Study on Impact Characteristics of 35kV Tower with Conductive Concrete Based on EMTP

Author(s):  
Ren Hongtao
Author(s):  
Mohamad Alsaadi ◽  
Bashar Younus ◽  
Ahmet Erklig ◽  
Mehmet Bulut ◽  
Omer Bozkurt ◽  
...  

The influence of various graphene nano-platelets (GNPs) content on the tensile, flexural and Charpy impact characteristics of carbon, Kevlar and hybrid carbon/Kevlar fibers reinforced epoxy matrix composites was investigated. Both of composite configurations as carbon and Kevlar at outer and core skins were experimentally tested. The SEM images for flexural specimens were taken to observe the adhesion mechanism of GnPs particles with fiber/epoxy system. It is found that hybridization with Kevlar layers is contributed a positive effect on the hybrid carbon/Kevlar laminate structures in terms of tensile, flexural and impact behaviour. The incorporation of GnPs particles in hybrid and non-hybrid composite samples results in significant improvements in tensile, flexural and impact properties, and the greatest improvement occurs within the GnPs particle content of 0.1 and 0.25 wt%, indicating that the interfacial bonding between the matrix and the fibers is better due to the large surface area of the GnPs and the good entanglement between the GnPs layers and the matrix chains. The samples of impact test are experimented for edgewise and flatwise directions.


Author(s):  
Rupert Gleissl ◽  
Ronald Deslandes ◽  
Andre Baeten

2019 ◽  
Vol 174 ◽  
pp. 1321-1331 ◽  
Author(s):  
Laoyin Chen ◽  
Qinfeng Di ◽  
Erbiao Lou ◽  
Bo Zhou ◽  
He Zhang ◽  
...  

2017 ◽  
Vol 2 (3) ◽  
pp. 226-231
Author(s):  
Basim M. Fadhil ◽  
Payman Sahbah Ahmed ◽  
Ava Ali Kamal

Impact characteristics of Epoxy matrix composites is investigated by impact machine. Four different types of reinforcement are used in the experimental works: type one: 1.9wt% steel fiber, 1.9wt% carbon fiber,1.9 wt% carbon nanotube, 1.9 wt% woven carbon fiber.This work shows that reinforcing epoxy with (1.9 wt% of woven carbon fiber) improves the impact properties where energy, force and deformation values of impact test for this composite were 18.4J, 3580.59 N and 18 mm respectively while for epoxy were 2.927 J, 921.849 N and 18.413 mm respectively.


2021 ◽  
Author(s):  
Geoffrey Lerner ◽  
Susanna Jenkins ◽  
Sylvain Charbonnier ◽  
Jean-Christophe Komorowski ◽  
Peter Baxter

Pyroclastic density currents (PDCs) that escape their confining channels are among the most dangerous of volcanic hazards. These unconfined PDCs are capable of inundating inhabited areas that may be unprepared for these hazards, resulting in significant loss of life and damage to infrastructure. Despite their ability to cause serious impacts, unconfined PDCs have previously only been described for a limited number of specific case studies. Here, we carry out a broader comparative study that reviews the different types of unconfined PDCs, their deposits, dynamics and impacts, as well as the relationships between each element. Unconfined PDCs exist within a range of concentration, velocity and temperature: characteristics that are important in determining their impact. We define four end-member unconfined PDCs: 1. fast overspill flows, 2. slow overspill flows, 3. high-energy surges, and 4. low-energy detached surges (LEDS), and review characteristics and incidents of each from historical eruptions. These four end-members were all observed within the 2010 eruptive sequence of Merapi, Indonesia. We use this well-studied eruption as a case study, in particular the villages of Bakalan, 13 km south, and Bronggang 14 km south of the volcano, which were impacted by slow overspill flows and LEDS, respectively. These two unconfined PDC types are the least described from previous eruptions, but during the Merapi eruption the overspill flow resulted in building destruction and the LEDS in significant loss of life. We discuss the dynamics and deposits of these unconfined PDCs, and the resultant impacts. We then use the lessons learned from the 2010 Merapi eruption to assess some of the impacts associated with the deadly 2018 Fuego, Guatemala eruption. Satellite imagery and media images supplementing fieldwork were used to determine the presence of both overspill flows and LEDS, which resulted in the loss of hundreds of lives and the destruction of hundreds of buildings in inundated areas within 9 km of the summit. By cataloguing unconfined PDC characteristics, dynamics and impacts, we aim to highlight the importance and value of accounting for such phenomena in emergency management and planning at active volcanoes.


2021 ◽  
Vol 1019 ◽  
pp. 3-11
Author(s):  
Niranjan Pattar ◽  
S.F. Patil ◽  
Pratik Patil ◽  
Iranna Anikivi ◽  
Shridhar Hiremath

Embedding smart materials in the composite to enhance mechanical strength have become a research hotspot owing to their unique properties. The present research also focus on novel way to fabricate composite by embedding Shape Memory Alloy (SMA) wire and montmorillonite (MMT) nanoclay by varying clay concentration (0-7 wt.%). The extent of dispersion of nanoclay in epoxy resin was studied using Transmission Electron Microscopy (TEM) and X-ray diffraction (XRD). Fabricated samples were examined for tensile, flexural and impact characteristics. Scanning Electron Microscopy (SEM) was used to study the adhesion, delamination and damage occurred within the composite due to tensile loading. Results shows that the tensile strength, flexural strength and impact energy of SMA/MMT/glass/epoxy composite was improved by 23%, 21% and 57% respectively, when it was compared with composite with glass/epoxy composite.


Sign in / Sign up

Export Citation Format

Share Document