A comparison of semi-active control strategies for the MR damper

2002 ◽  
Author(s):  
S.J. Dyke ◽  
B.F. Spencer
Keyword(s):  
Active Control ◽  
Control Strategies ◽  
Mr Damper

Semi-Active Helicopter Ground Resonance Suppression Using Magnetorheological Technology

2017 ◽  
Author(s):  
Ming Cheng ◽  
Zhaobo Chen
Keyword(s):  
Linear System ◽  
Active Control ◽  
Control Strategies ◽  
Classical Model ◽  
Mr Damper ◽  
System Stability ◽  
Flow Mode ◽  
Resonance Model ◽  
Ground Resonance ◽  
Stability Area

This paper discusses the semi-active control of helicopter ground resonance using magnetorheological (MR) damper. A dynamic model of a MR damper with bi-fold flow mode is built based on the hyperbolic tangent model and experimental data on mechanical properties; and its inverse model is derived for the control. An approximate analytical solution of a linear system is provided and a critical stability area is calculated according to the classical model of ground resonance and the method of determining the linear system stability. Then, Simulations are performed on the helicopter ground resonance model with three semi-active control strategies and the control performance is compared. Simulation results show that the comprehensive performance of the fuzzy skyhook control algorithm is superior to the on-off skyhook and continuous skyhook control algorithms.

scholarly journals On nonlinear dynamics of a parametrically excited pendulum using both active control and passive rotational (MR) damper

2017 ◽  
Vol 24 (9) ◽  
pp. 1587-1599 ◽  
Author(s):  
AM Tusset ◽  
FC Janzen ◽  
V Piccirillo ◽  
RT Rocha ◽  
JM Balthazar ◽  
...  
Keyword(s):  
Active Control ◽  
Chaotic Behavior ◽  
Control Strategies ◽  
Mr Damper ◽  
The Other ◽  
Parametric Uncertainties ◽  
Nonlinear Saturation ◽  
Saturation Control ◽  
Parametrically Excited ◽  
Pendulum Oscillation

This paper presents two control strategies for a parametrically excited pendulum with chaotic behavior. One of them considers active control obtained by nonlinear saturation control (NSC) and the other a passive rotational magnetorheological (MR) damper. Firstly, the active control problem was formulated in order to design the external torque for the pendulum, considering the NSC. Numerical simulations were carried out in order to show the effectiveness of this method for the active control of the pendulum oscillation. The ability of the control of the proposed NSC in suppression of the chaotic behavior, considering the proposed parameters, was tested by a sensitivity analysis to parametric uncertainties. In the case of the passive rotational MR damper, firstly the influence of the introduction of the MR in a pendulum was performed considering the 0-1 test. Different electric currents are applied to suppress the chaotic behavior of the system. The numerical results showed that the simple introduction of a passive rotational MR damper without electric current did not change the chaotic behavior of the system. However, it is possible to keep the pendulum oscillating with periodic behavior using the rotational MR damper with energizing discontinuity.

scholarly journals Active Control of Greenhouse Climate Enhances Papaya Growth and Yield at an Affordable Cost

Agronomy ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 378
Author(s):  
Irene Salinas ◽  
Juan José Hueso ◽  
Julián Cuevas
Keyword(s):  
Active Control ◽  
Skin Color ◽  
Natural Ventilation ◽  
Control Strategies ◽  
Soluble Solids ◽  
Growth And Yield ◽  
Climate Control ◽  
Tropical Fruit ◽  
Greenhouse Climate ◽  
Solids Content

Papaya is a tropical fruit crop that in subtropical regions depends on protected cultivation to fulfill its climate requirements and remain productive. The aim of this work was to compare the profitability of different climate control strategies in greenhouses located in subtropical areas of southeast Spain. To do so, we compared papayas growing in a greenhouse equipped with active climate control (ACC), achieved by cooling and heating systems, versus plants growing in another greenhouse equipped with passive climate control (PCC), consisting of only natural ventilation through zenithal and lateral windows. The results showed that ACC favored papaya plant growth; flowering; fruit set; and, consequently, yields, producing more and heavier fruits at an affordable cost. Climate control strategies did not significantly improve fruit quality, specifically fruit skin color, acidity, and total soluble solids content. In conclusion, in the current context of prices, an active control of temperature and humidity inside the greenhouse could be a more profitable strategy in subtropical regions where open-air cultivation is not feasible.

The Use of Damping Based Semi-Active Control Algorithms in the Mechanical Smart-Spring System

2017 ◽  
Vol 140 (2) ◽  
Author(s):  
Wander Gustavo Rocha Vieira ◽  
Fred Nitzsche ◽  
Carlos De Marqui
Keyword(s):  
Active Control ◽  
Control Algorithm ◽  
Control Strategies ◽  
Vibration Reduction ◽  
Flow Analysis ◽  
Coupled Systems ◽  
Control Technique ◽  
Control Algorithms ◽  
Control Techniques ◽  
Spring Mechanism

In recent decades, semi-active control strategies have been investigated for vibration reduction. In general, these techniques provide enhanced control performance when compared to traditional passive techniques and lower energy consumption if compared to active control techniques. In semi-active concepts, vibration attenuation is achieved by modulating inertial, stiffness, or damping properties of a dynamic system. The smart spring is a mechanical device originally employed for the effective modulation of its stiffness through the use of semi-active control strategies. This device has been successfully tested to damp aeroelastic oscillations of fixed and rotary wings. In this paper, the modeling of the smart spring mechanism is presented and two semi-active control algorithms are employed to promote vibration reduction through enhanced damping effects. The first control technique is the smart-spring resetting (SSR), which resembles resetting control techniques developed for vibration reduction of civil structures as well as the piezoelectric synchronized switch damping on short (SSDS) technique. The second control algorithm is referred to as the smart-spring inversion (SSI), which presents some similarities with the synchronized switch damping (SSD) on inductor technique previously presented in the literature of electromechanically coupled systems. The effects of the SSR and SSI control algorithms on the free and forced responses of the smart-spring are investigated in time and frequency domains. An energy flow analysis is also presented in order to explain the enhanced damping behavior when the SSI control algorithm is employed.

A shuffled frog-leaping algorithm based mixed-sensitivity H∞ control of a seismically excited structural building using MR dampers

2017 ◽  
Vol 24 (13) ◽  
pp. 2832-2852 ◽  
Author(s):  
Xiufang Lin ◽  
Shumei Chen ◽  
Guorong Huang
Keyword(s):  
Active Control ◽  
Passive Control ◽  
Structural Parameters ◽  
Mr Damper ◽  
Inverse Model ◽  
Shuffled Frog Leaping Algorithm ◽  
Weighting Functions ◽  
Inference System ◽  
Mr Dampers ◽  
Shuffled Frog Leaping

An intelligent robust controller, which combines a shuffled frog-leaping algorithm (SFLA) and an H∞ control strategy, is designed for a semi-active control system with magnetorheological (MR) dampers to reduce seismic responses of structures. Generally, the performance of mixed-sensitivity H∞ (MSH) control highly depends on expert experience in selecting the parameters of the weighting functions. In this study, as a recently-developed heuristic approach, a multi-objective SFLA with constraints is adopted to search for the optimal weighting functions. In the proposed semi-active control, firstly, based on the Bouc–Wen model, the forward dynamic characteristics of the MR damper are investigated through a series of tensile and compression experiments. Secondly, the MR damper inverse model is developed with an adaptive-network-based fuzzy inference system (ANFIS) technique. Finally, the SFLA-optimized MSH control approach integrated with the ANFIS inverse model is used to suppress the structural vibration. The simulation results for a three-story building model equipped with an MR damper verify that the proposed semi-active control method outperforms fuzzy control and two passive control methods. Besides, with the proposed strategy, the changes in structural parameters and earthquake excitations can be satisfactorily dealt with.

Comparative research on semi-active control strategies for magneto-rheological suspension

2009 ◽  
Vol 59 (3) ◽  
pp. 433-453 ◽  
Author(s):  
Xiao-min Dong ◽  
Miao Yu ◽  
Chang-rong Liao ◽  
Wei-min Chen
Keyword(s):  
Active Control ◽  
Comparative Research ◽  
Control Strategies ◽  
Magneto Rheological

Active Control of Elastodynamic Vibrations of a Flexible Mechanism With Piezoelectric Actuator

1999 ◽  
Author(s):  
Ching-I Chen
Keyword(s):  
Control Theory ◽  
Active Control ◽  
Piezoelectric Actuator ◽  
Control Strategies ◽  
Piezoelectric Actuators ◽  
Structural Vibration ◽  
Control Technique ◽  
Vibration Modes ◽  
Time Sharing ◽  
Transient Dynamic

Abstract This study focused on the application of active vibration control strategies for flexible moving structures which degrade into transient dynamic vibration problem. These control strategies are based primarily on modal control methods in which the flexible moving structures are controlled by reducing their dominant vibration modes. This work numerically investigated active control of the elastodynamic response of a four-bar mechanical system, using a piezoelectric actuator. A controller based on the modified independent modal space control theory was also utilized. This control theory produced overall excellent performance in terms of achieving the desired closed-loop structural damping. The merits of this technique include its ability to manage the spill-over effect, i.e. eliminate the magnitude of vibrations associated with uncontrolled modes, using only a few selected modes for control. This control was accomplished using a time sharing technique, which reduces the number of piezoelectric actuators required to control a large number of vibration modes. Furthermore, this algorithm implements a procedure for determining the optimal locations for the piezoelectric actuators. The dynamics of a steel four-bar linkage was selected with a flexible coupler separated by six elements and one piezoelectric actuator was used in the numerical simulation. The optimal actuator position was located at the third element from the right to the left. Results in this study demonstrated that a highly desired the structural vibration damping could be achieved. This control technique can be applied to transient dynamic systems.

Sign in / Sign up

Export Citation Format

Share Document