scholarly journals Efficient and Flexible Sensitivity Matrix Computation for Adaptive Electrical Capacitance Volume Tomography

Author(s):  
Daniel Ospina Acero ◽  
Shah M. Chowdhury ◽  
Qussai M. Marashdeh ◽  
Fernando L. Teixeira
2016 ◽  
Vol 10 (4) ◽  
pp. 150
Author(s):  
Irfana Kabir Ahmad ◽  
Muhammad Mukhlisin ◽  
Hassan Basri

<strong><strong></strong></strong><p>Tomography is a technique used to produce true reconstructed images from signal data. This data projection is measured capacitance by numerous sensors located on the surface of the object at different position. Sensitivity matrix with three-dimensional variation, especially in axial (z-axiz) direction are required for imaging a three-dimensional object to differentiate the depth along the sensor length so that the electrical field intensity can be distributed equally all over the three dimension space. In ECVT, when a dielectric material is introduced into the vessel, the variation in the electrical capacitance between all possible combinations of electrodes are measured. These changes are caused by diference in the permittivity of that material. From these capacitance measurements, an image based on the variation of the permittivity of the cross section contents can be obtained. In this study a numerical model using combine COMSOL MULTIPHYSICS v3.5 and MATLAB 2008a for imaging of an object was developed. Three different position of rectangular sensor: 1-sided sensor, 3-sided and U-shape sensor was designed and analyzed. 1-sided sensor displayed comparatively more uniform in both radial and axial direction in the comparisons of sensitivity distribution.</p>


2015 ◽  
Vol 11 (1) ◽  
pp. 2897-2908
Author(s):  
Mohammed S.Aljohani

Tomography is a non-invasive, non-intrusive imaging technique allowing the visualization of phase dynamics in industrial and biological processes. This article reviews progress in Electrical Capacitance Volume Tomography (ECVT). ECVT is a direct 3D visualizing technique, unlike three-dimensional imaging, which is based on stacking 2D images to obtain an interpolated 3D image. ECVT has recently matured for real time, non-invasive 3-D monitoring of processes involving materials with strong contrast in dielectric permittivity. In this article, ECVT sensor design, optimization and performance of various sensors seen in literature are summarized. Qualitative Analysis of ECVT image reconstruction techniques has also been presented.


2017 ◽  
Author(s):  
Didied Haryono ◽  
Sri Harjanto ◽  
Harisma Nugraha ◽  
Mahfudz Al Huda ◽  
Warsito Purwo Taruno

Sensors ◽  
2010 ◽  
Vol 10 (3) ◽  
pp. 1890-1917 ◽  
Author(s):  
Fei Wang ◽  
Qussai Marashdeh ◽  
Liang-Shih Fan ◽  
Warsito Warsito

Author(s):  
Warsito P. Taruno ◽  
Muhammad F. Ihsan ◽  
Marlin R. Baidillah ◽  
Timothy Tandian ◽  
Mahdi Mahendra ◽  
...  

2014 ◽  
Vol 896 ◽  
pp. 701-705
Author(s):  
Iriwn Maulana ◽  
Didied Haryono ◽  
Warsito P. Taruno ◽  
Mahfudz Al Huda ◽  
Marlin Baidillah ◽  
...  

A preliminary study about the development of Electrical Capacitance Volume Tomography (ECVT) for determining moisture, calorie and the flow of coal mass real-time on the conveyor has been done. This study aims to examine the capability and sensitivity of ECVT as a capacitance measurement system to investigate the correlation between moisture in coal and its dielectric property. The ECVT system comprises of a 2-channel rectangular sensor, data acquisition system and a computer system to control the measurement, process data and display the data of normalized capacitance of coal as the result. The linear correlation between moisture in coal and data of coal relative capacitance is obtained and presented in this paper. The results have shown that ECVT has good capability and sensitivity as a system to monitor the dielectric property and behavior of coal which are affected by the moisture content


Author(s):  
Warsito P. Taruno ◽  
Marlin R. Baidillah ◽  
Rommy I. Sulaiman ◽  
Arbai Yusuf ◽  
Wahyu Widada ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document