Integral Benchmark Experiments on a Large Copper Block Using the GELINA Accelerator to Validate natCu Neutron Cross Sections From Different Neutron Cross-Sectional Databases

2019 ◽  
Vol 47 (6) ◽  
pp. 2943-2949
Author(s):  
Mario Pillon ◽  
Maurizio Angelone ◽  
Fabio Moro ◽  
Dong Hwan Dani Kim ◽  
Markus Nyman ◽  
...  
Keyword(s):  
Cross Sections ◽  
Copper Block ◽  
Cross Sectional ◽  
Neutron Cross Sections

Gender determination of caucasoid hair using image analysis

1993 ◽  
Vol 51 ◽  
pp. 216-217
Author(s):  
T.B. Ball ◽  
W.M. Hess
Keyword(s):  
Image Analysis ◽  
Cross Sections ◽  
Scalp Hair ◽  
The Body ◽  
Equivalent Diameter ◽  
Cross Sectional ◽  
Hair Samples ◽  
Length Width ◽  
Morphological Differences

It has been demonstrated that cross sections of bundles of hair can be effectively studied using image analysis. These studies can help to elucidate morphological differences of hair from one region of the body to another. The purpose of the present investigation was to use image analysis to determine whether morphological differences could be demonstrated between male and female human Caucasian terminal scalp hair.Hair samples were taken from the back of the head from 18 caucasoid males and 13 caucasoid females (Figs. 1-2). Bundles of 50 hairs were processed for cross-sectional examination and then analyzed using Prism Image Analysis software on a Macintosh llci computer. Twenty morphological parameters of size and shape were evaluated for each hair cross-section. The size parameters evaluated were area, convex area, perimeter, convex perimeter, length, breadth, fiber length, width, equivalent diameter, and inscribed radius. The shape parameters considered were formfactor, roundness, convexity, solidity, compactness, aspect ratio, elongation, curl, and fractal dimension.

Automated 3D measurement of fiber cross section morphology in handsheets

2012 ◽  
Vol 27 (2) ◽  
pp. 264-269 ◽  
Author(s):  
Christian Lorbach ◽  
Ulrich Hirn ◽  
Johannes Kritzinger ◽  
Wolfgang Bauer
Keyword(s):  
Image Analysis ◽  
Cross Section ◽  
Cross Sections ◽  
Image Plane ◽  
3D Measurement ◽  
Cross Sectional ◽  
Fiber Cross Section ◽  
Fiber Wall ◽  
Sectional Shape ◽  
Cross Section Geometry

Abstract We present a method for 3D measurement of fiber cross sectional morphology from handsheets. An automated procedure is used to acquire 3D datasets of fiber cross sectional images using an automated microtome and light microscopy. The fiber cross section geometry is extracted using digital image analysis. Simple sample preparation and highly automated image acquisition and image analysis are providing an efficient tool to analyze large samples. It is demonstrated that if fibers are tilted towards the image plane the images of fiber cross sections are always larger than the true fiber cross section geometry. In our analysis the tilting angles of the fibers to the image plane are measured. The resulting fiber cross sectional images are distorted to compensate the error due to fiber tilt, restoring the true fiber cross sectional shape. We use an approximated correction, the paper provides error estimates of the approximation. Measurement results for fiber wall thickness, fiber coarseness and fiber collapse are presented for one hardwood and one softwood pulp.

scholarly journals Undergraduate Measurements of Neutron Cross Sections

2015 ◽  
Vol 66 ◽  
pp. 641-648 ◽  
Author(s):  
S.F. Hicks ◽  
J.R. Vanhoy ◽  
A.J. French ◽  
Z.C. Santonil ◽  
B.P. Crider ◽  
...  
Keyword(s):  
Cross Sections ◽  
Neutron Cross Sections

scholarly journals Thermo-Hydraulic Performance of U-Tube Borehole Heat Exchanger with Different Cross-Sections

2021 ◽  
Vol 13 (6) ◽  
pp. 3255
Author(s):  
Aizhao Zhou ◽  
Xianwen Huang ◽  
Wei Wang ◽  
Pengming Jiang ◽  
Xinwei Li
Keyword(s):  
Heat Transfer ◽  
Heat Exchange ◽  
Heat Resistance ◽  
Cross Sections ◽  
Three Dimensional ◽  
Thermal Response ◽  
Transfer Efficiency ◽  
Cross Sectional ◽  
Heat Transfer Efficiency ◽  
Oval Tube

For reducing the initial GSHP investment, the heat transfer efficiency of the borehole heat exchange (BHE) system can be enhanced to reduce the number or depth of drilling. This paper proposes a novel and simple BHE design by changing the cross-sectional shape of the U-tube to increase the heat transfer efficiency of BHEs. Specifically, in this study, we (1) verified the reliability of the three-dimensional numerical model based on the thermal response test (TRT) and (2) compared the inlet and outlet temperatures of the different U-tubes at 48 h under the premise of constant leg distance and fluid area. Referent to the circular tube, the increases in the heat exchange efficiencies of the curved oval tube, flat oval tube, semicircle tube, and sector tube were 13.0%, 19.1%, 9.4%, and 14.8%, respectively. (3) The heat flux heterogeneity of the tubes on the inlet and outlet sides of the BHE, in decreasing order, is flat oval, semicircle, curved oval, sector, and circle shapes. (4) The temperature heterogeneity of the borehole wall in the BHE in decreasing order is circle, sector, curved oval, flat oval, and semicircle shapes. (5) Under the premise of maximum leg distance, referent to the heat resistance of the tube with a circle shape at 48 h, the heat exchange efficiency of the curved oval, flat oval, semicircle, and sector tubes increased 12.6%, 17.7%, 10.3%, and 7.8%, respectively. (6) We found that the adjustments of the leg distance and the tube shape affect the heat resistance by about 25% and 12%, respectively. (7) The flat-oval-shaped tube at the maximum leg distance was found to be the best tube design for BHEs.

scholarly journals Studies of neutron cross-sections important for spallation experiments using the activation method

2014 ◽  
Vol 533 ◽  
pp. 012051
Author(s):  
J Vrzalová ◽  
P Chudoba ◽  
A Krása ◽  
M Majerle ◽  
M Suchopár ◽  
...  
Keyword(s):  
Cross Sections ◽  
Activation Method ◽  
Neutron Cross Sections

Comparison of the Cross Sectional Area, the Loss in Volume and the Mechanical Properties of LAE442 and MgCa0.8 as Resorbable Magnesium Alloy Implants after 12 Months Implantation Duration

2010 ◽  
Vol 638-642 ◽  
pp. 675-680 ◽  
Author(s):  
Martina Thomann ◽  
Nina von der Höh ◽  
Dirk Bormann ◽  
Dina Rittershaus ◽  
C. Krause ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Cross Sections ◽  
Degradation Process ◽  
Cross Sectional Area ◽  
Bending Test ◽  
Sectional Area ◽  
Cross Sectional ◽  
Initial Strength ◽  
Three Point Bending ◽  
The Cross

Current research focuses on magnesium based alloys in the course of searching a resorbable osteosynthetic material which provides sufficient mechanical properties besides a good biocompatibility. Previous studies reported on a favorable biocompatibility of the alloys LAE442 and MgCa0.8. The present study compared the degradation process of cylindrical LAE442 and MgCa0.8 implants after 12 months implantation duration. Therefore, 10 extruded implants (2.5 x 25 mm, cross sectional area 4.9 mm²) of both alloys were implanted into the medullary cavity of both tibiae of rabbits for 12 months. After euthanization, the right bone-implant-compound was scanned in a µ-computed tomograph (µCT80, ScancoMedical) and nine uniformly distributed cross-sections of each implant were used to determine the residual implants´ cross sectional area (Software AxioVisionRelease 4.5, Zeiss). Left implants were taken out of the bone carefully. After weighing, a three-point bending test was carried out. LAE442 implants degraded obviously slower and more homogeneously than MgCa0.8. The mean residual cross sectional area of LAE442 implants was 4.7 ± 0.07 mm². MgCa0.8 showed an area of only 2.18 ± 1.03 mm². In contrast, the loss in volume of LAE442 pins was more obvious. They lost 64 % of their initial weight. The volume of MgCa0.8 reduced clearly to 54.4 % which corresponds to the cross sectional area results. Three point bending tests revealed that LAE442 showed a loss in strength of 71.2 % while MgCa0.8 lost 85.6 % of its initial strength. All results indicated that LAE442 implants degraded slowly, probably due to the formation of a very obvious degradation layer. Degradation of MgCa0.8 implants was far advanced.

Sign in / Sign up

Export Citation Format

Share Document