Individual Tree Measurement in Tropical Environment using Terrestrial Laser Scanning

2015 ◽  
Vol 73 (5) ◽  
Author(s):  
Muhammad Zulkarnain Abdul Rahman ◽  
Zulkepli Majid ◽  
Md Afif Abu Bakar ◽  
Abd Wahid Rasib ◽  
Wan Hazli Wan Kadir
Keyword(s):  
Laser Scanning ◽  
Mean Squared Error ◽  
Tree Height ◽  
Point Clouds ◽  
Tree Crown ◽  
Individual Tree ◽  
Branch Diameter ◽  
Reference Tree ◽  
Crown Volume ◽  
Tree Branch

Detailed forest inventory and mensuration of individual trees have drawn attention of research society mainly to support sustainable forest management. This study aims at estimating individual tree attributes from high density point cloud obtained by terrestrial laser scanner (TLS). The point clouds were obtained over single reference tree and group of trees in forest area. The reference tree is treated as benchmark since detailed measurements of branch diameter were made on selected branches with different sizes and locations. Diameter at breast height (DBH) was measured for trees in forest. Furthermore tree height, height to crown base, crown volume and tree branch volume were also estimated for each tree. Branch diameter is estimated directly from the point clouds based on semi-automatic approach of model fitting i.e. sphere, ellipse and cylinder. Tree branch volume is estimated based on the volume of the fitted models. Tree height and height to crown base are computed using histogram analysis of the point clouds elevation. Tree crown volume is estimated by fitting a convex-hull on the tree crown. The results show that the Root Mean Squared Error (RMSE) of the estimated tree branch diameter does not have a specific trend with branch sizes and number of points used for fitting process. This explains complicated distribution of point clouds over the branches. Overall cylinder model produces good results with most branch sizes and number of point clouds for fitting. The cylinder fitting approach shows significantly better estimation results compared to sphere and ellipse fitting models.   

scholarly journals Predicting Growing Stock Volume of Eucalyptus Plantations Using 3-D Point Clouds Derived from UAV Imagery and ALS Data

Forests ◽  
2019 ◽  
Vol 10 (10) ◽  
pp. 905 ◽  
Author(s):  
Guerra-Hernández ◽  
Cosenza ◽  
Cardil ◽  
Silva ◽  
Botequim ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Basal Area ◽  
Remote Sensing Data ◽  
Tree Height ◽  
Point Clouds ◽  
Volume Estimation ◽  
P Value ◽  
Test Statistic ◽  
Individual Tree ◽  
Significant Difference

Estimating forest inventory variables is important in monitoring forest resources and mitigating climate change. In this respect, forest managers require flexible, non-destructive methods for estimating volume and biomass. High-resolution and low-cost remote sensing data are increasingly available to measure three-dimensional (3D) canopy structure and to model forest structural attributes. The main objective of this study was to evaluate and compare the individual tree volume estimates derived from high-density point clouds obtained from airborne laser scanning (ALS) and digital aerial photogrammetry (DAP) in Eucalyptus spp. plantations. Object-based image analysis (OBIA) techniques were applied for individual tree crown (ITC) delineation. The ITC algorithm applied correctly detected and delineated 199 trees from ALS-derived data, while 192 trees were correctly identified using DAP-based point clouds acquired from Unmanned Aerial Vehicles (UAV), representing accuracy levels of respectively 62% and 60%. Addressing volume modelling, non-linear regression fit based on individual tree height and individual crown area derived from the ITC provided the following results: Model Efficiency (Mef) = 0.43 and 0.46, Root Mean Square Error (RMSE) = 0.030 m3 and 0.026 m3, rRMSE = 20.31% and 19.97%, and an approximately unbiased results (0.025 m3 and 0.0004 m3) using DAP and ALS-based estimations, respectively. No significant difference was found between the observed value (field data) and volume estimation from ALS and DAP (p-value from t-test statistic = 0.99 and 0.98, respectively). The proposed approaches could also be used to estimate basal area or biomass stocks in Eucalyptus spp. plantations.

scholarly journals Automatic Delineation and Height Measurement of Regenerating Conifer Crowns under Leaf-Off Conditions Using UAV Imagery

2020 ◽  
Vol 12 (24) ◽  
pp. 4104
Author(s):  
Andrew J. Chadwick ◽  
Tristan R. H. Goodbody ◽  
Nicholas C. Coops ◽  
Anne Hervieux ◽  
Christopher W. Bater ◽  
...  
Keyword(s):  
Spatial Resolution ◽  
Picea Glauca ◽  
Pinus Contorta ◽  
Tree Height ◽  
Point Clouds ◽  
Strongly Correlated ◽  
Tree Crown ◽  
Height Measurement ◽  
Individual Tree ◽  
Fine Spatial Resolution

The increasing use of unmanned aerial vehicles (UAV) and high spatial resolution imagery from associated sensors necessitates the continued advancement of efficient means of image processing to ensure these tools are utilized effectively. This is exemplified in the field of forest management, where the extraction of individual tree crown information stands to benefit operational budgets. We explored training a region-based convolutional neural network (Mask R-CNN) to automatically delineate individual tree crown (ITC) polygons in regenerating forests (14 years after harvest) using true colour red-green-blue (RGB) imagery with an average ground sampling distance (GSD) of 3 cm. We predicted ITC polygons to extract height information using canopy height models generated from digital aerial photogrammetric (DAP) point clouds. Our approach yielded an average precision of 0.98, an average recall of 0.85, and an average F1 score of 0.91 for the delineation of ITC. Remote height measurements were strongly correlated with field height measurements (r2 = 0.93, RMSE = 0.34 m). The mean difference between DAP-derived and field-collected height measurements was −0.37 m and −0.24 m for white spruce (Picea glauca) and lodgepole pine (Pinus contorta), respectively. Our results show that accurate ITC delineation in young, regenerating stands is possible with fine-spatial resolution RGB imagery and that predicted ITC can be used in combination with DAP to estimate tree height.

scholarly journals Characterizing Seedling Stands Using Leaf-Off and Leaf-On Photogrammetric Point Clouds and Hyperspectral Imagery Acquired from Unmanned Aerial Vehicle

Forests ◽  
2019 ◽  
Vol 10 (5) ◽  
pp. 415 ◽  
Author(s):  
Mohammad Imangholiloo ◽  
Ninni Saarinen ◽  
Lauri Markelin ◽  
Tomi Rosnell ◽  
Roope Näsi ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Hyperspectral Imagery ◽  
Digital Terrain Model ◽  
Tree Height ◽  
Point Clouds ◽  
Tree Density ◽  
Tree Canopy ◽  
Tree Level ◽  
Species Classification ◽  
Individual Tree

Seedling stands are mainly inventoried through field measurements, which are typically laborious, expensive and time-consuming due to high tree density and small tree size. In addition, operationally used sparse density airborne laser scanning (ALS) and aerial imagery data are not sufficiently accurate for inventorying seedling stands. The use of unmanned aerial vehicles (UAVs) for forestry applications is currently in high attention and in the midst of quick development and this technology could be used to make seedling stand management more efficient. This study was designed to investigate the use of UAV-based photogrammetric point clouds and hyperspectral imagery for characterizing seedling stands in leaf-off and leaf-on conditions. The focus was in retrieving tree density and the height in young seedling stands in the southern boreal forests of Finland. After creating the canopy height model from photogrammetric point clouds using national digital terrain model based on ALS, the watershed segmentation method was applied to delineate the tree canopy boundary at individual tree level. The segments were then used to extract tree heights and spectral information. Optimal bands for calculating vegetation indices were analysed and used for species classification using the random forest method. Tree density and the mean tree height of the total and spruce trees were then estimated at the plot level. The overall tree density was underestimated by 17.5% and 20.2% in leaf-off and leaf-on conditions with the relative root mean square error (relative RMSE) of 33.5% and 26.8%, respectively. Mean tree height was underestimated by 20.8% and 7.4% (relative RMSE of 23.0% and 11.5%, and RMSE of 0.57 m and 0.29 m) in leaf-off and leaf-on conditions, respectively. The leaf-on data outperformed the leaf-off data in the estimations. The results showed that UAV imagery hold potential for reliably characterizing seedling stands and to be used to supplement or replace the laborious field inventory methods.

scholarly journals Individual Tree Crown Segmentation Directly from UAV-Borne LiDAR Data Using the PointNet of Deep Learning

Forests ◽  
2021 ◽  
Vol 12 (2) ◽  
pp. 131
Author(s):  
Xinxin Chen ◽  
Kang Jiang ◽  
Yushi Zhu ◽  
Xiangjun Wang ◽  
Ting Yun
Keyword(s):  
Deep Learning ◽  
Mean Squared Error ◽  
Mixed Forest ◽  
Point Clouds ◽  
Forest Plot ◽  
Forest Types ◽  
Tree Crown ◽  
Individual Tree ◽  
Learning Framework ◽  
Crown Defoliation

Accurate individual tree crown (ITC) segmentation from scanned point clouds is a fundamental task in forest biomass monitoring and forest ecology management. Light detection and ranging (LiDAR) as a mainstream tool for forest survey is advancing the pattern of forest data acquisition. In this study, we performed a novel deep learning framework directly processing the forest point clouds belonging to the four forest types (i.e., the nursery base, the monastery garden, the mixed forest, and the defoliated forest) to realize the ITC segmentation. The specific steps of our approach were as follows: first, a voxelization strategy was conducted to subdivide the collected point clouds with various tree species from various forest types into many voxels. These voxels containing point clouds were taken as training samples for the PointNet deep learning framework to identify the tree crowns at the voxel scale. Second, based on the initial segmentation results, we used the height-related gradient information to accurately depict the boundaries of each tree crown. Meanwhile, the retrieved tree crown breadths of individual trees were compared with field measurements to verify the effectiveness of our approach. Among the four forest types, our results revealed the best performance for the nursery base (tree crown detection rate r = 0.90; crown breadth estimation R2 > 0.94 and root mean squared error (RMSE) < 0.2m). A sound performance was also achieved for the monastery garden and mixed forest, which had complex forest structures, complicated intersections of branches and different building types, with r = 0.85, R2 > 0.88 and RMSE < 0.6 m for the monastery garden and r = 0.80, R2 > 0.85 and RMSE < 0.8 m for the mixed forest. For the fourth forest plot type with the distribution of crown defoliation across the woodland, we achieved the performance with r = 0.82, R2 > 0.79 and RMSE < 0.7 m. Our method presents a robust framework inspired by the deep learning technology and computer graphics theory that solves the ITC segmentation problem and retrieves forest parameters under various forest conditions.

scholarly journals Airborne laser scanning applied to eucalyptus stand inventory at individual tree level

2018 ◽  
Vol 53 (12) ◽  
pp. 1373-1382 ◽  
Author(s):  
Diogo Nepomuceno Cosenza ◽  
Vicente Paulo Soares ◽  
Helio Garcia Leite ◽  
José Marinaldo Gleriani ◽  
Cibele Hummel do Amaral ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Large Scale ◽  
Tree Height ◽  
Point Clouds ◽  
Equation System ◽  
Airborne Laser Scanning ◽  
Tree Level ◽  
Individual Tree ◽  
Local Maxima ◽  
Airborne Laser

Abstract: The objective of this work was to evaluate the application of airborne laser scanning (ALS) to a large-scale eucalyptus stand inventory by the method of individual trees, as well as to propose a new method to estimate tree diameter as a function of the height obtained from point clouds. The study was carried out in a forest area of 1,681 ha, consisting of eight eucalyptus stands with ages varying from four to seven years. After scanning, tree heights were obtained using the local maxima algorithm, and total wood stock by summing up individual volumes. To determine tree diameters, regressions fit using data measured in the inventory plots were used. The results were compared with the estimates obtained from field sampling. The equation system proposed is adequate to be applied to the tree height data derived from ALS point clouds. The tree individualization approach by local maxima filters is efficient to estimate number of trees and wood stock from ALS data, as long as the results are previously calibrated with field data.

Modelling growing stock volume of forest stands with various ALS area-based approaches

2021 ◽  
Author(s):  
Karolina Parkitna ◽  
Grzegorz Krok ◽  
Stanisław Miścicki ◽  
Krzysztof Ukalski ◽  
Marek Lisańczuk ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Mean Squared Error ◽  
Prediction Method ◽  
Forest Stand ◽  
Boosted Regression Trees ◽  
Forest Stands ◽  
Individual Tree ◽  
Growing Stock ◽  
Modelling Techniques ◽  
Stock Volume

Abstract Airborne laser scanning (ALS) is one of the most innovative remote sensing tools with a recognized important utility for characterizing forest stands. Currently, the most common ALS-based method applied in the estimation of forest stand characteristics is the area-based approach (ABA). The aim of this study was to analyse how three ABA methods affect growing stock volume (GSV) estimates at the sample plot and forest stand levels. We examined (1) an ABA with point cloud metrics, (2) an ABA with canopy height model (CHM) metrics and (3) an ABA with aggregated individual tree CHM-based metrics. What is more, three different modelling techniques: multiple linear regression, boosted regression trees and random forest, were applied to all ABA methods, which yielded a total of nine combinations to report. An important element of this work is also the empirical verification of the methods for estimating the GSV error for individual forest stand. All nine combinations of the ABA methods and different modelling techniques yielded very similar predictions of GSV for both sample plots and forest stands. The root mean squared error (RMSE) of estimated GSV ranged from 75 to 85 m3 ha−1 (RMSE% = 20.5–23.4 per cent) and from 57 to 64 m3 ha−1 (RMSE% = 16.4–18.3 per cent) for plots and stands, respectively. As a result of the research, it can be concluded that GSV modelling with the use of different ALS processing approaches and statistical methods leads to very similar results. Therefore, the choice of a GSV prediction method may be more determined by the availability of data and competences than by the requirement to use a particular method.

scholarly journals Adjudicating Perspectives on Forest Structure: How Do Airborne, Terrestrial, and Mobile Lidar-Derived Estimates Compare?

2021 ◽  
Vol 13 (12) ◽  
pp. 2297
Author(s):  
Jonathon J. Donager ◽  
Andrew J. Sánchez Meador ◽  
Ryan C. Blackburn
Keyword(s):  
Ponderosa Pine ◽  
Laser Scanning ◽  
Canopy Cover ◽  
Basal Area ◽  
Tree Height ◽  
Absolute Error ◽  
Forest Monitoring ◽  
Individual Tree ◽  
Structural Configurations ◽  
Individual Trees

Applications of lidar in ecosystem conservation and management continue to expand as technology has rapidly evolved. An accounting of relative accuracy and errors among lidar platforms within a range of forest types and structural configurations was needed. Within a ponderosa pine forest in northern Arizona, we compare vegetation attributes at the tree-, plot-, and stand-scales derived from three lidar platforms: fixed-wing airborne (ALS), fixed-location terrestrial (TLS), and hand-held mobile laser scanning (MLS). We present a methodology to segment individual trees from TLS and MLS datasets, incorporating eigen-value and density metrics to locate trees, then assigning point returns to trees using a graph-theory shortest-path approach. Overall, we found MLS consistently provided more accurate structural metrics at the tree- (e.g., mean absolute error for DBH in cm was 4.8, 5.0, and 9.1 for MLS, TLS and ALS, respectively) and plot-scale (e.g., R2 for field observed and lidar-derived basal area, m2 ha−1, was 0.986, 0.974, and 0.851 for MLS, TLS, and ALS, respectively) as compared to ALS and TLS. While TLS data produced estimates similar to MLS, attributes derived from TLS often underpredicted structural values due to occlusion. Additionally, ALS data provided accurate estimates of tree height for larger trees, yet consistently missed and underpredicted small trees (≤35 cm). MLS produced accurate estimates of canopy cover and landscape metrics up to 50 m from plot center. TLS tended to underpredict both canopy cover and patch metrics with constant bias due to occlusion. Taking full advantage of minimal occlusion effects, MLS data consistently provided the best individual tree and plot-based metrics, with ALS providing the best estimates for volume, biomass, and canopy cover. Overall, we found MLS data logistically simple, quickly acquirable, and accurate for small area inventories, assessments, and monitoring activities. We suggest further work exploring the active use of MLS for forest monitoring and inventory.

Potential for Individual Tree Monitoring in Ponderosa Pine-Dominated Forests Using Unmanned Aerial System Structure from Motion Point Clouds

2021 ◽  
Author(s):  
Matthew B. Creasy ◽  
Wade Travis Tinkham ◽  
Chad M. Hoffman ◽  
Jody C. Vogeler
Keyword(s):  
Forest Structure ◽  
Ponderosa Pine ◽  
Laser Scanning ◽  
Point Clouds ◽  
System Structure ◽  
Detection Methods ◽  
Unmanned Aerial System ◽  
Individual Tree ◽  
Detection Rates ◽  
Ponderosa Pine Forests

Characterization of forest structure is important for management-related decision making, monitoring, and adaptive management. Increasingly, observations of forest structure are needed at both finer resolutions and across greater extents to support spatially explicit management planning. Unmanned aerial system (UAS)-based photogrammetry provides an airborne method of forest structure data acquisition at a significantly lower cost and time commitment than existing methods such as airborne laser scanning (LiDAR). This study utilizes nearly 5,000 stem-mapped trees in ponderosa pine-dominated forests to evaluate several algorithms for detecting individual tree locations and characterizing crown area across tree sizes. Our results indicate that adaptive variable-window detection methods with UAS-based canopy height models have greater tree detection rates compared to fixed window analysis across a range of tree sizes. Using the UAS approach, probability of detecting individual trees decreases from 97% for dominant overstory to 67% for suppressed understory trees. Additionally, crown radii were correctly determined within 0.5 m for approximately two-thirds of sampled trees. These findings highlight the potential for UAS photogrammetry to characterize forest structure through the detection of trees and tree groups in open-canopy ponderosa pine forests. Further work should investigate how these methods transfer to more diverse species compositions and forest structures.

Sign in / Sign up

Export Citation Format

Share Document