Numerical Study of Laminar Forced Convection Fluid Flow and Heat Transfer From a Triangular Cylinder Placed in a Channel

2006 ◽  
Vol 129 (5) ◽  
pp. 646-656 ◽  
Author(s):  
Arnab Kumar De ◽  
Amaresh Dalal
Keyword(s):  
Heat Transfer ◽  
Numerical Study ◽  
Computational Study ◽  
Lift Coefficient ◽  
Stream Velocity ◽  
Blockage Ratio ◽  
Global Mode ◽  
Flow And Heat Transfer ◽  
Wake Instability ◽  
Laminar Forced Convection

Computational study of two-dimensional laminar flow and heat transfer past a triangular cylinder placed in a horizontal channel is presented for the range 80≤Re≤200 and blockage ratio 1/12≤β≤1/3. A second-order accurate finite volume code with nonstaggered arrangement of variables is developed employing momentum interpolation for the pressure-velocity coupling. Global mode of cross-stream velocity oscillations predict the first bifurcation point increases linearly with blockage ratio with no second bifurcation found in the range of Re studied. The Strouhal number and rms of lift coefficient increase significantly with blockage ratio and Reynolds number while overall Nusselt number remains almost unchanged for different blockage ratios. At lower blockage ratios, flow is found to be similar to the unconfined flow and is more prone to wake instability. Instantaneous streak lines provide an excellent means of visualizing the von Kármán vortex street.

scholarly journals Numerical Study on Flow and Heat Transfer Mechanisms in the Heat Exchanger Channel with V-Orifice at Various Blockage Ratios, Gap Spacing Ratios, and Flow Directions

2019 ◽  
Vol 2019 ◽  
pp. 1-21 ◽  
Author(s):  
Amnart Boonloi ◽  
Withada Jedsadaratanachai
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Numerical Study ◽  
Numerical Results ◽  
Blockage Ratio ◽  
Maximum Heat ◽  
Flow And Heat Transfer ◽  
Maximum Heat Transfer ◽  
Smooth Channel ◽  
Gap Spacing

Numerical assessments in the square channel heat exchanger installed with various parameters of V-orifices are presented. The V-orifice is installed in the heat exchanger channel with gap spacing between the upper-lower edges of the orifice and the channel wall. The purposes of the design are to reduce the pressure loss, increase the vortex strength, and increase the turbulent mixing of the flow. The influence of the blockage ratio and V-orifice arrangement is investigated. The blockage ratio, b/H, of the V-orifice is varied in the range 0.05–0.30. The V-tip of the V-orifice pointing downstream (V-downstream) is compared with the V-tip pointing upstream (V-upstream) by both flow and heat transfer. The numerical results are reported in terms of flow visualization and heat transfer pattern in the test section. The thermal performance assessments in terms of Nusselt number, friction factor, and thermal enhancement factor are also concluded. The numerical results reveal that the maximum heat transfer enhancement is found to be around 26.13 times higher than the smooth channel, while the optimum TEF is around 3.2. The suggested gap spacing for the present configuration of the V-orifice channel is around 5–10%.

The Effect of Blockage Ratio on Fluid Flow and Heat Transfer around a Confined Square Cylinder under the Effect Thermal Buoyancy

2018 ◽  
Vol 16 ◽  
pp. 1-11
Author(s):  
Houssem Laidoudi
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Numerical Study ◽  
Convection Heat Transfer ◽  
Blockage Ratio ◽  
Square Cylinder ◽  
Total Drag ◽  
Thermal Buoyancy ◽  
2D Simulation ◽  
Flow And Heat Transfer

2D simulation is carried out to determine exactly the effect of blockage ratio on the flow and mixed convection heat transfer characteristics of Newtonian fluid across a square cylinder confined in horizontal channel, the numerical study is investigated in the range of these conditions:Re= 10 to 30,Ri= 0 to 1 and blockage ratioβ= 1/10 to 1/2. The flow structure and temperature field are visualized in terms of streamlines and isotherm contours. The total drag coefficient and average Nusselt number are also reported to show the combined effects of thermal buoyancy, Reynolds number and blockage ratio on the hydrodynamic flow forces and heat transfer rate. The obtained results showed that the effect of thermal buoyancy on fluid flow and heat transfer becomes more pronounced by decreasing the blockage ratio.

A Parametric Numerical Study of Fluid Flow and Heat Transfer in a Computer Chassis

2015 ◽  
Vol 9 (3) ◽  
pp. 242 ◽  
Author(s):  
Efstathios Kaloudis ◽  
Dimitris Siachos ◽  
Konstantinos Stefanos Nikas
Keyword(s):  
Heat Transfer ◽  
Fluid Flow ◽  
Numerical Study ◽  
Flow And Heat Transfer

scholarly journals A Computational Study on the Role of Parameters for Identification of Thyroid Nodules by Infrared Images (and Comparison with Real Data)

Sensors ◽  
2021 ◽  
Vol 21 (13) ◽  
pp. 4459
Author(s):  
José R. González ◽  
Charbel Damião ◽  
Maira Moran ◽  
Cristina A. Pantaleão ◽  
Rubens A. Cruz ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Thyroid Nodules ◽  
Numerical Study ◽  
Computational Study ◽  
Internal Heat ◽  
Heat Transfer Process ◽  
The Body ◽  
Physical Parameters ◽  
Infrared Sensors ◽  
Wide Range

According to experts and medical literature, healthy thyroids and thyroids containing benign nodules tend to be less inflamed and less active than those with malignant nodules. It seems to be a consensus that malignant nodules have more blood veins and more blood circulation. This may be related to the maintenance of the nodule’s heat at a higher level compared with neighboring tissues. If the internal heat modifies the skin radiation, then it could be detected by infrared sensors. The goal of this work is the investigation of the factors that allow this detection, and the possible relation with any pattern referent to nodule malignancy. We aim to consider a wide range of factors, so a great number of numerical simulations of the heat transfer in the region under analysis, based on the Finite Element method, are performed to study the influence of each nodule and patient characteristics on the infrared sensor acquisition. To do so, the protocol for infrared thyroid examination used in our university’s hospital is simulated in the numerical study. This protocol presents two phases. In the first one, the body under observation is in steady state. In the second one, it is submitted to thermal stress (transient state). Both are simulated in order to verify if it is possible (by infrared sensors) to identify different behavior referent to malignant nodules. Moreover, when the simulation indicates possible important aspects, patients with and without similar characteristics are examined to confirm such influences. The results show that the tissues between skin and thyroid, as well as the nodule size, have an influence on superficial temperatures. Other thermal parameters of thyroid nodules show little influence on surface infrared emissions, for instance, those related to the vascularization of the nodule. All details of the physical parameters used in the simulations, characteristics of the real nodules and thermal examinations are publicly available, allowing these simulations to be compared with other types of heat transfer solutions and infrared examination protocols. Among the main contributions of this work, we highlight the simulation of the possible range of parameters, and definition of the simulation approach for mapping the used infrared protocol, promoting the investigation of a possible relation between the heat transfer process and the data obtained by infrared acquisitions.

Sign in / Sign up

Export Citation Format

Share Document