On the Critical Speeds of a Continuous Rotor

1969 ◽  
Vol 91 (4) ◽  
pp. 1180-1188 ◽  
Author(s):  
R. L. Eshleman ◽  
R. A. Eubanks
Keyword(s):  
Partial Differential Equations ◽  
Differential Equations ◽  
Boundary Conditions ◽  
Transverse Shear ◽  
Critical Speed ◽  
Equations Of Motion ◽  
Analytical Investigation ◽  
Relative Importance ◽  
Rotatory Inertia ◽  
Critical Speeds

An analytical investigation was made on the effect of axial torque on the critical speeds of a continuous rotor whose motion was described by a set of partial differential equations including the effects of transverse shear, rotatory inertia, and gyroscopic moments. The equations of motion and associated boundary conditions for long and short bearings were cast in nondimensional form to facilitate the study of the influence of the aforementioned effects on a torque-transmitting rotor’s critical speeds. The results of this study were compared to classical results of Bernoulli-Enter and Timoshenko to determine the relative importance of the rotor’s “secondary phenomena” in a critical speed calculation.

The creeping motion of a non-Newtonian fluid past a sphere

1962 ◽  
Vol 13 (3) ◽  
pp. 417-426 ◽  
Author(s):  
B. Caswell ◽  
W. H. Schwarz
Keyword(s):  
Reynolds Number ◽  
Flow Stress ◽  
Partial Differential Equations ◽  
Differential Equations ◽  
Boundary Conditions ◽  
Equations Of Motion ◽  
Slow Flow ◽  
Linear Partial Differential Equations ◽  
Creeping Motion ◽  
Flow Past A Sphere

The equations of motion and continuity are solved together with the slow-flow stress equations for an incompressible Rivlin-Ericksen fluid. The boundary conditions for slow flow past a sphere are satisfied by matching inner (Stokes) and outer (Oseen) Reynolds-number expansions of the stream function. The terms in the inner expansion are the solutions of non-linear partial differential equations which are solved approximately by expanding in terms of a non-Newtonian parameter λ. The drag force on the sphere is obtained from the solution.

Lyapunov-type inequalities for partial differential equations with 𝑝-Laplacian

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Robert Stegliński
Keyword(s):  
Partial Differential Equations ◽  
Differential Equations ◽  
Boundary Conditions ◽  
Dirichlet Boundary ◽  
Nonlinear Partial Differential Equations ◽  
Dirichlet Boundary Conditions ◽  
Partial Differential ◽  
Linear Partial Differential Equations ◽  
Lyapunov Inequalities ◽  
Funct Anal

Abstract The aim of this paper is to extend results from [A. Cañada, J. A. Montero and S. Villegas, Lyapunov inequalities for partial differential equations, J. Funct. Anal. 237 (2006), 1, 176–193] about Lyapunov-type inequalities for linear partial differential equations to nonlinear partial differential equations with 𝑝-Laplacian with zero Neumann or Dirichlet boundary conditions.

scholarly journals On the theory and practice of thin-walled structures

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Tamaz Vashakmadze
Keyword(s):  
Partial Differential Equations ◽  
Differential Equations ◽  
Boundary Conditions ◽  
Complex Analysis ◽  
Theory And Practice ◽  
Linear Case ◽  
Wide Sense ◽  
Partial Differential ◽  
Thin Walled Structures ◽  
Thin Walled

Abstract The basic problem of satisfaction of boundary conditions is considered when the generalized stress vector is given on the surfaces of elastic plates and shells. This problem has so far remained open for both refined theories in a wide sense and hierarchic type models. In the linear case, it was formulated by I. N. Vekua for hierarchic models. In the nonlinear case, bending and compression-expansion processes do not split and in this context the exact structure is presented for the system of differential equations of von Kármán–Mindlin–Reisner (KMR) type, constructed without using a variety of ad hoc assumptions since one of the two relations of this system in the classical form is the compatibility condition, but not the equilibrium equation. In this paper, a unity mathematical theory is elaborated in both linear and nonlinear cases for anisotropic inhomogeneous elastic thin-walled structures. The theory approximately satisfies the corresponding system of partial differential equations and the boundary conditions on the surfaces of such structures. The problem is investigated and solved for hierarchic models too. The obtained results broaden the sphere of applications of complex analysis methods. The classical theory of finding a general solution of partial differential equations of complex analysis, which in the linear case was thoroughly developed in the works of Goursat, Weyl, Walsh, Bergman, Kolosov, Muskhelishvili, Bers, Vekua and others, is extended to the solution of basic nonlinear differential equations containing the nonlinear summand, which is a composition of Laplace and Monge–Ampére operators.

Disk Position Nonlinearity Effects on the Chaotic Behavior of Rotating Flexible Shaft-Disk Systems

2012 ◽  
Vol 28 (3) ◽  
pp. 513-522 ◽  
Author(s):  
H. M. Khanlo ◽  
M. Ghayour ◽  
S. Ziaei-Rad
Keyword(s):  
Partial Differential Equations ◽  
Differential Equations ◽  
Dynamic Behavior ◽  
Chaotic Behavior ◽  
Equations Of Motion ◽  
Beam Theory ◽  
Disk System ◽  
Partial Differential ◽  
Rayleigh Beam ◽  
Flexible Shaft

AbstractThis study investigates the effects of disk position nonlinearities on the nonlinear dynamic behavior of a rotating flexible shaft-disk system. Displacement of the disk on the shaft causes certain nonlinear terms which appears in the equations of motion, which can in turn affect the dynamic behavior of the system. The system is modeled as a continuous shaft with a rigid disk in different locations. Also, the disk gyroscopic moment is considered. The partial differential equations of motion are extracted under the Rayleigh beam theory. The assumed modes method is used to discretize partial differential equations and the resulting equations are solved via numerical methods. The analytical methods used in this work are inclusive of time series, phase plane portrait, power spectrum, Poincaré map, bifurcation diagrams, and Lyapunov exponents. The effect of disk nonlinearities is studied for some disk positions. The results confirm that when the disk is located at mid-span of the shaft, only the regular motion (period one) is observed. However, periodic, sub-harmonic, quasi-periodic, and chaotic states can be observed for situations in which the disk is located at places other than the middle of the shaft. The results show nonlinear effects are negligible in some cases.

Beam Vibrations With Time-Dependent Boundary Conditions

1950 ◽  
Vol 17 (4) ◽  
pp. 377-380
Author(s):  
R. D. Mindlin ◽  
L. E. Goodman
Keyword(s):  
Partial Differential Equations ◽  
Differential Equations ◽  
Boundary Conditions ◽  
Boundary Value Problems ◽  
Separation Of Variables ◽  
Boundary Value ◽  
Time Dependent ◽  
Partial Differential ◽  
Linear Partial Differential Equations ◽  
Vibration Problems

Abstract A procedure is described for extending the method of separation of variables to the solution of beam-vibration problems with time-dependent boundary conditions. The procedure is applicable to a wide variety of time-dependent boundary-value problems in systems governed by linear partial differential equations.

Large-Amplitude Oscillations of Unsymmetrically Laminated Anisotropic Rectangular Plates Including Shear, Rotatory Inertia, and Transverse Normal Stress

1985 ◽  
Vol 52 (3) ◽  
pp. 536-542 ◽  
Author(s):  
K. S. Sivakumaran ◽  
C. Y. Chia
Keyword(s):  
Boundary Conditions ◽  
Normal Stress ◽  
Transverse Shear ◽  
Plate Theory ◽  
Orientation Angle ◽  
Nonlinear Frequency ◽  
Rectangular Plates ◽  
Elastic Plates ◽  
Rotatory Inertia ◽  
Transverse Normal Stress

This paper is concerned with nonlinear free vibrations of generally laminated anisotropic elastic plates. Based on Reissner’s variational principle a nonlinear plate theory is developed. The effects of transverse shear, rotatory inertia, transverse normal stress, and transverse normal contraction or extension are included in this theory. Using the Galerkin procedure and principle of harmonic balance, approximate solutions to governing equations of unsymmetrically laminated rectangular plates including transverse shear, rotatory inertia, and transverse normal stress are formulated for various boundary conditions. Numerical results for the ratio of nonlinear frequency to linear frequency of unsymmetric angle-ply and cross-ply laminates are presented graphically for various values of elastic properties, fiber orientation angle, number of layers, and aspect ratio and for different boundary conditions. Present results are also compared with available data.

Sign in / Sign up

Export Citation Format

Share Document