Design of tunable optical cavity based on near-field optical coupling between subwavelength periodic nanostructures

Author(s):  
W. Nakagawa
2001 ◽  
Vol 197 (4-6) ◽  
pp. 267-273 ◽  
Author(s):  
Jérôme Salvi ◽  
Dominique Barchiesi ◽  
Daniel Courjon

2002 ◽  
Vol 92 (2) ◽  
pp. 862-865 ◽  
Author(s):  
Masahiro Yoshita ◽  
Kazuko Koyama ◽  
Motoyoshi Baba ◽  
Hidefumi Akiyama

Author(s):  
Zerihun Gedeb Tegegne ◽  
Carlos Viana ◽  
Marc D. Rosales ◽  
Julien Schiellein ◽  
Jean-Luc Polleux ◽  
...  

A 10 × 10 μm2SiGe heterojunction bipolar photo-transistor (HPT) is fabricated using a commercial technological process of 80 GHz SiGe bipolar transistors (HBT). Its technology and structure are first briefly described. Its optimal opto-microwave dynamic performance is then analyzed versus voltage biasing conditions for opto-microwave continuous wave measurements. The optimal biasing points are then chosen in order to maximize the optical transition frequency (fTopt) and the opto-microwave responsivity of the HPT. An opto-microwave scanning near-field optical microscopy (OM-SNOM) is performed using these optimum bias conditions to localize the region of the SiGe HPT with highest frequency response. The OM-SNOM results are key to extract the optical coupling of the probe to the HPT (of 32.3%) and thus the absolute responsivity of the HPT. The effect of the substrate is also observed as it limits the extraction of the intrinsic HPT performance. A maximum optical transition frequency of 4.12 GHz and an absolute low frequency opto-microwave responsivity of 0.805A/W are extracted at 850 nm.


Sensors ◽  
2021 ◽  
Vol 21 (15) ◽  
pp. 5203
Author(s):  
Ying Fu ◽  
Tom Yager ◽  
George Chikvaidze ◽  
Srinivasan Iyer ◽  
Qin Wang

Infrared radiation reflection and transmission of a single layer of gold micropatch two-dimensional arrays, of patch length ∼1.0 μm and width ∼0.2 μm, have been carefully studied by a finite-difference time-domain (FDTD) method, and Fourier-transform infrared spectroscopy (FTIR). Through precision design of the micropatch array structure geometry, we achieve a significantly enhanced reflectance (85%), a substantial diffraction (10%), and a much reduced transmittance (5%) for an array of only 15% surface metal coverage. This results in an efficient far-field optical coupling with promising practical implications for efficient mid-infrared photodetectors. Most importantly we find that the propagating electromagnetic fields are transiently concentrated around the gold micropatch array in a time duration of tens of ns, providing us with a novel efficient near-field optical coupling.


2021 ◽  
Author(s):  
Frank Koppens ◽  
Hanan Herzig-Sheinfux ◽  
Lorenzo Orsini ◽  
Minwoo Jung ◽  
Iacopo Torre ◽  
...  

Abstract A conventional optical cavity supports one or more modes, which are confined since they are unable to leak out of the cavity. Bound state in continuum (BIC) cavities are an unconventional alternative, based on confinement by destructive interference, even though optical leakage channels are available. BICs are a general wave phenomenon, of particular interest to optics, but BICs have never been demonstrated at the nanoscale level. Nanoscale BIC cavities are more challenging to realize, however, as they require destructive interference at the nanometer scale. Here, we demonstrate the first nanophotonic cavities based on BIC and find an unprecedented combination of quality factors and ultrasmall mode volume. In particular, we exploit hyperbolic media, HyM, as they can support large (in principle unlimited) momentum excitations, which propagate as ultra-confined rays, so that HyM cavities can in principle be extremely small. However, building a hyperbolic BIC (hBIC) cavity presents a fundamental challenge: an hBIC has an infinite number of modes, which would all need to interfere simultaneously. Here, we bring the BIC concept to the nanoscale by introducing and demonstrating a novel multimodal reflection mechanism of the ray-like optical excitations in hyperbolic materials. Using near-field microscopy, we demonstrate mid-IR confinement in BIC-based nanocavities with volumes down to 23x23x3〖nm〗^3 and quality factors above 100 – a dramatic improvement in several metrics of confinement. This alliance of HyM with BICs yields a radically novel way to confine light and is expected to have far reaching consequences wherever strong optical confinement is utilized, from ultra-strong light-matter interactions, to mid-IR nonlinear optics and a range of sensing applications.


1999 ◽  
Vol 24 (24) ◽  
pp. 1811 ◽  
Author(s):  
Jérôme Salvi ◽  
Daniel Courjon
Keyword(s):  

2017 ◽  
Vol 26 (01n02) ◽  
pp. 1740005 ◽  
Author(s):  
Zhu Diao ◽  
Vincent T. K. Sauer ◽  
Wayne K. Hiebert

Recent developments in integrated on-chip nano-optomechanical systems are reviewed. Silicon-based nano-optomechanical devices are fabricated by a two-step process, where the first step is a foundry-enabled photonic circuits patterning and the second step involves in-house mechanical device release. We show theoretically that the enhanced responsivity of near-field optical transduction of mechanical displacement in on-chip nano-optomechanical systems originates from the finesse of the optical cavity to which the mechanical device couples. An enhancement in responsivity of more than two orders of magnitude has been observed when compared side-by-side with free-space interferometry readout. We further demonstrate two approaches to facilitate large-scale device integration, namely, wavelength-division multiplexing and frequency-division multiplexing. They are capable of significantly simplifying the design complexity for addressing individual nano-optomechanical devices embedded in a large array.


2015 ◽  
Vol 112 (33) ◽  
pp. 10292-10297 ◽  
Author(s):  
Michael B. Ross ◽  
Jessie C. Ku ◽  
Martin G. Blaber ◽  
Chad A. Mirkin ◽  
George C. Schatz

Bottom-up assemblies of plasmonic nanoparticles exhibit unique optical effects such as tunable reflection, optical cavity modes, and tunable photonic resonances. Here, we compare detailed simulations with experiment to explore the effect of structural inhomogeneity on the optical response in DNA-gold nanoparticle superlattices. In particular, we explore the effect of background environment, nanoparticle polydispersity (>10%), and variation in nanoparticle placement (∼5%). At volume fractions less than 20% Au, the optical response is insensitive to particle size, defects, and inhomogeneity in the superlattice. At elevated volume fractions (20% and 25%), structures incorporating different sized nanoparticles (10-, 20-, and 40-nm diameter) each exhibit distinct far-field extinction and near-field properties. These optical properties are most pronounced in lattices with larger particles, which at fixed volume fraction have greater plasmonic coupling than those with smaller particles. Moreover, the incorporation of experimentally informed inhomogeneity leads to variation in far-field extinction and inconsistent electric-field intensities throughout the lattice, demonstrating that volume fraction is not sufficient to describe the optical properties of such structures. These data have important implications for understanding the role of particle and lattice inhomogeneity in determining the properties of plasmonic nanoparticle lattices with deliberately designed optical properties.


Sign in / Sign up

Export Citation Format

Share Document