scholarly journals Real-time centroid moment tensor determination for large earthquakes from local and regional displacement records

2011 ◽  
Vol 188 (2) ◽  
pp. 703-718 ◽  
Author(s):  
Diego Melgar ◽  
Yehuda Bock ◽  
Brendan W. Crowell
2012 ◽  
Vol 2 (1) ◽  
pp. 4 ◽  
Author(s):  
Takaki Iwata

This study examines the global earthquake detection capability of the Global Centroid Moment Tensor (GCMT) catalogue during the periods immediately following large earthquakes, including intermediate-depth (70 ≤ depth < 300 km) and deep (300 km ≤ depth) events. We have already shown that the detection capability beyond an aftershock zone degrades remarkably and that this condition persists for several hours after the occurrence of large shallow (depth < 70 km) earthquakes. Because an intermediate-depth or deep earthquake occasionally generates seismic waves with significant amplitudes, it is necessary to investigate the change in the detection capability caused by such events. To this end, from the GCMT catalogue, we constructed the time sequences of the earthquakes that occurred immediately after the large earthquakes, and stacked these time sequences. To these stacked sequences, we then applied a statistical model representing the magnitude-frequency distribution of all observed earthquakes. This model has a parameter that characterizes the detection capability, and the temporal variation of the parameter is estimated by means of a Bayesian approach with a piecewise linear function. Consequently, we find that the global detection capability is lower after the occurrence of shallow earthquakes with magnitudes ≥ 5.45, intermediate-depth earthquakes with magnitudes ≥ 5.95, and deep earthquakes with magnitudes ≥ 6.95.


2020 ◽  
Vol 222 (3) ◽  
pp. 1923-1935
Author(s):  
Jin Fang ◽  
Caijun Xu ◽  
Jianfei Zang ◽  
Yangmao Wen ◽  
Chuang Song ◽  
...  

SUMMARY The 2019 Mw 7.1 Ridgecrest earthquake opens an opportunity to investigate how soon we can produce a reliable fault geometry and subsequently a robust source model based on high-rate Global Positioning System (GPS) data. In this study, we conduct peak ground displacement (PGD) magnitude scaling, real-time centroid moment tensor (CMT) calculation and rapid kinematic slip inversion. We conclude that a four-station PGD warning with a magnitude of Mw 7.03 can be issued at 24 s after initiation of the rupture. Fast CMT inversion can initially recover the correct nodal planes at 30 s. The kinematic slip model reveals that the Mw 7.1 earthquake is a predominant dextral strike-slip event with both normal and thrust components resolved. The earthquake shows a bilateral rupture with a low propagation speed of ∼2.1 km s−1 and a slip maxima of ∼4 m. The total moment is 5.18 × 1019 N m (Mw 7.11). We further suggest that a reasonable source model will be available in a simulated real-time mode within 30 s after the earthquake occurring, without using full high-rate GPS waveforms. This research highlights the significance of high-rate GPS for rapid earthquake response and modelling of kinematic rupture, which is also generalized by the hypothetical real-time GPS analysis for the 2016 Mw 7.8 Kaikoura earthquake and the 2010 Mw 7.2 El Mayor-Cucapah earthquake.


2020 ◽  
Vol 91 (6) ◽  
pp. 3208-3222 ◽  
Author(s):  
Barbara Lolli ◽  
Daniele Randazzo ◽  
Gianfranco Vannucci ◽  
Paolo Gasperini

Abstract We implemented an automatic procedure to update in near-real time (daily to hourly) a homogeneous catalog of Italian instrumental seismicity to be used for forecasting experiments and other statistical analyses. The magnitudes of all events are homogeneously revalued to be consistent with Mw standard estimates made by the Global Centroid Moment Tensor project. For the time interval from 1960 to 15 April 2005, catalogs and online resources available for the Italian area were merged and all magnitudes were homogenized to Mw according to empirical relationships computed using the chi-square regression method, which properly consider the uncertainties of both variables. From 16 April 2005 to the present, an automatic procedure periodically downloads the data of the online bulletin of the Istituto Nazionale di Geofisica e Vulcanologia and of online moment tensor catalogs from respective websites, merges the different sources, and applies traditional magnitude conversions to Mw. The final catalog is provided on a website for public dissemination.


Author(s):  
Jianfei Zang ◽  
Caijun Xu ◽  
Yangmao Wen ◽  
Xiaohang Wang ◽  
Kefeng He

Abstract Using near-field high-rate Global Positioning System (GPS) displacements to invert for earthquake fault slips in real time has the potential to improve the accuracy of earthquake early warning or tsunami early warning. For such applications, real-time retrieval of high-accuracy GPS displacements is essential. Here, we report on rapid modeling of the 2019 Mw 7.1 Ridgecrest earthquake with real-time GPS displacements derived from a variometric approach with readily available broadcast ephemeris. This method calculates station variations in real time by differencing continuous phase observations and does not rely on precise orbit and clock information. The phase ambiguity is also removed, and thus the method does not suffer from a relatively long convergence time. To improve the accuracy of variometric displacements, we use a local spatial filter to decrease the influence of residual errors that cannot be removed completely by the time difference. We invert for the centroid moment tensor, static fault slips, and fault rupture process from the derived displacements. Our results show that all inverted models are available within about 65 s after the origin time of the earthquake and are comparable with models inverted by real-time precise point positioning displacements. This study highlights the great value of variometric displacements for the rapid earthquake source description with only broadcast ephemeris.


2012 ◽  
Vol 55 (4) ◽  
Author(s):  
Silvia Pondrelli ◽  
Simone Salimbeni ◽  
Paolo Perfetti ◽  
Peter Danecek

<p>In May 2012, a seismic sequence struck the Emilia region (northern Italy). The mainshock, of Ml 5.9, occurred on May 20, 2012, at 02:03 UTC. This was preceded by a smaller Ml 4.1 foreshock some hours before (23:13 UTC on May 19, 2012) and followed by more than 2,500 earthquakes in the magnitude range from Ml 0.7 to 5.2. In addition, on May 29, 2012, three further strong earthquakes occurred, all with magnitude Ml ≥5.2: a Ml 5.8 earthquake in the morning (07:00 UTC), followed by two events within just 5 min of each other, one at 10:55 UTC (Ml 5.3) and the second at 11:00 UTC (Ml 5.2). For all of the Ml ≥4.0 earthquakes in Italy and for all of the Ml ≥4.5 in the Mediterranean area, an automatic procedure for the computation of a regional centroid moment tensor (RCMT) is triggered by an email alert. Within 1 h of the event, a manually revised quick RCMT (QRCMT) can be published on the website if the solution is considered stable. In particular, for the Emilia seismic sequence, 13 QRCMTs were determined and for three of them, those with M &gt;5.5, the automatically computed QRCMTs fitted the criteria for publication without manual revision. Using this seismic sequence as a test, we can then identify the magnitude threshold for automatic publication of our QRCMTs.</p>


2020 ◽  
pp. 103-111
Author(s):  
Emad Abulrahman Mohammed Salih Al-Heety

Earthquakes occur on faults and create new faults. They also occur on  normal, reverse and strike-slip faults. The aim of this work is to suggest a new unified classification of Shallow depth earthquakes based on the faulting styles, and to characterize each class. The characterization criteria include the maximum magnitude, focal depth, b-constant value, return period and relations between magnitude, focal depth and dip of fault plane. Global Centroid Moment Tensor (GCMT) catalog is the source of the used data. This catalog covers the period from Jan.1976 to Dec. 2017. We selected only the shallow (depth less than 70kms) pure, normal, strike-slip and reverse earthquakes (magnitude ≥ 5) and excluded the oblique earthquakes. The majority of normal and strike-slip earthquakes occurred in the upper crust, while the reverse earthquakes occurred throughout the thickness of the crust. The main trend for the derived b-values for the three classes was: b normal fault>bstrike-slip fault>breverse fault.  The mean return period for the normal earthquake was longer than that of the strike-slip earthquakes, while the reverse earthquakes had the shortest period. The obtained results report the relationship between the magnitude and focal depth of the normal earthquakes. A negative significant correlation between the magnitude and dip class for the normal and reverse earthquakes is reported. Negative and positive correlation relations between the focal depth and dip class were recorded for normal and reverse earthquakes, respectively. The suggested classification of earthquakes provides significant information to understand seismicity, seismtectonics, and seismic hazard analysis.


Sign in / Sign up

Export Citation Format

Share Document