A Novel Electromagnetic Fixture for Incremental Sheet Metal Forming

2019 ◽  
Vol 141 (3) ◽  
Author(s):  
Harish K. Nirala ◽  
Anupam Agrawal
Keyword(s):  
Single Point ◽  
Vital Role ◽  
Sheet Forming ◽  
Incremental Sheet Forming ◽  
Experimental Investigations ◽  
Slow Process ◽  
Incremental Sheet Metal Forming ◽  
Set Up ◽  
Localized Plastic Deformation ◽  
Process Speed

Single-point incremental sheet forming (SPISF) is a promising die-less forming technique. It has a variety of applications in many industries, viz., automobile, aerospace, and bone transplants. In SPISF, a sheet of metal is deformed by using numerically controlled single-point, hemispherical end-shaped forming tool, which incrementally deforms the sheet with highly localized plastic deformation. SPISF is a flexible yet relatively slow process when compared with conventional forming techniques like deep drawing and spinning. Since the beginning of die-less forming technology, researchers are recommending it for small batch production system or for customized fabrication. Being a slow process, it still has not achieved wide industrial acceptability. Among several key parameters dictating the process speed, the sheet clamping mechanism is one of the significant parameters of SPISF. Clamping mechanism plays a vital role in its manufacturing lead time. However, research efforts in this direction have been largely neglected. In this investigation, to improve the process speed, a novel electromagnetic clamping mechanism for SPISF is proposed. Detailed numerical and experimental investigations have been carried out to set up its applicability for the SPISF process. From the available literature, it has been found that this type of clamping mechanism in SPISF has not been studied or investigated. The proposed electromagnetic clamping makes the process of sheet clamping faster and convenient, and provides one-click clamping solution. This concept can take the process of incremental sheet forming toward better industrial acceptability. Furthermore, SPISF of symmetric and asymmetric components is conducted to test the feasibility of the concept.

Experimental Investigations and Numerical Analysis for Improving Knowledge of Incremental Sheet Forming Process for Sheet Metal Parts

2009 ◽  
Vol 623 ◽  
pp. 37-48 ◽  
Author(s):  
Steeve Dejardin ◽  
Jean Claude Gelin ◽  
Sebastien Thibaud
Keyword(s):  
Sheet Metal ◽  
Incremental Forming ◽  
Single Point ◽  
Sheet Forming ◽  
Incremental Sheet Forming ◽  
Experimental Investigations ◽  
Metal Parts ◽  
Sheet Metal Parts ◽  
Forming Strategy ◽  
Set Up

The paper is related to the analysis of shape distortions and springback effects arising in Single Point Incremental Forming. An experimental set up has been designed and manufactured to carry single point incremental forming on small size sheet metal parts. The experimental set up is mounted on 3-axes CNC milling machine tool and the forming tool is attached and move with the spindle. Experiments have been carried out on sheet metal parts to obtain tronconical shapes. The forming strategy associated to the movement of the forming tool has been also investigated. The experiments indicate that shape distortions arising in the corners of the tronconical shape are clearly related to forming strategy. The springback of rings cut in the tronconical parts have been also investigated. It is shown that positive or negative springback could be also related to forming strategy. In order to enhance experimental investigations, Finite Element simulations of the incremental sheet forming have been performed. Results obtained from the simulations prove that if boundary conditions and forming strategy carefully are taking into account, the finite elements results are in good agreement with experiments. So it is then possible to use FEM as a design tool for incremental sheet forming.

Multiobjective optimization of process variables in single-point incremental forming using grey relational analysis coupled with entropy weights

2021 ◽  
pp. 146442072110204
Author(s):  
Abdulmajeed Dabwan ◽  
Adham E Ragab ◽  
Mohamed A Saleh ◽  
Atef M Ghaleb ◽  
Mohamed Z Ramadan ◽  
...  
Keyword(s):  
Grey Relational Analysis ◽  
Incremental Forming ◽  
Single Point ◽  
Sheet Forming ◽  
Incremental Sheet Forming ◽  
Numerical Control ◽  
Single Point Incremental Forming ◽  
Process Variables ◽  
Relational Analysis ◽  
Grey Relational

Incremental sheet forming is a specific group of sheet forming methods that enable the manufacture of complex parts utilizing computer numerical control instead of specialized tools. It is an incredibly adaptable operation that involves minimal usage of sophisticated tools, dies, and forming presses. Besides its main application in the field of rapid prototyping, incremental sheet forming processes can be used for the manufacture of unique parts in small batches. The goal of this study is to broaden the knowledge of the deformation process in single-point incremental forming. This work studies the deformation behavior in single-point incremental forming by experimentally investigating the principal stresses, principal strains, and thinning of single-point incremental forming products. Conical-shaped components are fabricated using AA1050-H14 aluminum alloy at various combinations of fundamental variables. The factorial design is employed to plan the experimental study and analysis of variance is conducted to analyze the results. The grey relational analysis approach coupled with entropy weights is also implemented to identify optimum process variables for single-point incremental forming. The results show that the tool diameter has the greatest effect on the thinning of the SPIF product, followed by the sheet thickness, step size, and feed rate.

Parameter optimization and texture evolution in single point incremental sheet forming process

2019 ◽  
Vol 234 (1-2) ◽  
pp. 126-139 ◽  
Author(s):  
Shamik Basak ◽  
K Sajun Prasad ◽  
Amarjeet Mehto ◽  
Joy Bagchi ◽  
Y Shiva Ganesh ◽  
...  
Keyword(s):  
Surface Roughness ◽  
Process Parameters ◽  
Regression Models ◽  
Incremental Forming ◽  
Single Point ◽  
Sheet Forming ◽  
Incremental Sheet Forming ◽  
Single Point Incremental Forming ◽  
Input Process ◽  
Truncated Cone

Prototyping through incremental sheet forming is emerging as a latest trend in the manufacturing industries for fabricating personalized components according to customer requirement. In this study, a laboratory scale single-point incremental forming test setup was designed and fabricated to deform AA6061 sheet metal plastically. In addition, response surface methodology with Box–Behnken design technique was used to establish different regression models correlating input process parameters with mechanical responses such as angle of failure, part depth per unit time and surface roughness. Correspondingly, the regression models were implemented to optimize the input process parameters, and the predicted responses were successfully validated at the optimal conditions. It was observed that the predicted absolute error for angle of failure, part depth per unit time and surface roughness responses was approximately 0.9%, 4.4% and 6.3%, respectively, for the optimum parametric combination. Furthermore, the post-deformation responses from an optimized single point incremental forming truncated cone were correlated with microstructural evolution. It was observed that the peak hardness and highest areal surface roughness of 158 ± 9 HV and 1.943 μm, respectively, were found near to the pole of single-point incremental forming truncated cone, and the highest major plastic strain at this region was 0.80. During incremental forming, a significant increase in microhardness occurred due to grain refinement, whereas a substantial increase in the Brass and S texture component was responsible for the increase in the surface roughness.

scholarly journals Cranial Reconstruction Using Double Side Incremental Forming

2015 ◽  
Vol 639 ◽  
pp. 535-542 ◽  
Author(s):  
Bin Lu ◽  
Dong Kai Xu ◽  
Run Zhe Liu ◽  
Heng An Ou ◽  
Hui Long ◽  
...  
Keyword(s):  
Tool Path ◽  
Incremental Forming ◽  
Thickness Distribution ◽  
Single Point ◽  
Pure Titanium ◽  
Sheet Forming ◽  
Incremental Sheet Forming ◽  
Geometric Accuracy ◽  
Backing Plate ◽  
Cranial Implant

Incremental sheet forming (ISF) is a highly versatile and flexible process for rapid manufacturing of complex sheet metal parts. Comparing to conventional sheet forming processes, ISF is of a clear advantage in manufacturing small batch or customized products such as cranial implant. Although effort on cranial reconstruction by using incremental sheet forming approach has been made in recent years, research has been mostly based on the single point incremental forming (SPIF) strategy and there are still considerable technical challenges for achieving better geometric accuracy, thickness distribution and complex cranial shape. In addition, the use of a backing plate or supporting die reduces the process flexibility and increases the cost. To overcome these limitations, double side incremental sheet forming (DSIF) process is employed for forming Grade 1 pure titanium sheet by using different toolpath strategies. The geometric accuracy and thickness distribution of the final part are evaluated so the optimized tool path strategies are developed. This leads to an assessment of the DSIF based approach for the application in cranial reconstruction.

Brass 70/30 and Incremental Sheet Forming Process

2013 ◽  
Vol 554-557 ◽  
pp. 1419-1431 ◽  
Author(s):  
Daniel Fritzen ◽  
Anderson Daleffe ◽  
Jovani Castelan ◽  
Lirio Schaeffer
Keyword(s):  
Incremental Forming ◽  
Single Point ◽  
Sheet Forming ◽  
Incremental Sheet Forming ◽  
Cnc Machining ◽  
Forming Process ◽  
Wall Angle ◽  
Machining Center ◽  
Cad Cam ◽  
Cnc Machining Center

This work addresses through bibliographies and experiments the behavior of sheet brass 70/30 for Incremental Sheet Forming process - ISF, based on the parameters: wall angle (), step vertical (ΔZ) strategy and the way the tool. Experiments based on the method called Single Point Incremental Forming - SPIF. For execution of practical tests, we used the resources: software CAD / CAM, CNC machining center with three axles, matrix incremental, incremental forming tool and a device press sheets. Furthermore, measurement was made of the true deformation () and thickness (s1). Practical tests have shown that the spiral machining strategy yielded a greater wall angle, compared to the conventional strategy outline.

scholarly journals A Novel Tool to Enhance The Lubricant Efficiency On Induction Heat-Assisted Incremental Sheet Forming of Ti-6Al-4V Sheets

2022 ◽  
Author(s):  
Weining Li ◽  
Khamis Essa ◽  
Sheng Li
Keyword(s):  
Surface Quality ◽  
Single Point ◽  
Water Channel ◽  
Sheet Forming ◽  
Incremental Sheet Forming ◽  
Water Cooling ◽  
Geometric Accuracy ◽  
Molybdenum Disulphide ◽  
Roughness Analysis ◽  
Pass Through

Abstract For heat-assisted single point incremental sheet forming (SPIF) works of Ti-6Al-4V sheets, the use of lubricant has shown significant effects on surface quality and geometric accuracy at higher temperatures. Molybdenum disulphide (MoS2) is a common lubricant widely used in SPIF works, however, it usually indicates ineffective performance at high temperatures. This article has studied different lubricants of MoS2 lubricants and proposed a novel mixture of MoS2 to provide better surface quality and improve geometric accuracy. A forming tool with a ball-roller and water channel was designed to enable the MoS2 mixture to pass through the tool tip, allowing easy application of the lubricant on the localised area and reduce the thermal expansion on the ball-roller. Surface roughness analysis has revealed that the water-cooling MoS2 mixture performed well in reducing friction effects and achieved better geometric accuracy. Forming forces measurements, scanning electron microscope (SEM), energy dispersive X-ray Analysis (EDX) and micro-hardness tests also indicated that a higher strain hardening behaviour was detected for the water-cooling MoS2 mixture.

Sign in / Sign up

Export Citation Format

Share Document