Prediction of Unsteady Rotor-Surface Pressure and Heat Transfer From Wake Passings

1992 ◽  
Vol 114 (4) ◽  
pp. 807-817 ◽  
Author(s):  
L. T. Tran ◽  
D. B. Taulbee
Keyword(s):  
Heat Transfer ◽  
Experimental Data ◽  
Boundary Layer ◽  
Heat Flux ◽  
Unsteady Flow ◽  
Rotor Blade ◽  
Numerical Solutions ◽  
Inviscid Flow ◽  
Blade Surface ◽  
Blade Passage

The research described in this paper is a numerical investigation of the effects of unsteady flow on gas turbine heat transfer, particularly on a rotor blade surface. The unsteady flow in a rotor blade passage and the unsteady heat transfer on the blade surface as a result of wake/blade interaction are modeled by the inviscid flow/boundary layer approach. The Euler equations that govern the inviscid flow are solved using a time-accurate marching scheme. The unsteady flow in the blade passage is induced by periodically moving a wake model across the passage inlet. Unsteady flow solutions in the passage provide pressure gradients and boundary conditions for the boundary-layer equations that govern the viscous flow adjacent to the blade surface. Numerical solutions of the unsteady turbulent boundary layer yield surface heat flux values that can then be compared to experimental data. Comparisons with experimental data show that unsteady heat flux on the blade suction surface is well predicted, but the predictions of unsteady heat flux on the blade pressure surface do not agree.

Prediction of Unsteady Rotor-Surface Pressure and Heat Transfer From Wake Passings

1991 ◽  
Author(s):  
Le T. Tran ◽  
Dale B. Taulbee
Keyword(s):  
Heat Transfer ◽  
Experimental Data ◽  
Boundary Layer ◽  
Heat Flux ◽  
Unsteady Flow ◽  
Rotor Blade ◽  
Numerical Solutions ◽  
Inviscid Flow ◽  
Blade Surface ◽  
Blade Passage

The research described in this paper is a numerical investigation of the effects of unsteady flow on gas turbine heat transfer, particularly on a rotor blade surface. The unsteady flow in a rotor blade passage and the unsteady heat transfer on the blade surface as a result of wake/blade interaction are modeled by the inviscid flow/boundary layer approach. The Euler equations which govern the inviscid flow are solved using a time accurate marching scheme. The unsteady flow in the blade passage is induced by periodically moving a wake model across the passage inlet. Unsteady flow solutions in the passage provide pressure gradients and boundary conditions for the boundary-layer equations which govern the viscous flow adjacent to the blade surface. Numerical solutions of the unsteady turbulent boundary layer yield surface heat flux values which can then be compared to experimental data. Comparisons with experimental data show that unsteady heat flux on the blade suction surface is well predicted, but the predictions of unsteady heat flux on the blade pressure surface do not agree.

Conical Turbulent Boundary Layer Experiments and a Correlation With Flat Plate Data

1960 ◽  
Vol 82 (2) ◽  
pp. 94-100 ◽  
Author(s):  
W. S. Bradfield
Keyword(s):  
Heat Transfer ◽  
Experimental Data ◽  
Boundary Layer ◽  
Heat Flux ◽  
Turbulent Boundary Layer ◽  
Local Heat ◽  
Temperature Profiles ◽  
Turbulent Friction ◽  
Total Temperature ◽  
Local Heat Flux

Measurements in the turbulent boundary layer of unyawed cones for Mach numbers from 1 to 6 are presented. Specifically, the first measurements of total temperature profiles, directly determined skin friction, and local heat flux in the turbulent boundary layer of cone models are given. In addition, these experimental data are shown to justify the calculation of turbulent friction and heat transfer on unyawed cones by means of an incompressible plate friction law and simple auxiliary relations.

Oscillatory Heat Transfer in a Pipe Subjected to a Laminar Reciprocating Flow

1996 ◽  
Vol 118 (3) ◽  
pp. 592-597 ◽  
Author(s):  
T. S. Zhao ◽  
P. Cheng
Keyword(s):  
Heat Transfer ◽  
Experimental Data ◽  
Heat Flux ◽  
Nusselt Number ◽  
Numerical Study ◽  
Temperature Cycle ◽  
Uniform Heat Flux ◽  
Fluid Temperature ◽  
Cycle Space ◽  
Reciprocating Flow

An experimental and numerical study has been carried out for laminar forced convection in a long pipe heated by uniform heat flux and subjected to a reciprocating flow of air. Transient fluid temperature variations in the two mixing chambers connected to both ends of the heated section were measured. These measurements were used as the thermal boundary conditions for the numerical simulation of the hydrodynamically and thermally developing reciprocating flow in the heated pipe. The coupled governing equations for time-dependent convective heat transfer in the fluid flow and conduction in the wall of the heated tube were solved numerically. The numerical results for time-resolved centerline fuid temperature, cycle-averaged wall temperature, and the space-cycle averaged Nusselt number are shown to be in good agreement with the experimental data. Based on the experimental data, a correlation equation is obtained for the cycle-space averaged Nusselt number in terms of appropriate dimensionless parameters for a laminar reciprocating flow of air in a long pipe with constant heat flux.

Comparison of 3D Unsteady Transient Conjugate Heat Transfer Analysis on a High Pressure Cooled Turbine Stage With Experimental Data

2017 ◽  
Author(s):  
Jong-Shang Liu ◽  
Mark C. Morris ◽  
Malak F. Malak ◽  
Randall M. Mathison ◽  
Michael G. Dunn
Keyword(s):  
Heat Transfer ◽  
Experimental Data ◽  
Heat Flux ◽  
High Pressure ◽  
High Temperature ◽  
Gas Turbine ◽  
Conjugate Heat Transfer ◽  
Turbine Rotor ◽  
Turbine Stage ◽  
Cooling Flow

In order to have higher power to weight ratio and higher efficiency gas turbine engines, turbine inlet temperatures continue to rise. State-of-the-art turbine inlet temperatures now exceed the turbine rotor material capability. Accordingly, one of the best methods to protect turbine airfoil surfaces is to use film cooling on the airfoil external surfaces. In general, sizable amounts of expensive cooling flow delivered from the core compressor are used to cool the high temperature surfaces. That sizable cooling flow, on the order of 20% of the compressor core flow, adversely impacts the overall engine performance and hence the engine power density. With better understanding of the cooling flow and accurate prediction of the heat transfer distribution on airfoil surfaces, heat transfer designers can have a more efficient design to reduce the cooling flow needed for high temperature components and improve turbine efficiency. This in turn lowers the overall specific fuel consumption (SFC) for the engine. Accurate prediction of rotor metal temperature is also critical for calculations of cyclic thermal stress, oxidation, and component life. The utilization of three-dimensional computational fluid dynamics (3D CFD) codes for turbomachinery aerodynamic design and analysis is now a routine practice in the gas turbine industry. The accurate heat-transfer and metal-temperature prediction capability of any CFD code, however, remains challenging. This difficulty is primarily due to the complex flow environment of the high-pressure turbine, which features high speed rotating flow, coupling of internal and external unsteady flows, and film-cooled, heat transfer enhancement schemes. In this study, conjugate heat transfer (CHT) simulations are performed on a high-pressure cooled turbine stage, and the heat flux results at mid span are compared to experimental data obtained at The Ohio State University Gas Turbine Laboratory (OSUGTL). Due to the large difference in time scales between fluid and solid, the fluid domain is simulated as steady state while the solid domain is simulated as transient in CHT simulation. This paper compares the unsteady and transient results of the heat flux on a high-pressure cooled turbine rotor with measurements obtained at OSUGTL.

scholarly journals Measurement of Unsteady Flow and Heat Transfer in a Linear Turbine Cascade

1992 ◽  
Author(s):  
X. Liu ◽  
W. Rodi
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Unsteady Flow ◽  
Boundary Layers ◽  
Suction Side ◽  
Turbine Cascade ◽  
Transfer Coefficients ◽  
Flow And Heat Transfer ◽  
Background Turbulence ◽  
Hot Film

A detailed experimental study has been conducted on the wake-induced unsteady flow and heat transfer in a linear turbine cascade. The unsteady wakes with passing frequencies in the range zero to 240 Hz were generated by moving cylinders on a squirrel cage device. The velocity fields in the blade-to-blade flow and in the boundary layers were measured with hot-wire anemometers, the surface pressures with a pressure transducer and the heat transfer coefficients with a glue-on hot film. The results were obtained in ensemble-averaged form so that periodic unsteady processes can be studied. Of particular interest was the transition of the boundary layer. The boundary layer remained laminar on the pressure side in all cases and in the case without wakes also on the suction side. On the latter, the wakes generated by the moving cylinders caused transition, and the beginning of transition moves forward as the cylinder-passing frequency increases. Unlike in the flat-plate study of Liu and Rodi (1991a) the instantaneous boundary layer state does not respond to the passing wakes and therefore does not vary with time. The heat transfer increases under increasing cylinder-passing frequency even in the regions with laminar boundary layers due to the increased background turbulence.

Experimental Study of Heat Transfer to Supercritical Pressure Water Flowing in a 2×2 Rod Bundle

2014 ◽  
Author(s):  
Han Wang ◽  
Qincheng Bi ◽  
Linchuan Wang ◽  
Haicai Lv ◽  
Laurence K. H. Leung
Keyword(s):  
Heat Transfer ◽  
Experimental Data ◽  
Heat Flux ◽  
Pressure Drop ◽  
Wall Temperature ◽  
Mass Flux ◽  
Heat Fluxes ◽  
Outer Diameter ◽  
Square Channel ◽  
Rod Bundle

An experiment has recently been performed at Xi’an Jiaotong University to study the wall temperature and pressure drop at supercritical pressures with upward flow of water inside a 2×2 rod bundle. A fuel-assembly simulator with four heated rods was installed inside a square channel with rounded corner. The outer diameter of each heated rod is 8 mm with an effective heated length of 600 mm. Experimental parameters covered the pressure of 23–28 MPa, mass flux of 350–1000 kg/m2s and heat flux on the rod surface of 200–1000 kW/m2. According to the experimental data, it was found that the circumferential wall temperature distribution of a heated rod is not uniform. The temperature difference between the maximum and the minimum varies with heat flux and/or mass flux. Heat transfer characteristics of supercritical water in bundle were discussed with respect to various heat fluxes. The effect of heat flux on heat transfer in rod bundles is similar with that in tubes or annuli. In addition, flow resistance reflected in the form of pressure loss has also been studied. Experimental results showed that the total pressure drop increases with bulk enthalpy and mass flux. Four heat transfer correlations developed for supercritical pressures water were compared with the present test data. Predictions of Jackson correlation agrees closely with the experimental data.

Jet-to-Plate Distance Effect on Heat Transfer From a Flat Plate to an Impinging Jet at Various Reynolds Numbers

2012 ◽  
Author(s):  
Patricia Streufert ◽  
Terry X. Yan ◽  
Mahdi G. Baygloo
Keyword(s):  
Heat Transfer ◽  
Experimental Data ◽  
Reynolds Number ◽  
Flat Plate ◽  
Numerical Solutions ◽  
Stokes Equations ◽  
Local Heat Transfer ◽  
Reynolds Numbers ◽  
Air Jet ◽  
Plate Distance

Local turbulent convective heat transfer from a flat plate to a circular impinging air jet is numerically investigated. The jet-to-plate distance (L/D) effect on local heat transfer is the main focus of this study. The eddy viscosity V2F turbulence model is used with a nonuniform structured mesh. Reynolds-Averaged Navier-Stokes equations (RANS) and the energy equation are solved for axisymmetric, three-dimensional flow. The numerical solutions obtained are compared with published experimental data. Four jet-to-plate distances, (L/D = 2, 4, 6 and 10) and seven Reynolds numbers (Re = 7,000, 15,000, 23,000, 50,000, 70,000, 100,000 and 120,000) were parametrically studied. Local and average heat transfer results are analyzed and correlated with Reynolds number and the jet-to-plate distance. Results show that the numerical solutions matched experimental data best at low jet-to-plate distances and lower Reynolds numbers, decreasing in ability to accurately predict the heat transfer as jet-to-plate distance and Reynolds number was increased.

scholarly journals Prediction of Unshrouded Rotor Blade Tip Heat Transfer

1995 ◽  
Author(s):  
A. A. Ameri ◽  
E. Steinthorsson
Keyword(s):  
Heat Transfer ◽  
Rotor Blade ◽  
Stokes Equations ◽  
Space Shuttle ◽  
Suction Side ◽  
Computer Code ◽  
Turbine Rotor ◽  
High Rate ◽  
Blade Surface ◽  
Blade Tip

The rate of heat transfer on the tip of a turbine rotor blade and on the blade surface in the vicinity of the tip, was successfully predicted. The computations were performed with a multiblock computer code which solves the Reynolds Averaged Navier-Stokes equations using an efficient multigrid method. The case considered for the present calculations was the SSME (Space Shuttle Main Engine) high pressure fuel side turbine. The predictions of the blade tip heat transfer agreed reasonably well with the experimental measurements using the present level of grid refinement. On the tip surface, regions with high rate of heat transfer was found to exist close to the pressure side and suction side edges. Enhancement of the heat transfer was also observed on the blade surface near the tip. Further comparison of the predictions was performed with results obtained from correlations based on fully developed channel flow.

Simple Model of Boiling Heat Transfer on Tubes in Large Pools

1997 ◽  
Vol 119 (2) ◽  
pp. 376-379 ◽  
Author(s):  
Y. Parlatan ◽  
U. S. Rohatgi
Keyword(s):  
Heat Transfer ◽  
Experimental Data ◽  
Heat Flux ◽  
Heat Exchanger ◽  
Atmospheric Pressure ◽  
Boiling Heat Transfer ◽  
Saturation Temperature ◽  
Flow Dynamics ◽  
Simple Method ◽  
Vertical Tubes

A simple method has been developed to model boiling heat transfer from a heat exchanger to pools using the experimental data available in the literature without modeling the flow dynamics of the pool. In this approach the heat flux outside vertical tubes is expressed as a function of outside wall temperature of the tubes and saturation temperature of the pool at or near atmospheric pressure.

Sign in / Sign up

Export Citation Format

Share Document