A low cost lightning data logger using GPS time and SD card memory to the Amazon region

2015 ◽  
Author(s):  
Adonis Ferreira Raiol Leal ◽  
Brigida Ramati Pereira da Rocha
Keyword(s):  
Low Cost ◽  
Amazon Region ◽  
Data Logger ◽  
Sd Card

Development of Stand-Alone DC Energy Datalogger for Off- Grid PV System Application Based on Microcontroller

2021 ◽  
Vol 30 (1) ◽  
pp. 185-199
Author(s):  
Mohd Ruzaimi Ariffin ◽  
Suhaidi Shafie ◽  
Wan Zuha Wan Hasan ◽  
Norhafiz Azis ◽  
Mohammad Effendy Yaacob ◽  
...  
Keyword(s):  
Liquid Crystal Display ◽  
Low Cost ◽  
Voltage Divider ◽  
Data Logger ◽  
Pv System ◽  
Output Measurement ◽  
Current Output ◽  
Energy Meter ◽  
Recorded Data ◽  
Sd Card

This article presents a microcontroller-based direct current (DC) energy data logger developed by adapting low-cost ATmega328 by measuring the PV system DC and voltage characteristics while simultaneously recording the measured value over time to compute the energy production Watt-hour (Wh). The prototype logger has been tested on a live 1 kW standalone PV system where the voltage sensor detects PV series array output voltage ranging between 0–50 VDC by a voltage divider sensing circuit. For accurate sensing of the current output measurement from the PV array, 50A ACS756 hall effect IC was integrated as the current sensor. The data was measured and saved in text format with comma-separated values (CSV) in an SD card, read using Microsoft Excel software. The liquid crystal display (LCD) showed the actual value of the recording process’s current, voltage, power, and duration in minutes. The recorded data has been compared to the standard laboratory digital multimeter for calibration manually to justify the measurement value. The error is minimized to 0.6% average by varying the constant float value in the programming code. The advantage of developing this logger is that the development cost is much cheaper than the standard commercial PV energy meter, can be reproduced for other DC application energy measurements, and easily modify the voltage and current range to suit the application. Apart from that, this logger also provides high accuracy performance, and its independent characteristic is practical for off-grid or off-site PV system use.

scholarly journals Brief Communication: A low-cost Arduino<sup>®</sup>-based wire extensometer for earth flow monitoring

2017 ◽  
Vol 17 (6) ◽  
pp. 881-885 ◽  
Author(s):  
Luigi Guerriero ◽  
Giovanni Guerriero ◽  
Gerardo Grelle ◽  
Francesco M. Guadagno ◽  
Paola Revellino
Keyword(s):  
High Reliability ◽  
Low Cost ◽  
Mitigation Measures ◽  
Thermal Drift ◽  
Data Logger ◽  
Test Configuration ◽  
Flow Monitoring ◽  
Earth Flow ◽  
Flow Displacement ◽  
Additional Monitoring

Abstract. Continuous monitoring of earth flow displacement is essential for the understanding of the dynamic of the process, its ongoing evolution and designing mitigation measures. Despite its importance, it is not always applied due to its expense and the need for integration with additional sensors to monitor factors controlling movement. To overcome these problems, we developed and tested a low-cost Arduino-based wire-rail extensometer integrating a data logger, a power system and multiple digital and analog inputs. The system is equipped with a high-precision position transducer that in the test configuration offers a measuring range of 1023 mm and an associated accuracy of ±1 mm, and integrates an operating temperature sensor that should allow potential thermal drift that typically affects this kind of systems to be identified and corrected. A field test, conducted at the Pietrafitta earth flow where additional monitoring systems had been installed, indicates a high reliability of the measurement and a high monitoring stability without visible thermal drift.

Study on Coal Mine Gas Monitoring System Based on Arduino

2014 ◽  
Vol 1073-1076 ◽  
pp. 2173-2176 ◽  
Author(s):  
Hui Chun Gao ◽  
Chao Jun Fan ◽  
Jun Wen Li ◽  
Ming Kun Luo
Keyword(s):  
Monitoring System ◽  
Coal Mine ◽  
Low Cost ◽  
Gas Monitoring ◽  
Underground Coal Mine ◽  
Gas Concentration ◽  
Coal Mine Gas ◽  
Good Market ◽  
Mine Gas ◽  
Sd Card

Aimed at the frequency gas accident of coal mine, we designed a coal mine gas monitoring system based on Arduino microcontroller. The MQ-4 gas sensor was used to collect gas concentration, wireless ZigBee was used to transfer data of gas concentration to PC. The system can display gas concentration real-timely by LCD and use SD card to store the data. The system will send out sound and light alarm when the gas concentration overruns. Industrial tests have been carried out in Wuyang coal mine. Results show that gas monitoring system can well adapt to environment of underground coal mine and the measurement is accurate. The system is real-time monitoring and early warning. It has the characteristics of low power consumption, low cost, wireless, good market prospect.

scholarly journals Monitoring tidal hydrology in coastal wetlands with the Mini Buoy: applications for mangrove restoration

2020 ◽  
Author(s):  
Thorsten Balke ◽  
Alejandra Vovides ◽  
Christian Schwarz ◽  
Gail L. Chmura ◽  
Cai Ladd ◽  
...  
Keyword(s):  
Salt Marshes ◽  
Low Cost ◽  
Concept Design ◽  
Data Logger ◽  
Mangrove Restoration ◽  
Restoration Planning ◽  
In Situ Data ◽  
Data Loggers ◽  
Intertidal Wetlands ◽  
Tidal Hydrology

Abstract. Acquiring in-situ data of tidal flooding is key for the successful restoration planning of intertidal wetlands such as salt marshes and mangroves. However, monitoring spatially explicit inundation time series and tidal currents can be costly and technically challenging. With the increasing availability of low-cost sensors and data loggers, customized solutions can now be designed to monitor intertidal hydrodynamics with direct applications for restoration and management. In this study, we present the design, calibration, and application of the Mini Buoy, a low-cost bottom-mounted float containing an acceleration data logger for monitoring tidal inundation characteristics and current velocities derived from single-axis equilibrium acceleration (i.e. logger tilt). The acceleration output of the Mini Buoys was calibrated against water-level and current velocity data in the hypertidal Bay of Fundy, Canada, and in a tidally reconnected former aquaculture pond complex in North Sumatra, Indonesia. Key parameters, such as submersion time and current velocities during submergence can be determined over several months using the Mini Buoy. An open-source application was developed to generate ecologically meaningful hydrological information from the Mini Buoy data for mangrove restoration planning. We present this specific SE Asian mangrove restoration application alongside a flexible concept design for the Mini Buoy to be customized for research and management of intertidal wetlands worldwide.

scholarly journals Monitoring tidal hydrology in coastal wetlands with the “Mini Buoy”: applications for mangrove restoration

2021 ◽  
Vol 25 (3) ◽  
pp. 1229-1244
Author(s):  
Thorsten Balke ◽  
Alejandra Vovides ◽  
Christian Schwarz ◽  
Gail L. Chmura ◽  
Cai Ladd ◽  
...  
Keyword(s):  
Salt Marshes ◽  
Low Cost ◽  
Concept Design ◽  
Data Logger ◽  
Mangrove Restoration ◽  
Restoration Planning ◽  
In Situ Data ◽  
Data Loggers ◽  
Intertidal Wetlands ◽  
Tidal Hydrology

Abstract. Acquiring in situ data of tidal flooding is key for the successful restoration planning of intertidal wetlands such as salt marshes and mangroves. However, monitoring spatially explicit inundation time series and tidal currents can be costly and technically challenging. With the increasing availability of low-cost sensors and data loggers, customized solutions can now be designed to monitor intertidal hydrodynamics with direct applications for restoration and management. In this study, we present the design, calibration, and application of the “Mini Buoy”, a low-cost underwater float containing an acceleration data logger for monitoring tidal inundation characteristics and current velocities derived from single-axis equilibrium acceleration (i.e. logger tilt). The acceleration output of the Mini Buoys was calibrated against water-level and current-velocity data in the hypertidal Bay of Fundy, Canada, and in a tidally reconnected former aquaculture pond complex in North Sumatra, Indonesia. Key parameters, such as submersion time and current velocities during submergence, can be determined over several months using the Mini Buoy. An open-source application was developed to generate ecologically meaningful hydrological information from the Mini Buoy data for mangrove restoration planning. We present this specific SE Asian mangrove restoration application alongside a flexible concept design for the Mini Buoy to be customized for research and management of intertidal wetlands worldwide.

Low-cost Open-source 12-channel MPPT Data Logger for Solar Cell Research

2021 ◽  
Author(s):  
Michael D. Kelzenberg ◽  
Samuel P. Loke ◽  
Harry A. Atwater
Keyword(s):  
Solar Cell ◽  
Open Source ◽  
Low Cost ◽  
Data Logger

scholarly journals Open-source Arduino-compatible data loggers designed for field research

2019 ◽  
Vol 23 (4) ◽  
pp. 2065-2076 ◽  
Author(s):  
Andrew D. Wickert ◽  
Chad T. Sandell ◽  
Bobby Schulz ◽  
Gene-Hua Crystal Ng
Keyword(s):  
Open Source ◽  
Low Cost ◽  
Field Research ◽  
Environmental Sensors ◽  
Data Logger ◽  
Alkaline Batteries ◽  
Data Loggers ◽  
Open Source Data ◽  
Source Data ◽  
The Usa

Abstract. Automated electronic data loggers revolutionized environmental monitoring by enabling reliable high-frequency measurements. However, the potential to monitor the complex environmental interactions involved in global change has not been fully realized due to the high cost and lack of modularity of commercially available data loggers. Responding to this need, we developed the ALog (Arduino logger) series of three open-source data loggers, based on the popular and easy-to-program Arduino microcontroller platform. ALog data loggers are low cost, lightweight, and low power; they function between −30 and +60 ∘C, can be powered by readily available alkaline batteries, and can store up to 32 GB of data locally. They are compatible with standard environmental sensors, and the ALog firmware library may be expanded to add additional sensor support. The ALog has measured parameters linked to weather, streamflow, and glacier melt during deployments of days to years at field sites in the USA, Canada, Argentina, and Ecuador. The result of this work is a robust and field-tested open-source data logger that is the direct descendant of dozens of individuals' contributions to the growing open-source electronics movement.

scholarly journals Low-Cost and Secure Communication System for SCADA System of Remote Microgrids

2019 ◽  
Vol 2019 ◽  
pp. 1-12 ◽  
Author(s):  
Amjad Iqbal ◽  
M. Tariq Iqbal
Keyword(s):  
Data Storage ◽  
Communication System ◽  
Secure Communication ◽  
Low Cost ◽  
Data Logging ◽  
Local Data ◽  
Authentication Code ◽  
Power Efficient ◽  
Scada System ◽  
Sd Card

Renewable energy-based local microgrids are gaining popularity despite the unavailability of low-cost, power efficient, and secure communication system for its supervisory control and data acquisition (SCADA) system. This research has been carried out to address this issue along with the additional features such as data uploading to a server through a gateway, local data logging, and alerting the concerned crew in case of any fault to minimize the outage time. This paper presents the design of a communication system for the SCADA system of microgrid. ESP32 with LoRa has been used for communication between two nodes or a node and central SCADA unit. Communication security has been achieved by implementing AES cryptography. Data authenticity has been achieved by introducing a unique message authentication code (MAC) for each message. A mesh-like network has been implemented to improve the LoRa range. ESP32 and dragino-uno based LoRa gateways have been tried for uploading the data to the server, and local data storage has been achieved using an SD card. The main controller working as the SCADA unit has the feature of sending emails. Detailed system design and test results are presented in this paper.

Sign in / Sign up

Export Citation Format

Share Document