Position Analysis of a New Family of 3-DOF Translational Parallel Manipulators*

2003 ◽  
Vol 125 (2) ◽  
pp. 316-322 ◽  
Author(s):  
Marco Carricato ◽  
Vincenzo Parenti-Castelli
Keyword(s):  
Inverse Analysis ◽  
Kinematic Chain ◽  
Parallel Manipulators ◽  
Numerical Examples ◽  
Position Analysis ◽  
New Family ◽  
Revolute Joints ◽  
Univariate Polynomial ◽  
Position Problem ◽  
Actuated Joints

This article presents the position analysis of a new family of 3-limbed 3-dof parallel manipulators, whose output links exhibit a motion of pure translation with respect to the base. Each limb contains four passive revolute joints and an active prismatic pair, which can be mounted anywhere along the kinematic chain or replaced by a fifth revolute one. A univariate polynomial has been found that solves the direct position problem wherever the actuators are placed. The inverse analysis has been carried out in closed-form for all possible locations of the actuated joints. Finally, numerical examples are provided.

Position Analysis of a New Family of 3-DOF Translational Parallel Manipulators

2001 ◽  
Author(s):  
Marco Carricato ◽  
Vincenzo Parenti-Castelli
Keyword(s):  
Inverse Analysis ◽  
Kinematic Chain ◽  
Parallel Manipulators ◽  
Numerical Examples ◽  
Position Analysis ◽  
New Family ◽  
Revolute Joints ◽  
Univariate Polynomial ◽  
Position Problem ◽  
Actuated Joints

Abstract This article presents the position analysis of a new family of 3-limbed 3-dof parallel manipulators, whose output links exhibit a motion of pure translation with respect to the base. Each limb contains four revolute joints and a prismatic pair, which can be mounted anywhere along the kinematic chain or replaced by a fifth revolute one. A univariate polynomial has been found that solves the direct position problem wherever the actuators are placed. The inverse analysis has been carried out in closed-form for all possible locations of the actuated joints. Finally, numerical examples are provided.

Evaluation of Topological Properties of Parallel Manipulators Based on the Topological Characteristic Indexes

Robotica ◽  
2019 ◽  
Vol 38 (8) ◽  
pp. 1381-1399 ◽  
Author(s):  
Huiping Shen ◽  
Ting-Li Yang ◽  
Ju Li ◽  
Dan Zhang ◽  
Jiaming Deng ◽  
...  
Keyword(s):  
Degrees Of Freedom ◽  
Dynamic Properties ◽  
Kinematic Chain ◽  
Parallel Manipulators ◽  
Design Guidelines ◽  
Design Knowledge ◽  
Topological Properties ◽  
Topological Characteristic ◽  
Actuated Joints ◽  
Selection Of

SUMMARYThe topological structure of a parallel manipulator (PM) determines its intrinsic topological properties (TPs). The TPs further determine essential kinematic and dynamic properties of the mechanism. TPs can be expressed through topological characteristics indexes (TCI). Therefore, defining a set of TCIs is an important issue to evaluate the TPs of PMs. This article addresses the evaluation of topological properties (ETP) of PMs based on TCI. A general and effective ETP method for PMs is proposed. Firstly, 12 TCIs are proposed, including 8 quantitative TCIs, that is, position and orientation characteristics sets (POC), dimension of the POC set, degrees of freedom (DOF), number of independent displacement equations, types and number of an Assur kinematic chain (AKC), coupling degrees of the AKCs, degrees of redundancy and the number of overs; as well as 4 qualitative TCIs, that is, selection of actuated joints, identification of inactive joints, DOF type and Input–Output motion decoupling. Secondly, the ETP method is illustrated by evaluating some well-known PMs including the Delta, Tricept, Exechon, Z3, H4 and the Gough–Stewart platform manipulators, as well as 28 other typical PMs. Via the ETP analysis of these mechanisms also some valuable design knowledge is derived and guidelines for the design of PMs are established. Finally, a 5-DOF decoupled hybrid spraying robot is developed by applying the design knowledge and the design guidelines derived from the ETP analysis.

Direct Position Analysis of a Particular Translational 3-URU Manipulator

2021 ◽  
pp. 1-22
Author(s):  
Raffaele Di Gregorio
Keyword(s):  
Problem Formulation ◽  
Parallel Manipulators ◽  
Equation System ◽  
Point Of View ◽  
Solution Technique ◽  
Algebraic Equations ◽  
Similar System ◽  
Position Analysis ◽  
Problem Formalization ◽  
Actuated Joints

Abstract Direct position analysis (DPA) of parallel manipulators (PMs) is in general difficult to solve. Over on PMs' topology, DPA complexity depends on the choice of the actuated joints. From an analytic point of view, the system of algebraic equations that one must solve to implement PMs' DPA is usually expressible in an apparently simple form, but such a form does not allow an analytic solution and even the problem formalization is relevant in PMs' DPAs. The ample literature on the DPA of Stewart platforms well document this point. This paper addresses the DPA of a particular translational PM of 3-URU type, which has the actuators on the frame while the actuated joints are not adjacent to the frame. The problem formulation brings to a closure-equation system consisting of three irrational equations in three unknowns. Such a system is transformed into an algebraic system of four quadratic equations in four unknowns that yields a univariate irrational equation in one of the four unknowns and three explicit expressions of the remaining three unknowns. Then, an algorithm is proposed which is able to find only the real solutions of the DPA. The proposed solution technique can be applied to other DPAs reducible to a similar system of irrational equations and, as far as this author is aware, is novel. Keywords: Kinematics, Position Analysis, Parallel Manipulators, Lower Mobility, Translational Manipulators

Kinematics of a 6-DOF parallel manipulator with two limbs actuated by spherical motion generators

2021 ◽  
pp. 095440622110329
Author(s):  
Kun Wang ◽  
Xiaoyong Wu ◽  
Yujin Wang ◽  
Jun Ding ◽  
Shaoping Bai
Keyword(s):  
Kinematic Analysis ◽  
Parallel Manipulator ◽  
Parallel Manipulators ◽  
Practical Application ◽  
Numerical Examples ◽  
Position Analysis ◽  
Kinematic Study ◽  
Small Footprint ◽  
Dual Arm ◽  
Spherical Motion

Inspired by dual-arm-like manipulation, a novel 6-DOF parallel manipulator with two spherical-universal-revolute limbs is proposed. Compared with general 6-DOF parallel manipulators with six limbs, this new manipulator actuated by spherical motion generators has only two limbs, which brings advantages such as fewer active limbs for avoiding interference, larger reachable and orientational workspace for complex operating, more actuators integrated in active modules for decreasing installation errors and increasing compactness. In this paper, the kinematics of this novel parallel manipulator is solved and illustrated, covering its inverse and forward position analysis, workspace and singularities. The kinematic study reveals interesting features of this manipulator such as multiple working and assembly modes, small footprint and large workspace volume with high dexterity. Numerical examples of kinematic analysis are included. Practical application of the new manipulator is illustrated.

Dexterous Workspace of n-PRRR Planar Parallel Manipulators

2012 ◽  
Vol 4 (3) ◽  
Author(s):  
André Gallant ◽  
Roger Boudreau ◽  
Marise Gallant
Keyword(s):  
Kinematic Chain ◽  
Parallel Manipulators ◽  
Divergence Theorem ◽  
End Effector ◽  
Kinematic Chains ◽  
Prismatic Joint ◽  
Planar Surfaces ◽  
Revolute Joints ◽  
Gauss Divergence Theorem ◽  
Planar Parallel Manipulators

In this work, a method is presented to geometrically determine the dexterous workspace boundary of kinematically redundant n-PRRR (n-PRRR indicates that the manipulator consists of n serial kinematic chains that connect the base to the end-effector. Each chain is composed of two actuated (therefore underlined) joints and two passive revolute joints. P indicates a prismatic joint while R indicates a revolute joint.) planar parallel manipulators. The dexterous workspace of each nonredundant RRR kinematic chain is first determined using a four-bar mechanism analogy. The effect of the prismatic actuator is then considered to yield the workspace of each PRRR kinematic chain. The intersection of the dexterous workspaces of all the kinematic chains is then obtained to determine the dexterous workspace of the planar n-PRRR manipulator. The Gauss divergence theorem applied to planar surfaces is implemented to compute the total dexterous workspace area. Finally, two examples are shown to demonstrate applications of the method.

scholarly journals Position and Singularity Analysis of a Class of Planar Parallel Manipulators with a Reconfigurable End-Effector

Machines ◽  
2021 ◽  
Vol 9 (1) ◽  
pp. 7
Author(s):  
Tommaso Marchi ◽  
Giovanni Mottola ◽  
Josep M. Porta ◽  
Federico Thomas ◽  
Marco Carricato
Keyword(s):  
Inverse Kinematics ◽  
Kinematic Chain ◽  
Experimental Tests ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Parallel Robots ◽  
End Effector ◽  
Revolute Joints ◽  
A Chain ◽  
And Control

Parallel robots with configurable platforms are a class of robots in which the end-effector has an inner mobility, so that its overall shape can be reconfigured: in most cases, the end-effector is thus a closed-loop kinematic chain composed of rigid links. These robots have a greater flexibility in their motion and control with respect to rigid-platform parallel architectures, but their kinematics is more challenging to analyze. In our work, we consider n-RRR planar configurable robots, in which the end-effector is a chain composed of n links and revolute joints, and is controlled by n rotary actuators located on the base of the mechanism. In particular, we study the geometrical design of such robots and their direct and inverse kinematics for n=4, n=5 and n=6; we employ the bilateration method, which can simplify the kinematic analysis and allows us to generalize the approach and the results obtained for the 3-RRR mechanism to n-RRR robots (with n>3). Then, we study the singularity configurations of these robot architectures. Finally, we present the results from experimental tests that have been performed on a 5–RRR robot prototype.

Type Synthesis of 3-DOF Translational Parallel Manipulators Based on Screw Theory

2004 ◽  
Vol 126 (1) ◽  
pp. 83-92 ◽  
Author(s):  
Xianwen Kong ◽  
Cle´ment M. Gosselin
Keyword(s):  
Screw Theory ◽  
General Procedure ◽  
Linear Equations ◽  
Kinematic Chain ◽  
Parallel Manipulators ◽  
Type Synthesis ◽  
Displacement Analysis ◽  
Kinematic Chains ◽  
Small Joint ◽  
Actuated Joints

A method is proposed for the type synthesis of 3-DOF (degree-of-freedom) translational parallel manipulators (TPMs) based on screw theory. The wrench systems of a translational parallel kinematic chain (TPKC) and its legs are first analyzed. A general procedure is then proposed for the type synthesis of TPMs. The type synthesis of legs for TPKCs, the type synthesis of TPKCs as well as the selection of actuated joints of TPMs are dealt with in sequence. An approach to derive the full-cycle mobility conditions for legs for TPKCs is proposed based on screw theory and the displacement analysis of serial kinematic chains undergoing small joint motions. In addition to the TPKCs proposed in the literature, TPKCs with inactive joints are synthesized. The phenomenon of dependent joint groups in a TPKC is revealed systematically. The validity condition of actuated joints of TPMs is also proposed. Finally, linear TPMs, which are TPMs whose forward displacement analysis can be performed by solving a set of linear equations, are also revealed.

Direct position analysis of parallel manipulators which generate SP-2PS structures

Robotica ◽  
2005 ◽  
Vol 23 (4) ◽  
pp. 521-526 ◽  
Author(s):  
Raffaele Di Gregorio
Keyword(s):  
Polynomial Equation ◽  
Analytic Form ◽  
Parallel Manipulators ◽  
Real Case ◽  
End Effector ◽  
Position Analysis ◽  
Parallel Structures ◽  
Univariate Polynomial

The determination of the assembly modes of the parallel structures with three legs of type PS or SP (P and S stand for prismatic pair and spherical pair, respectively) consists of solving the direct position analysis of all the three-legged parallel manipulators which have, in each leg, one not actuated prismatic pair, one not actuated spherical pair and one or two one-dof actuated pairs of any type, placed along the leg in any order. There are two types of such structures: (i) 3PS structures and (ii) SP-2PS structures. The procedure to determine the assembly modes of the SP-2PS structures has not been presented yet, in the literature. This paper presents the analytic form determination of the assembly modes of the SP-2PS structures. In particular, the closure equations of a generic SP-2PS structure will be written and their solution will be reduced to the solution of an eight-degree univariate polynomial equation with real coefficients. Finally, the proposed algorithm will be applied to a real case. The result of this study is that the assembly modes of any SP-2PS structure are at most eight, and the end-effector poses, which solve the direct position analysis of the parallel manipulators that generate those structures, are also eight.

Forward Position Analysis of Two 3-R Robots Manipulating a Planar Linkage Payload

1995 ◽  
Vol 117 (2A) ◽  
pp. 292-297 ◽  
Author(s):  
G. R. Pennock ◽  
K. G. Mattson
Keyword(s):  
Closed Loop ◽  
Degree Of Freedom ◽  
Sixth Order ◽  
Position Analysis ◽  
Revolute Joints ◽  
Order Polynomial ◽  
Cooperating Robots ◽  
Position Problem ◽  
Three Degree Of Freedom ◽  
Insight Into

This paper presents the forward position analysis of two planar three degree-of-freedom robots, with all revolute joints, manipulating a single degree-of-freedom closed-loop linkage payload. Kinematic constraint relations are developed which provide geometric insight into the cooperating robot-payload system and are important in the control of the two robots. For illustrative purposes, the payload that is considered here is a planar four-bar linkage. The paper shows that the orientation of a specified link in the payload can be described by a sixth-order polynomial. This polynomial is an important contribution, not only to the kinematics of the cooperating robots, but to the multiple-input closed-loop nine-bar linkage formed by the two robots and the payload. The polynomial contains important information regarding the assembly configurations and the stationary configurations of the system. The paper shows that zero, two, four, or six assembly configurations are possible and that each configuration corresponds to a different circuit of the system. Graphical methods are utilized to provide geometric insight into the assembly and stationary configurations and to check the results obtained from the sixth-order polynomial. A numerical example is included which demonstrates the importance of the polynomial in solving the forward position problem, and in determining the number of assembly configurations.

scholarly journals Pa<sup>2</sup> kinematic bond in translational parallel manipulators

2018 ◽  
Vol 9 (1) ◽  
pp. 25-39 ◽  
Author(s):  
Alfonso Hernández ◽  
Erik Macho ◽  
Mónica Urízar ◽  
Víctor Petuya ◽  
Zhen Zhang
Keyword(s):  
Inverse Kinematics ◽  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Kinematic Chain ◽  
Parallel Manipulators ◽  
The Other ◽  
Practical Application ◽  
Promising Alternative ◽  
Revolute Joints ◽  
Prismatic Joints

Abstract. The Pa2 pair is composed of two intertwined articulated parallelograms connecting in parallel two links of a kinematic chain. This pair has two translational degrees of freedom leading to a translational plane variable with the position. Currently, the Pa2 pair appears in conceptual designs presented in recent papers. However, its practical application is very limited. One of the reasons for this can be the high number of redundant constraints it has. But, it has to be considered that most of them can be eliminated by replacing wisely the revolute joints by spherical joints. On the other side, the structure of the Pa2 pair contributes to increase the global stiffness of the kinematic chain in which it is mounted. Also, its implementation is a promising alternative to the problematic passive prismatic joints. In this paper, the Pa2 pairs are used in the design of a 3 − P Pa2 parallel manipulator. The potentiality of this design is evaluated and proven after doing the following analyses: direct and inverse kinematics, singularity study, and workspace computation and assessment.

Sign in / Sign up

Export Citation Format

Share Document