On the bulk wave excitation by scattering of surface acoustic waves at a groove: an interior perturbation approach

2003 ◽  
Author(s):  
V. Jeoti ◽  
A. Jhunjhunwala
Author(s):  
Saeed Mohammadi ◽  
Abdelkrim Khelif ◽  
Ryan Westafer ◽  
Eric Massey ◽  
William D. Hunt ◽  
...  

Periodic elastic structures, called phononic crystals, show interesting frequency domain characteristics that can greatly influence the performance of acoustic and ultrasonic devices for several applications. Phononic crystals are acoustic counterparts of the extensively-investigated photonic crystals that are made by varying material properties periodically. Here we demonstrate the existence of phononic band-gaps for surface acoustic waves (SAWs) in a half-space of two dimensional phononic crystals consisting of hexagonal (honeycomb) arrangement of air cylinders in a crystalline Silicon background with low filling fraction. A theoretical calculation of band structure for bulk wave using finite element method is also achieved and shows that there is no complete phononic band gap in the case of the low filling fraction. Fabrication of the holes in Silicon is done by optical lithography and deep Silicon dry etching. In the experimental characterization, we have used slanted finger interdigitated transducers deposited on a thin layer of Zinc oxide (sputtered on top of the phononic crystal structure to excite elastic surface waves in Silicon) to cover a wide range of frequencies. We believe this to be the first reported demonstration of phononic band-gap for SAWs in a hexagonal lattice phononic crystal at such a high frequency.


2017 ◽  
Vol 821 ◽  
pp. 384-420 ◽  
Author(s):  
A. Riaud ◽  
M. Baudoin ◽  
O. Bou Matar ◽  
J.-L. Thomas ◽  
P. Brunet

When an acoustic wave travels in a lossy medium such as a liquid, it progressively transfers its pseudo-momentum to the fluid, which results in a steady flow called acoustic streaming. This phenomenon involves a balance between sound attenuation and shear, such that the streaming flow does not vanish in the limit of vanishing viscosity. Hence, the effect of viscosity has long been ignored in acoustic streaming experiments. Here, we investigate the acoustic streaming in sessile droplets exposed to surface acoustic waves. According to experimental data, the flow structure and velocity magnitude are both strongly influenced by the fluid viscosity. We compute the sound wave propagation and hydrodynamic flow motion using a numerical method that reduces memory requirements via a spatial filtering of the acoustic streaming momentum source terms. These calculations agree qualitatively well with experiments and reveal how the acoustic field in the droplet, which is dominated by a few caustics, controls the flow pattern. We evidence that chaotic acoustic fields in droplets are dominated by a few caustics. It appears that the caustics drive the flow, which allows for qualitative prediction of the flow structure. Finally, we apply our numerical method to a broader span of fluids and frequencies. We show that the canonical case of the acoustic streaming in a hemispherical sessile droplet resting on a lithium niobate substrate only depends on two dimensionless numbers related to the surface and bulk wave attenuation. Even in such a baseline configuration, we observe and characterize four distinct flow regimes.


2016 ◽  
Vol 10 (4) ◽  
pp. 564-573
Author(s):  
Ryo Tamon ◽  
◽  
Masaya Takasaki ◽  
Takeshi Mizuno ◽  

Surface acoustic waves (SAWs) excited by bursts of sinusoidal waves have been used in various applications. However, the SAW actuators used for this purpose are expensive because each SAW transducer must be equipped with a radio frequency linear amplifier and a function generator. To simplify the driving circuits of these actuators, SAW excitation using a pulse wave is proposed in this report. Simulated results for an equivalent circuit of a single interdigital transducer and measurements of SAWs excited by pulse waves are presented. The generation of tactile sensations using a SAW excited by a pulse wave is also reported. Furthermore, the power requirements for SAW excitation by a sinusoidal wave and by a pulse wave are compared.


1999 ◽  
Vol 591 ◽  
Author(s):  
E. Zolotoyabko

ABSTRACTThe pulse structure of synchrotron radiation was used in order to carry out timeresolved x-ray diffraction imaging of high-frequency (up to 0.6 GHz) surface acoustic waves propagating through a single crystal. In x-ray topographs, recorded in the stroboscopic mode, the short wavelength (down to 6 μm) individual wave fronts are clearly visible, providing information on the acoustic scattering processes with participation of lattice defects.


1978 ◽  
Vol 49 (12) ◽  
pp. 5924-5927 ◽  
Author(s):  
Yasuhiko Nakagawa ◽  
Tadahiko Dobashi ◽  
Yoshihiko Saigusa

Author(s):  
Kemining W. Yeh ◽  
Richard S. Muller ◽  
Wei-Kuo Wu ◽  
Jack Washburn

Considerable and continuing interest has been shown in the thin film transducer fabrication for surface acoustic waves (SAW) in the past few years. Due to the high degree of miniaturization, compatibility with silicon integrated circuit technology, simplicity and ease of design, this new technology has played an important role in the design of new devices for communications and signal processing. Among the commonly used piezoelectric thin films, ZnO generally yields superior electromechanical properties and is expected to play a leading role in the development of SAW devices.


1998 ◽  
Vol 77 (5) ◽  
pp. 1195-1202
Author(s):  
Andreas Knabchen Yehoshua, B. Levinson, Ora

Sign in / Sign up

Export Citation Format

Share Document