Definition and Interpretation of Wind Farm Efficiency in Complex Terrain: A Discussion

2019 ◽  
Vol 141 (5) ◽  
Author(s):  
Davide Astolfi ◽  
Francesco Castellani ◽  
Ludovico Terzi
Keyword(s):  
Wind Turbines ◽  
Complex Terrain ◽  
Wind Farm ◽  
Wind Farms ◽  
Offshore Wind ◽  
Test Case ◽  
Wind Flow ◽  
Farm Efficiency ◽  
Definition Of ◽  
The Impact

The exploitation of wind turbines in complex terrain has recently been growing. The comprehension of wind flow, especially in the downstream area, is by itself a challenging task in complex terrain: even more so, it is difficult to account for the mixing between terrain effects and the wake interactions between nearby turbines. Efficiency is one of the simplest and meaningful metrics for quantifying the impact of wakes on wind farm production, but its definition is well established basically only for offshore wind farms. In this work, the definition of wind farm efficiency is, therefore, discussed, based on the critical points arising in complex terrain, where there can be at the same time a considerable variation of free wind flow along the layout and a directional distortion of the wakes, induced by the terrain. In this work, operational data of a test case wind farm sited in a very complex terrain, featuring 17 multimegawatt wind turbines, are elaborated and inspire a discussion and a novel definition of efficiency, that restores in the complex terrain case the meaning of the efficiency.

Wind Flow Conditions in Offshore Wind Farms: Validation and Application of a CFD Wake Model

Green ◽  
2013 ◽  
Vol 3 (1) ◽  
Author(s):  
Annette Westerhellweg ◽  
Beatriz Cañadillas ◽  
Friederike Kinder ◽  
Thomas Neumann
Keyword(s):  
Wind Farm ◽  
Atmospheric Stability ◽  
Wind Farms ◽  
Offshore Wind ◽  
Wind Flow ◽  
Flow Conditions ◽  
Offshore Wind Farms ◽  
Speed Reduction ◽  
Wake Model ◽  
The Impact

AbstractSince August 2009, the first German offshore wind farm ‘alpha ventus’ is operating close to the wind measurement platform FINO1. Within the research project RAVE-OWEA the wind flow conditions in ‘alpha ventus’ were assessed in detail, simulated with a CFD wake model and compared with the measurements. Wind data measured at FINO1 have been evaluated for wind speed reduction and turbulence increase in the wake. Additionally operational data were evaluated for the farm efficiency. The atmospheric stability has been evaluated by temperature measurements of air and water and the impact of atmospheric stability on the wind conditions in the wake has been assessed. As an application of CFD models the generation of power matrices is introduced. Power matrices can be used for the continual monitoring of the single wind turbines in the wind farm. A power matrix based on CFD simulations has been created for ‘alpha ventus’ and tested against the measured data.

scholarly journals On the Robustness of Active Wake Control to Wind Turbine Downtime

Energies ◽  
2019 ◽  
Vol 12 (16) ◽  
pp. 3152
Author(s):  
Stoyan Kanev
Keyword(s):  
Wind Turbines ◽  
Wind Farm ◽  
Wind Farms ◽  
Power Production ◽  
Offshore Wind ◽  
Negative Effects ◽  
Collaborative Control ◽  
Potential Benefits ◽  
Production Increase ◽  
The Impact

Active wake control (AWC) is an operational strategy for wind farms that aims at reducing the negative effects of wakes behind wind turbines on the power production and mechanical loads at the wind turbines’ downstream. For a given wind direction, the strategy relies on collaborative control of the machines within each row of turbines that affect each other through their wakes. The vast amount of research performed during the last decade indicates that the potential upside of this technology on the annual energy production of a wind farm can be as high as a few percentage points. Although these predictions on the potential benefits are quite significant, they typically assume full availability of all turbines within a row operating under AWC. However, even though the availability of offshore wind turbines is nowadays quite high (as high as 95%, or even higher), the availability of a whole row of turbines is shown to be much lower (lower than 60% for a row of ten turbines). This paper studies the impact of turbine downtime on the power production increase from AWC, and concludes that the AWC is robust enough to be kept operational in the presence of turbines standing still.

scholarly journals Simplified Formulae for the Estimation of Offshore Wind Turbines Clutter on Marine Radars

2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
Olatz Grande ◽  
Josune Cañizo ◽  
Itziar Angulo ◽  
David Jenn ◽  
Laith R. Danoon ◽  
...  
Keyword(s):  
Wind Turbines ◽  
Wind Farm ◽  
Impact Analysis ◽  
System Modeling ◽  
Wind Farms ◽  
Software Tools ◽  
Offshore Wind ◽  
Offshore Wind Farms ◽  
Modeling Software ◽  
The Impact

The potential impact that offshore wind farms may cause on nearby marine radars should be considered before the wind farm is installed. Strong radar echoes from the turbines may degrade radars’ detection capability in the area around the wind farm. Although conventional computational methods provide accurate results of scattering by wind turbines, they are not directly implementable in software tools that can be used to conduct the impact studies. This paper proposes a simple model to assess the clutter that wind turbines may generate on marine radars. This method can be easily implemented in the system modeling software tools for the impact analysis of a wind farm in a real scenario.

An ecosystem approach for studying the impact of offshore wind farms: a French case study

2018 ◽  
Vol 77 (3) ◽  
pp. 1238-1246 ◽  
Author(s):  
Jean-Philippe Pezy ◽  
Aurore Raoux ◽  
Jean-Claude Dauvin
Keyword(s):  
Network Analysis ◽  
Wind Farm ◽  
Wind Farms ◽  
Sampling Strategy ◽  
Ecosystem Approach ◽  
Offshore Wind ◽  
Ecosystem Structure ◽  
Offshore Wind Farms ◽  
Ecopath Model ◽  
The Impact

Abstract The French government is planning the construction of offshore wind farms (OWF) in the next decade (around 2900 MW). Following the European Environmental Impact Assessment Directive 85/337/EEC, several studies have been undertaken to identify the environmental conditions and ecosystem functioning at selected sites prior to OWF construction. However, these studies are generally focused on the conservation of some species and there is no holistic approach for analysing the effects arising from OWF construction and operation. The objective of this article is to promote a sampling strategy to collect data on the different ecosystem compartments of the future Dieppe-Le Tréport (DLT) wind farm site, adopting an ecosystem approach, which could be applied to other OWFs for the implementation of a trophic network analysis. For that purpose, an Ecopath model is used here to derive indices from Ecological Network Analysis (ENA) to investigate the ecosystem structure and functioning. The results show that the ecosystem is most likely detritus-based, associated with a biomass dominated by bivalves, which could act as a dead end for a classic trophic food web since their consumption by top predators is low in comparison to their biomass. The systemic approach developed for DLT OWF site should be applied for other French and European installations of Offshore Wind Farm.

Seismic Design for Offshore Wind Farms – Lessons Learnt From the ACE Joint Industry Project

2021 ◽  
Author(s):  
Marcus Klose ◽  
Junkan Wang ◽  
Albert Ku
Keyword(s):  
Seismic Design ◽  
Wind Turbines ◽  
Wind Farms ◽  
The United States ◽  
Offshore Wind ◽  
Seismic Load ◽  
Support Structures ◽  
Offshore Wind Farms ◽  
Asian Pacific Region ◽  
The Impact

Abstract In the past, most of the offshore wind farms have been installed in European countries. In contrast to offshore wind projects in European waters, it became clear that the impact from earthquakes is expected to be one of the major design drivers for the wind turbines and their support structures in other areas of the world. This topic is of high importance in offshore markets in the Asian Pacific region like China, Taiwan, Japan, Korea as well as parts of the United States. So far, seismic design for wind turbines is not described in large details in existing wind energy standards while local as well as international offshore oil & gas standards do not consider the specifics of modern wind turbines. In 2019, DNV GL started a Joint Industry Project (JIP) called “ACE -Alleviating Cyclone and Earthquake challenges for wind farms”. Based on the project results, a Recommended Practice (RP) for seismic design of wind turbines and their support structures will be developed. It will supplement existing standards like DNVGL-ST-0126, DNVGL-ST-0437 and the IEC 61400 series. This paper addresses the area of seismic load calculation and the details of combining earthquake impact with other environmental loads. Different options of analysis, particularly time-domain simulations with integrated models or submodelling techniques using superelements will be presented. Seismic ground motions using a uniform profile or depth-varying input profile are discussed. Finally, the seismic load design return period is addressed.

scholarly journals Floating Performance of a Composite Bucket Foundation with an Offshore Wind Tower during Transportation

Energies ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 882 ◽  
Author(s):  
Hongyan Ding ◽  
Zuntao Feng ◽  
Puyang Zhang ◽  
Conghuan Le ◽  
Yaohua Guo
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Farm ◽  
Wind Farms ◽  
Interaction Force ◽  
Offshore Wind ◽  
Construction Technique ◽  
Bucket Foundation ◽  
Offshore Wind Turbines ◽  
One Step

The composite bucket foundation (CBF) for offshore wind turbines is the basis for a one-step integrated transportation and installation technique, which can be adapted to the construction and development needs of offshore wind farms due to its special structural form. To transport and install bucket foundations together with the upper portion of offshore wind turbines, a non-self-propelled integrated transportation and installation vessel was designed. In this paper, as the first stage of applying the proposed one-step integrated construction technique, the floating behavior during the transportation of CBF with a wind turbine tower for the Xiangshui wind farm in the Jiangsu province was monitored. The influences of speed, wave height, and wind on the floating behavior of the structure were studied. The results show that the roll and pitch angles remain close to level during the process of lifting and towing the wind turbine structure. In addition, the safety of the aircushion structure of the CBF was verified by analyzing the measurement results for the interaction force and the depth of the liquid within the bucket. The results of the three-DOF (degree of freedom) acceleration monitoring on the top of the test tower indicate that the wind turbine could meet the specified acceleration value limits during towing.

scholarly journals Improved Control Strategy of MMC–HVDC to Improve Frequency Support of AC System

2020 ◽  
Vol 10 (20) ◽  
pp. 7282
Author(s):  
Zicong Zhang ◽  
Junghun Lee ◽  
Gilsoo Jang
Keyword(s):  
Wind Turbines ◽  
Wind Farm ◽  
Control Method ◽  
Short Circuit ◽  
Synchronous Generator ◽  
Frequency Stability ◽  
Offshore Wind ◽  
Inertial Response ◽  
Control Evaluation ◽  
The Impact

With the continuous development of power electronics technology, variable-speed offshore wind turbines that penetrated the grid system caused the problem of inertia reduction. This study investigates the frequency stability of synchronous, offshore wind-farm integration through a modular-multilevel-converter high-voltage direct-current (MMC–HVDC) transmission system. When full-scale converter wind turbines (type 4) penetrate the AC grid, the AC system debilitates, and it becomes difficult to maintain the AC system frequency stability. In this paper, we present an improved inertial-response-control method to solve this problem. The mathematical model of the synchronous generator is based on the swing equation and is theoretically derived by establishing a MMC–HVDC. Based on the above model, the inertia constant is analyzed using a model that integrates the MMC–HVDC and offshore synchronous generator. With the new improved control method, a more sensitive and accurate inertia index can be obtained using the formula related to the effective short-circuit ratio of the AC system. Moreover, it is advantageous to provide a more accurate inertial control evaluation for AC systems under various conditions. Furthermore, the impact of the MMC–HVDC on system safety is assessed based on the capacitor time constant. This simulation was implemented using the PSCAD/EMTDC platform.

Floating Offshore Wind Turbines: Responses in a Seastate Pareto Optimal Designs and Economic Assessment

2008 ◽  
Author(s):  
Paul Sclavounos ◽  
Christopher Tracy ◽  
Sungho Lee
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Farm ◽  
Wind Farms ◽  
Economic Assessment ◽  
Offshore Wind ◽  
Pareto Optimal ◽  
Mooring System ◽  
Floating Structure ◽  
Water Depths

Wind is the fastest growing renewable energy source, increasing at an annual rate of 25% with a worldwide installed capacity of 74 GW in 2007. The vast majority of wind power is generated from onshore wind farms. Their growth is however limited by the lack of inexpensive land near major population centers and the visual pollution caused by large wind turbines. Wind energy generated from offshore wind farms is the next frontier. Large sea areas with stronger and steadier winds are available for wind farm development and 5MW wind turbine towers located 20 miles from the coastline are invisible. Current offshore wind turbines are supported by monopoles driven into the seafloor at coastal sites a few miles from shore and in water depths of 10–15m. The primary impediment to their growth is visual pollution and the prohibitive cost of seafloor mounted monopoles in larger water depths. This paper presents a fully coupled dynamic analysis of floating wind turbines that enables a parametric design study of floating wind turbine concepts and mooring systems. Pareto optimal designs are presented that possess a favorable combination of nacelle acceleration, mooring system tension and displacement of the floating structure supporting a five megawatt wind turbine. All concepts are selected so that they float stably while in tow to the offshore wind farm site and prior to their connection to the mooring system. A fully coupled dynamic analysis is carried out of the wind turbine, floater and mooring system in wind and a sea state based on standard computer programs used by the offshore and wind industries. The results of the parametric study are designs that show Pareto fronts for mean square acceleration of the turbine versus key cost drivers for the offshore structure that include the weight of the floating structure and the static plus dynamic mooring line tension. Pareto optimal structures are generally either a narrow deep drafted spar, or a shallow drafted barge ballasted with concrete. The mooring systems include both tension leg and catenary mooring systems. In some of the designs, the RMS acceleration of the wind turbine nacelle can be as low as 0.03 g in a sea state with a significant wave height of ten meters and water depths of up to 200 meters. These structures meet design requirements while possessing a favorable combination of nacelle accleration, total mooring system tension and weight of the floating structure. Their economic assessment is also discussed drawing upon a recent financial analysis of a proposed offshore wind farm.

scholarly journals A Study of the Impact of Pitch Misalignment on Wind Turbine Performance

Machines ◽  
2019 ◽  
Vol 7 (1) ◽  
pp. 8 ◽  
Author(s):  
Davide Astolfi
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Power Output ◽  
Wind Farm ◽  
Reactive Power ◽  
Power Production ◽  
Test Case ◽  
Before And After ◽  
Input Variables ◽  
The Impact

Pitch angle control is the most common means of adjusting the torque of wind turbines. The verification of its correct function and the optimization of its control are therefore very important for improving the efficiency of wind kinetic energy conversion. On these grounds, this work is devoted to studying the impact of pitch misalignment on wind turbine power production. A test case wind farm sited onshore, featuring five multi-megawatt wind turbines, was studied. On one wind turbine on the farm, a maximum pitch imbalance between the blades of 4.5 ° was detected; therefore, there was an intervention for recalibration. Operational data were available for assessing production improvement after the intervention. Due to the non-stationary conditions to which wind turbines are subjected, this is generally a non-trivial problem. In this work, a general method was formulated for studying this kind of problem: it is based on the study, before and after the upgrade, of the residuals between the measured power output and a reliable model of the power output itself. A careful formulation of the model is therefore crucial: in this work, an automatic feature selection algorithm based on stepwise multivariate regression was adopted, and it allows identification of the most meaningful input variables for a multivariate linear model whose target is the power of the wind turbine whose pitch has been recalibrated. This method can be useful, in general, for the study of wind turbine power upgrades, which have been recently spreading in the wind energy industry, and for the monitoring of wind turbine performances. For the test case of interest, the power of the recalibrated wind turbine is modeled as a linear function of the active and reactive power of the nearby wind turbines, and it is estimated that, after the intervention, the pitch recalibration provided a 5.5% improvement in the power production below rated power. Wind turbine practitioners, in general, should pay considerable attention to the pitch imbalance, because it increases loads and affects the residue lifetime; in particular, the results of this study indicate that severe pitch misalignment can heavily impact power production.

Design Analysis of Critical Concepts Influence Wind Farm Production and Efficiency

2018 ◽  
Vol 40 ◽  
pp. 136-150
Author(s):  
Naima Charhouni ◽  
Mohammed Sallaou ◽  
Khalifa Mansouri
Keyword(s):  
Wind Turbines ◽  
Wind Farm ◽  
Production Efficiency ◽  
Wind Farms ◽  
Power Production ◽  
Separation Distance ◽  
Design Analysis ◽  
Offshore Wind ◽  
Farm Production ◽  
Wind Farm Design

Wind farm deficiency caused by wake turbine interactions has received an important attention by scientific researchers in recent years. However the quality of power production is strongly depends on wind turbines location from others. In this regard, this paper proposes a comprehensive design analysis of crucial concepts that aid to plan for an efficient wind farm design. Indeed, the wake modeling problem is addressed in this analysis by comparing three models with available measured data gotten from literature. A configuration of wind turbines placement within the offshore wind farm as a function of separation distance is investigated in this study considering four wind farms layout. In addition to these elements, four rotor diameters size are evaluated as critical concept for wind turbine selection and production .The results obtained demonstrate that it is complicated to make a balance between three conflicted objectives related to the power production, efficiency and surface land area required for wind farm as a function of these crucial concepts.

Sign in / Sign up

Export Citation Format

Share Document