Particle Entrainment in a Bounded Rotating Flow With a Drain

1998 ◽  
Vol 120 (4) ◽  
pp. 676-679 ◽  
Author(s):  
J. Mang ◽  
E. Minkov ◽  
U. Schaflinger ◽  
M. Ungarish
Keyword(s):  
Analytical Solution ◽  
Finite Difference Method ◽  
Time Dependent ◽  
Rotating Flow ◽  
Centrifugal Separation ◽  
Ekman Layers ◽  
Dependent Flow ◽  
Bathtub Vortex ◽  
Oseen Vortex ◽  
Good Agreement

A bathtub vortex is usually formed at the axis of a drain. In the presence of such a vortex, gravity separation of solid impurities lighter than the embedding fluid is modified by centrifugal separation and viscous resuspension. Both mechanisms are responsible for the agglomeration of impurities at the axis of the vortex. From there the impurities are easily sucked into the outlet. In the investigated case, a viscous fluid with a given initial rotation is spinning down in a container with endplates both at the bottom and the top. The amount of fluid withdrawn through a circular hole in the center of the vortex is constantly replaced by a radial influx. The resulting time-dependent flow was solved by means of a finite difference method taking into account the influence of Ekman layers at the bottom and the top. Subsequently, the process of centrifugal separation of particles lighter than the embedding fluid was studied in the aforementioned flow field. The results were compared with the particle motion in a classical Oseen vortex. For a simplified case an analytical solution was derived and compared with the corresponding numerical solution. Both results were found to be in good agreement.

scholarly journals Solutions without Space-Time Separation for ADS Experiments: Overview on Developments and Applications

2012 ◽  
Vol 2012 ◽  
pp. 1-11 ◽  
Author(s):  
B. Merk ◽  
V. Glivici-Cotruţă
Keyword(s):  
Analytical Solution ◽  
Analytical Solutions ◽  
Space Time ◽  
Experimental Results ◽  
Time Dependent ◽  
Special Configuration ◽  
Time Separation ◽  
Function Solution ◽  
Boundary Source ◽  
Good Agreement

The different analytical solutions without space-time separation foreseen for the analysis of ADS experiments are described. The SC3A experiment in the YALINA-Booster facility is described and investigated. For this investigation the very special configuration of YALINA-Booster is analyzed based on HELIOS calculations. The results for the time dependent diffusion and the time dependentP1equation are compared with the experimental results for the SC3A configuration. A comparison is given for the deviation between the analytical solution and the experimental results versus the different transport approximations. To improve the representation to the special configuration of YALINA- Booster, a new analytical solution for two energy groups with two sources (central external and boundary source) has been developed starting form the Green's function solution. Very good agreement has been found for these improved analytical solutions.

scholarly journals Analytical Solution for One-Dimensional Nonlinear Consolidation of Saturated Double-Layered Soil Subjected to Cyclic Loadings

2021 ◽  
Vol 2021 ◽  
pp. 1-22
Author(s):  
Pyol Kim ◽  
Chol-U Pak ◽  
Hakbom Myong
Keyword(s):  
Cyclic Loading ◽  
Analytical Solution ◽  
Soft Soil ◽  
Layered Soil ◽  
Time Dependent ◽  
Saturated Soils ◽  
One Dimensional ◽  
Special Cases ◽  
Nonlinear Consolidation ◽  
Good Agreement

Cyclic loading-induced consolidation behavior of soft soil is of great interest for the analysis of offshore and onshore structures. In this study, an analytical solution for one-dimensional (1D) nonlinear consolidation of saturated double-layered soil under various types of cyclic loadings such as trapezoidal cyclic loading, rectangular cyclic loading, and triangular cyclic loading was derived. The proposed solution was subsequently degenerated into solutions for special cases and compared to the existing solutions. The degenerate solutions show good agreement with the existing results, which proves that the proposed solutions are more general ones for 1D nonlinear consolidation of saturated soils under time-dependent loading. Finally, a comprehensive parametric study was conducted to investigate the influences of different layer parameters, drainage conditions, and loading parameters on nonlinear consolidation of saturated double-layered soil under cyclic loadings.

scholarly journals Semi-Analytical Solution to Assess CO2 Leakage in the Subsurface through Abandoned Wells

Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2452
Author(s):  
Tian Qiao ◽  
Hussein Hoteit ◽  
Marwan Fahs
Keyword(s):  
Analytical Solution ◽  
Storage Site ◽  
Co2 Leakage ◽  
Transient Pressure ◽  
Flow Paths ◽  
Abandoned Wells ◽  
Diffusivity Equation ◽  
Carbon Dioxide Co2 ◽  
Good Agreement

Geological carbon storage is an effective method capable of reducing carbon dioxide (CO2) emissions at significant scales. Subsurface reservoirs with sealing caprocks can provide long-term containment for the injected fluid. Nevertheless, CO2 leakage is a major concern. The presence of abandoned wells penetrating the reservoir caprock may cause leakage flow-paths for CO2 to the overburden. Assessment of time-varying leaky wells is a need. In this paper, we propose a new semi-analytical approach based on pressure-transient analysis to model the behavior of CO2 leakage and corresponding pressure distribution within the storage site and the overburden. Current methods assume instantaneous leakage of CO2 occurring with injection, which is not realistic. In this work, we employ the superposition in time and space to solve the diffusivity equation in 2D radial flow to approximate the transient pressure in the reservoirs. Fluid and rock compressibilities are taken into consideration, which allow calculating the breakthrough time and the leakage rate of CO2 to the overburden accurately. We use numerical simulations to verify the proposed time-dependent semi-analytical solution. The results show good agreement in both pressure and leakage rates. Sensitivity analysis is then conducted to assess different CO2 leakage scenarios to the overburden. The developed semi-analytical solution provides a new simple and practical approach to assess the potential of CO2 leakage outside the storage site. This approach is an alternative to numerical methods when detailed simulations are not feasible. Furthermore, the proposed solution can also be used to verify numerical codes, which often exhibit numerical artifacts.

Flow Mixing Enhancement from Balloon Pulsations in an Intravenous Oxygenator

2004 ◽  
Vol 127 (3) ◽  
pp. 400-415 ◽  
Author(s):  
Amador M. Guzmán ◽  
Rodrigo A. Escobar ◽  
Cristina H. Amon
Keyword(s):  
Numerical Simulations ◽  
Oxygen Transfer ◽  
Fiber Bundle ◽  
Transfer Rate ◽  
Oxygen Transfer Rate ◽  
Three Dimensional ◽  
Time Dependent ◽  
Fiber Placement ◽  
Flow Mixing ◽  
Dependent Flow

Computational investigations of flow mixing and oxygen transfer characteristics in an intravenous membrane oxygenator (IMO) are performed by direct numerical simulations of the conservation of mass, momentum, and species equations. Three-dimensional computational models are developed to investigate flow-mixing and oxygen-transfer characteristics for stationary and pulsating balloons, using the spectral element method. For a stationary balloon, the effect of the fiber placement within the fiber bundle and the number of fiber rings is investigated. In a pulsating balloon, the flow mixing characteristics are determined and the oxygen transfer rate is evaluated. For a stationary balloon, numerical simulations show two well-defined flow patterns that depend on the region of the IMO device. Successive increases of the Reynolds number raise the longitudinal velocity without creating secondary flow. This characteristic is not affected by staggered or non-staggered fiber placement within the fiber bundle. For a pulsating balloon, the flow mixing is enhanced by generating a three-dimensional time-dependent flow characterized by oscillatory radial, pulsatile longitudinal, and both oscillatory and random tangential velocities. This three-dimensional flow increases the flow mixing due to an active time-dependent secondary flow, particularly around the fibers. Analytical models show the fiber bundle placement effect on the pressure gradient and flow pattern. The oxygen transport from the fiber surface to the mean flow is due to a dominant radial diffusion mechanism, for the stationary balloon. The oxygen transfer rate reaches an asymptotic behavior at relatively low Reynolds numbers. For a pulsating balloon, the time-dependent oxygen-concentration field resembles the oscillatory and wavy nature of the time-dependent flow. Sherwood number evaluations demonstrate that balloon pulsations enhance the oxygen transfer rate, even for smaller flow rates.

Numerical Simulation of Ship Collision and Validations With Experimental Results

2021 ◽  
Author(s):  
Xiangbiao Wang ◽  
Chun Bao Li ◽  
Ling Zhu
Keyword(s):  
Numerical Simulation ◽  
Model Test ◽  
Structural Damage ◽  
Added Mass ◽  
Ship Motion ◽  
Time Dependent ◽  
Structural Deformation ◽  
Structure Interaction ◽  
Ship Collision ◽  
Good Agreement

Abstract Ship collision accidents occur from time to time in recent years, and this would cause serious consequences such as casualties, environmental pollution, loss of cargo on board, damage to the ship and its equipment, etc. Therefore, it is of great significance to study the response of ship motion and the mechanism of structural damage during the collision. In this paper, model experiments and numerical simulation are used to study the ship-ship collision. Firstly, the Coupled Eulerian-Lagrangian (CEL) was used to simulate the fluid-structure interaction for predicting structural deformation and ship motion during the normal ship-ship collision. Meanwhile, a series of model tests were carried out to validate the numerical results. The validation presented that the CEL simulation was in good agreement with the model test. However, the CEL simulation could not present the characteristics the time-dependent added mass.

Sign in / Sign up

Export Citation Format

Share Document