Pruned Distributed and Parallel Subarray Beamforming for 3-D Underwater Imaging With Fine-Grid Sparse Arrays

Author(s):  
Dongdong Zhao ◽  
Peng Chen ◽  
Yingtian Hu ◽  
Ronghua Liang ◽  
Haixia Wang ◽  
...  
2009 ◽  
Author(s):  
Fraser R. Dalgleish ◽  
Frank M. Caimi ◽  
Walter B. Britton
Keyword(s):  

Author(s):  
Yuanyu Yu ◽  
Jiujiang Wang ◽  
Xin Liu ◽  
Sio Hang Pun ◽  
Weibao Qiu ◽  
...  

Background:: Ultrasound is widely used in the applications of underwater imaging. Capacitive micromachined ultrasonic transducer (CMUT) is a promising candidate to the traditional piezoelectric ultrasonic transducer. In underwater ultrasound imaging, better resolutions can be achieved with a higher frequency ultrasound. Therefore, a CMUT array for high-frequency ultrasound imaging is proposed in this work. Methods:: Analytical methods are used to calculate the center frequency in water and the pull-in voltage for determining the operating point of CMUT. Finite element method model was developed to finalize the design parameters. The CMUT array was fabricated with a five-mask sacrificial release process. Results:: The CMUT array owned an immersed center frequency of 2.6 MHz with a 6 dB fractional bandwidth of 123 %. The pull-in voltage of the CMUT array was 85 V. An underwater imaging experiment was carried out with the target of three steel wires. Conclusion:: In this study, we have developed CMUT for high-frequency underwater imaging. The experiment showed that the CMUT can detect the steel wires with the diameter of 100 μm and the axial resolution was 0.582 mm, which is close to one wavelength of ultrasound in 2.6 MHz.


1993 ◽  
Vol 28 (10) ◽  
pp. 259-270 ◽  
Author(s):  
Karel Driesen
Keyword(s):  

Author(s):  
Trine S. Mykkeltvedt ◽  
Sarah E. Gasda ◽  
Tor Harald Sandve

AbstractCarbon-neutral oil production is one way to improve the sustainability of petroleum resources. The emissions from produced hydrocarbons can be offset by injecting capture CO$$_{2}$$ 2 from a nearby point source into a saline aquifer for storage or a producing oil reservoir. The latter is referred to as enhanced oil recovery (EOR) and would enhance the economic viability of CO$$_{2}$$ 2 sequestration. The injected CO$$_{2}$$ 2 will interact with the oil and cause it to flow more freely within the reservoir. Consequently, the overall recovery of oil from the reservoir will increase. This enhanced oil recovery (EOR) technique is perceived as the most cost-effective method for disposing captured CO$$_{2}$$ 2 emissions and has been performed for many decades with the focus on oil recovery. The interaction between existing oil and injected CO$$_{2}$$ 2 needs to be fully understood to effectively manage CO$$_{2}$$ 2 migration and storage efficiency. When CO$$_{2}$$ 2 and oil mix in a fully miscible setting, the density can change non-linearly and cause density instabilities. These instabilities involve complex convective-diffusive processes, which are hard to model and simulate. The interactions occur at the sub-centimeter scale, and it is important to understand its implications for the field scale migration of CO$$_{2}$$ 2 and oil. In this work, we simulate gravity effects, namely gravity override and convective mixing, during miscible displacement of CO$$_{2}$$ 2 and oil. The flow behavior due to the competition between viscous and gravity effects is complex, and can only be accurately simulated with a very fine grid. We demonstrate that convection occurs rapidly, and has a strong effect on breakthrough of CO$$_{2}$$ 2 at the outlet. This work for the first time quantifies these effects for a simple system under realistic conditions.


2020 ◽  
Vol 68 ◽  
pp. 6402-6417
Author(s):  
Robin Rajamaki ◽  
Sundeep Prabhakar Chepuri ◽  
Visa Koivunen

2021 ◽  
Vol 13 (8) ◽  
pp. 1558
Author(s):  
Timmy Gambin ◽  
Kari Hyttinen ◽  
Maja Sausmekat ◽  
John Wood

The seabed can be considered as the world’s largest museum, and underwater sites explored and studied so far provide priceless information on human interaction with the sea. In recognition of the importance of this cultural resource, UNESCO, in its 2001 Convention on the Protection of the Underwater Cultural Heritage, determined that objects/sites should be preserved in situ, whilst also advocating for public access and sharing. The implementation of these principles is not without difficulties. Some states have opened up underwater sites to the public—mainly through diving, yet the vast majority of the world’s population does not dive. In Malta, 7000 years of human occupation is reflected in and on the landscape, and recent offshore surveys show that the islands’ long and complex history has also left an indelible mark on the seabed. Besides difficulties related to their protection and management, these sites also present a challenge with regard to sharing and communicating. Recent advances in underwater imaging and processing software have accelerated the development of 3D photogrammetry of submerged sites and the idea for a virtual museum was born. The virtual museum, UnderwaterMalta, was created out of a need to share the plethora of underwater sites located on the seabed of the Maltese Islands. A multitude of digital tools are used to share and communicate these sites, offering visitors a dry dive into submerged sites that would otherwise remain invisible to the vast majority of the public. This paper discusses the basic principle of the sharing of underwater cultural heritage and the difficulties that beset the implementation of such a principle. A detailed explanation and evaluation of the methods used to gather the raw data needed is set in the context of the particular and unique working conditions related to deep water sites. The workings of this paper are based on first-hand experiences garnered through the recording of numerous wrecks over the years and the creation and launch of The Virtual Museum-Underwater Malta—a comprehensive virtual museum specifically built for “displaying” underwater archaeological sites that are otherwise invisible to the general public.


Sign in / Sign up

Export Citation Format

Share Document