Kinetic evaluation of oxidative stability and physical degradation of soybean grains stored at different conditions

2018 ◽  
Vol 42 (10) ◽  
Author(s):  
Ricardo Scherer Pohndorf ◽  
Volnei Luiz Meneghetti ◽  
Flávia Fernandes Paiva ◽  
Maurício Oliveira ◽  
Moacir Cardoso Elias
Keyword(s):  
Oxidative Stability ◽  
Kinetic Evaluation ◽  
Physical Degradation

Experimental Assessment of the Practical Oxidative Stability of Lithium Thiophosphate Solid Electrolytes

2019 ◽  
Author(s):  
Georg Dewald ◽  
Saneyuki Ohno ◽  
Marvin Kraft ◽  
Raimund Koerver ◽  
Paul Till ◽  
...  
Keyword(s):  
Cyclic Voltammetry ◽  
Solid State ◽  
Oxidative Stability ◽  
Photoelectron Spectroscopy ◽  
Solid Electrolytes ◽  
Stability Limit ◽  
Lithium Ion ◽  
High Energy ◽  
Redox Activity ◽  
Solid State Batteries

<p>All-solid-state batteries are often expected to replace conventional lithium-ion batteries in the future. However, the practical electrochemical and cycling stability of the best-conducting solid electrolytes, i.e. lithium thiophosphates, are still critical issues that prevent long-term stable high-energy cells. In this study, we use <i>stepwise</i><i>cyclic voltammetry </i>to obtain information on the practical oxidative stability limit of Li<sub>10</sub>GeP<sub>2</sub>S<sub>12</sub>, a Li<sub>2</sub>S‑P<sub>2</sub>S<sub>5</sub>glass, as well as the argyrodite Li<sub>6</sub>PS<sub>5</sub>Cl solid electrolytes. We employ indium metal and carbon black as the counter and working electrode, respectively, the latter to increase the interfacial contact area to the electrolyte as compared to the commonly used planar steel electrodes. Using a stepwise increase in the reversal potentials, the onset potential at 25 °C of oxidative decomposition at the electrode-electrolyte interface is identified. X‑ray photoelectron spectroscopy is used to investigate the oxidation of sulfur(-II) in the thiophosphate polyanions to sulfur(0) as the dominant redox process in all electrolytes tested. Our results suggest that after the formation of these decomposition products, significant redox behavior is observed. This explains previously reported redox activity of thiophosphate solid electrolytes, which contributes to the overall cell performance in solid-state batteries. The <i>stepwise cyclic voltammetry</i>approach presented here shows that the practical oxidative stability at 25 °C of thiophosphate solid electrolytes against carbon is kinetically higher than predicted by thermodynamic calculations. The method serves as an efficient guideline for the determination of practical, kinetic stability limits of solid electrolytes. </p>

Experimental Assessment of the Practical Oxidative Stability of Lithium Thiophosphate Solid Electrolytes

2019 ◽  
Author(s):  
Georg Dewald ◽  
Saneyuki Ohno ◽  
Marvin Kraft ◽  
Raimund Koerver ◽  
Paul Till ◽  
...  
Keyword(s):  
Cyclic Voltammetry ◽  
Solid State ◽  
Oxidative Stability ◽  
Photoelectron Spectroscopy ◽  
Solid Electrolytes ◽  
Stability Limit ◽  
Lithium Ion ◽  
High Energy ◽  
Redox Activity ◽  
Solid State Batteries

<p>All-solid-state batteries are often expected to replace conventional lithium-ion batteries in the future. However, the practical electrochemical and cycling stability of the best-conducting solid electrolytes, i.e. lithium thiophosphates, are still critical issues that prevent long-term stable high-energy cells. In this study, we use <i>stepwise</i><i>cyclic voltammetry </i>to obtain information on the practical oxidative stability limit of Li<sub>10</sub>GeP<sub>2</sub>S<sub>12</sub>, a Li<sub>2</sub>S‑P<sub>2</sub>S<sub>5</sub>glass, as well as the argyrodite Li<sub>6</sub>PS<sub>5</sub>Cl solid electrolytes. We employ indium metal and carbon black as the counter and working electrode, respectively, the latter to increase the interfacial contact area to the electrolyte as compared to the commonly used planar steel electrodes. Using a stepwise increase in the reversal potentials, the onset potential at 25 °C of oxidative decomposition at the electrode-electrolyte interface is identified. X‑ray photoelectron spectroscopy is used to investigate the oxidation of sulfur(-II) in the thiophosphate polyanions to sulfur(0) as the dominant redox process in all electrolytes tested. Our results suggest that after the formation of these decomposition products, significant redox behavior is observed. This explains previously reported redox activity of thiophosphate solid electrolytes, which contributes to the overall cell performance in solid-state batteries. The <i>stepwise cyclic voltammetry</i>approach presented here shows that the practical oxidative stability at 25 °C of thiophosphate solid electrolytes against carbon is kinetically higher than predicted by thermodynamic calculations. The method serves as an efficient guideline for the determination of practical, kinetic stability limits of solid electrolytes. </p>

SOYBEAN AND SUNFLOWER BIODIESELS: EVALUATION OF OXIDATIVE STABILITY BY RANCIMAT AND DSC

2018 ◽  
Author(s):  
Igor de Mesquita Figueredo ◽  
Maria Alexsandra de Sousa Rios
Keyword(s):  
Oxidative Stability

KINETIC EVALUATION AND PROCESS PERFORMANCE OF A PILOT GAC-SBBR SYSTEM TREATING RECYCLED PAPER INDUSTRY WASTEWATER

2012 ◽  
Vol 11 (4) ◽  
pp. 829-839 ◽  
Author(s):  
Siti Rozaimah Sheikh Abdullah ◽  
Mohd Hafizuddin Muhamad ◽  
Abu Bakar Mohamad ◽  
Rakmi Abdul Rahman ◽  
Abdul Amir Hasan Kadhum
Keyword(s):  
Paper Industry ◽  
Process Performance ◽  
Recycled Paper ◽  
Kinetic Evaluation ◽  
Industry Wastewater

Oxidative Stability, Physicochemical, and Sensory Characteristics of Vegetable Oils at Their Induction Periods

2019 ◽  
Vol 48 (6) ◽  
pp. 649-660
Author(s):  
Mi So Kim ◽  
Da-Som Kim ◽  
Jin-Ju Cho ◽  
Seong Jun Hong ◽  
Chang Guk Boo ◽  
...  
Keyword(s):  
Oxidative Stability ◽  
Vegetable Oils ◽  
Sensory Characteristics ◽  
Induction Periods

The Impact of a Chemostat Discharge Containing Oil Degrading Bacteria on the Biological Kinetics of a Refinery Activated Sludge Process

1988 ◽  
Vol 20 (11-12) ◽  
pp. 131-136 ◽  
Author(s):  
A. D. Wong ◽  
C. D. Goldsmith
Keyword(s):  
Activated Sludge ◽  
Retention Time ◽  
Waste Treatment ◽  
Treatment Plant ◽  
Utilization Rate ◽  
Activated Sludge Process ◽  
Kinetic Evaluation ◽  
Degrading Bacteria ◽  
Waste Treatment Plant ◽  
The Impact

The effect of discharging specific oil degrading bacteria from a chemostat to a refinery activated sludge process was determined biokinetically. Plant data for the kinetic evaluation of the waste treatment plant was collected before and during treatment. During treatment, the 500 gallon chemostatic growth chamber was operated on an eight hour hydraulic retention time, at a neutral pH, and was fed a mixture of refinery wastewater and simple sugars. The biokinetic constants k (days−1), Ks (mg/L), and K (L/mg-day) were determined before and after treatment by Monod and Lineweaver-Burk plots. Solids discharged and effluent organic concentrations were also evaluated against the mean cell retention time (MCRT). The maximum utilization rate, k, was found to increase from 0.47 to 0.95 days−1 during the operation of the chemostat. Subsequently, Ks increased from 141 to 556 mg/L. Effluent solids were shown to increase slightly with treatment. However, this was acceptable due to the polishing pond and the benefit of increased ability to accept shock loads of oily wastewater. The reason for the increased suspended solids in the effluent was most likely due to the continual addition of bacteria in exponential growth that were capable of responding to excess substrate. The effect of the chemostatic addition of specific microbial inocula to the refinery waste treatment plant has been to improve the overall organic removal capacity along with subsequent gains in plant stability.

Cleaning oxidative-stability-index-equipment components

2016 ◽  
Vol 27 (9) ◽  
pp. 16-19
Author(s):  
Larissa Bueno-Borges ◽  
◽  
Marisa Regitano-d'Arce
Keyword(s):  
Oxidative Stability ◽  
Stability Index ◽  
Oxidative Stability Index
Sign in / Sign up

Export Citation Format

Share Document