Power Method of the Electrohydraulic Complex Parameter Identification Based on the Physical Model

Author(s):  
Viktoriya Kovalchuk ◽  
Tetyana Korenkova ◽  
Dmytro Rodkin ◽  
Oleksii Kravets ◽  
Mohamed Zaidan Qawaqzeh
Author(s):  
C Song ◽  
J A Brandon ◽  
C A Featherston

The paper describes the development of distributed-element models for non-linear hysteresis in materials and structures. The physical model is based on an approach that views the system as comprising a series of ideal elastoplastic elements. Parameter identification, numerical simulation and inversion of the model through the application of the Preisach model for hysteresis are discussed. Experimentally obtained data using Nitinol are compared with the model prediction, thus establishing the effectiveness of distributed-element Preisach elements for predicting complex hysteresis effects including high-order hysteresis transition curves.


Author(s):  
Oleksii Timkov ◽  
Dmytro Yashchenko ◽  
Volodymyr Bosenko

The article deals with the development of a physical model of a car equipped with measuring, recording and remote control equipment for experimental study of car properties. A detailed description of the design of the physical model and of the electronic modules used is given, links to application libraries and the code of the first part of the program for remote control of the model are given. Atmega microcontroller on the Arduino Uno platform was used to manage the model and register the parameters. When moving the car on the memory card saved such parameters as speed, voltage on the motor, current on the motor, the angle of the steered wheel, acceleration along three coordinate axes are recorded. Use of more powerful microcontrollers will allow to expand the list of the registered parameters of movement of the car. It is possible to measure the forces acting on the elements of the car and other parameters. In the future, it is planned to develop a mathematical model of motion of the car and check its adequacy in conducting experimental studies on maneuverability on the physical model. In addition, it is possible to conduct studies of stability and consumption of electrical energy. The physical model allows to quickly change geometric dimensions and mass parameters. In the study of highway trains, this approach will allow to investigate the various layout schemes of highway trains in the short term. It is possible to make two-axle road trains and saddle towed trains, three-way hitched trains of different layout. The results obtained will allow us to improve not only the mathematical model, but also the experimental physical model, and move on to further study the properties of hybrid road trains with an active trailer link. This approach allows to reduce material and time costs when researching the properties of cars and road trains. Keywords: car, physical model, experiment, road trains, sensor, remote control, maneuverability, stability.


Author(s):  
E. M. Solovyov ◽  
V. I. Novikov ◽  
B. V. Spitsyn ◽  
M. R. Kiselev ◽  
V. A. Sorokin ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document