA-8 AMVs to the MTSAT-2 AMVs. When the HIMA-8 AMVs replaced or were added to MTSAT-2 AMVs, the observation impact was reduced, which implies the analysis–forecast system was improved by assimilating HIMA-8 AMVs. The root-mean-square error (RMSE) of the 500-hPa geopotential height forecasts based on the analysis of each experiment decreases more effectively when the region lacking in upper-air wind observations is reduced by assimilating both MTSAT-2 and HIMA-8 AMVs. When the upper-air radiosonde (SOUND) observations are used as reference, assimilating more HIMA-8 AMVs decreases the forecast error. Based on various measures, the assimilation of HIMA-8 AMVs has a positive effect on the reduction of forecast errors. The effects on the energy-norm forecast error and the RMSE based on SOUND observations are greater when HIMA-8 AMVs replaced MTSAT-2 AMVs. However, the effects on the RMSE of the 500-hPa geopotential height forecasts are greater when both HIMA-8 and MTSAT-2 AMVs were assimilated, which implies potential benefits of assimilating AMVs from several satellites for forecasts over East Asia depending on the choice of measurement.


2006 ◽  
Vol 21 (4) ◽  
pp. 663-669 ◽  
Author(s):  
Dongliang Wang ◽  
Xudong Liang ◽  
Yihong Duan ◽  
Johnny C. L. Chan

Abstract The fifth-generation Pennsylvania State University–National Center for Atmospheric Research nonhydrostatic Mesoscale Model is employed to evaluate the impact of the Geostationary Meteorological Satellite-5 water vapor and infrared atmospheric motion vectors (AMVs), incorporated with the four-dimensional variational (4DVAR) data assimilation technique, on tropical cyclone (TC) track predictions. Twenty-two cases from eight different TCs over the western North Pacific in 2002 have been examined. The 4DVAR assimilation of these satellite-derived wind observations leads to appreciable improvements in the track forecasts, with average reductions in track error of ∼5% at 12 h, 12% at 24 h, 10% at 36 h, and 7% at 48 h. Preliminary results suggest that the improvement depends on the quantity of the AMV data available for assimilation.


2014 ◽  
Vol 120 (3-4) ◽  
pp. 587-599 ◽  
Author(s):  
Inderpreet Kaur ◽  
Prashant Kumar ◽  
S. K. Deb ◽  
C. M. Kishtawal ◽  
P. K. Pal ◽  
...  

2019 ◽  
Vol 11 (17) ◽  
pp. 1981 ◽  
Author(s):  
David Stettner ◽  
Christopher Velden ◽  
Robert Rabin ◽  
Steve Wanzong ◽  
Jaime Daniels ◽  
...  

Atmospheric motion vectors (AMVs) derived from geostationary meteorological satellites have long stood as an important observational contributor to analyses of global-scale tropospheric wind patterns. This paradigm is evolving as numerical weather prediction (NWP) models and associated data assimilation systems are at the point of trying to better resolve finer scales. Understanding the physical processes that govern convectively-driven weather systems is usually hindered by a lack of observations on the scales necessary to adequately describe these events. Fortunately, satellite sensors and associated scanning strategies have improved and are now able to resolve convective-scale flow fields. Coupled with the increased availability of computing capacity and more sophisticated algorithms to track cloud motions, we are now poised to investigate the development and application of AMVs to convective-scale weather events. Our study explores this frontier using new-generation GOES-R Series imagery with a focus on hurricane applications. A proposed procedure for processing enhanced AMV datasets derived from multispectral geostationary satellite imagery for hurricane-scale analyses is described. We focus on the use of the recently available GOES-16 mesoscale domain sector rapid-scan (1-min) imagery, and emerging methods to optimally extract wind estimates (atmospheric motion vectors (AMVs)) from close-in-time sequences. It is shown that AMV datasets can be generated on spatiotemporal scales not only useful for global applications, but for mesoscale applications such as hurricanes as well.


2014 ◽  
Vol 31 (1) ◽  
pp. 33-46 ◽  
Author(s):  
Régis Borde ◽  
Marie Doutriaux-Boucher ◽  
Greg Dew ◽  
Manuel Carranza

Abstract Height assignment (HA) is currently the most challenging task in the operational atmospheric motion vectors’ (AMV) extraction scheme. Several sources of error are associated with the height assignment step, including the sensitivity of the HA methods to several atmospheric parameters. However, one of the main difficulties is to identify, for the HA calculation, the most significant image pixels used in the feature-tracking process. The most widely used method selects the coldest pixels in a representative target box (e.g., coldest 25%) to infer the height of the detected feature, irrespective of what was tracked. This paper presents a method based on a closer link between the pixels used for tracking and their HA. The individual contribution to the overall tracking cross-correlation coefficient is used to identify the most significant pixels contributing to the tracking. This approach has been implemented operationally at European Organisation for the Exploitation of Meteorological Satellites (EUMETSAT) to derive AMVs since September 2012. This paper details the method, gives specific examples, and provides a first glance at its performances and benefits for the operational AMV production.


2013 ◽  
Vol 22 (2) ◽  
pp. 178-186 ◽  
Author(s):  
S. K. Deb ◽  
C. M. Kishtawal ◽  
Inderpreet Kaur ◽  
P. K. Pal ◽  
A. S. Kiran Kumar

Sign in / Sign up

Export Citation Format

Share Document