Well Clean-Up Using a Combined Thermochemical/Chelating Agent Fluids

2019 ◽  
Vol 141 (10) ◽  
Author(s):  
Mohamed Mahmoud
Keyword(s):  
High Temperature ◽  
Filter Cake ◽  
Oil And Gas ◽  
Drilling Fluid ◽  
Chelating Agent ◽  
Drilling Fluids ◽  
Gas Wells ◽  
Oil And Gas Wells ◽  
Different Types ◽  
Cake Removal

The well clean-up process involves the removal of impermeable filter cake from the formation face. This process is essential to allow the formation fluids to flow from the reservoir to the wellbore. Different types of drilling fluids such as oil- and water-based drilling fluids are used to drill oil and gas wells. These drilling fluids are weighted with different weighting materials such as bentonite, calcium carbonate, and barite. The filter cake that forms on the formation face consists mainly of the drilling fluid weighting materials (around 90%), and the rest is other additives such as polymers or oil in the case of oil-base drilling fluids. The process of filter cake removal is very complicated because it involves more than one stage due to the compatibility issues of the fluids used to remove the filter cake. Different formulations were used to remove different types of filter cake, but the problem with these methods is the removal efficiency or the compatibility. In this paper, a new method was developed to remove different types of filter cakes and to clean-up oil and gas wells after drilling operations. Thermochemical fluids that consist of two inert salts when mixed together will generate very high pressure and high temperature in addition to hot water and hot nitrogen. These fluids are sodium nitrate and ammonium chloride. The filter cake was formed using barite and calcite water- and oil-based drilling fluids at high pressure and high temperature. The removal process started by injecting 500 ml of the two salts and left for different time periods from 6 to 24 h. The results of this study showed that the newly developed method of thermochemical removed the filter cake after 6 h with a removal efficiency of 89 wt% for the barite filter cake in the water-based drilling fluid. The mechanisms of removal using the combined solution of thermochemical fluid and ethylenediamine tetra-acetic acid (EDTA) chelating agent were explained by the generation of a strong pressure pulse that disturbed the filter cake and the generation of the high temperature that enhanced the barite dissolution and polymer degradation. This solution for filter cake removal works for reservoir temperatures greater than 100 °C.

scholarly journals Potential use of basidiomycota Trametes hirsuta MT-17.24 in biodegradation of polyanionic cellulose

2021 ◽  
Vol 11 (3) ◽  
pp. 472-480
Author(s):  
A. V. Zubchenko ◽  
E. Yu. Kozhevnikova ◽  
A. V. Barkov ◽  
Yu. A. Topolyuk ◽  
A. V. Shnyreva ◽  
...  
Keyword(s):  
Enzyme Preparation ◽  
Oil And Gas ◽  
Drilling Fluid ◽  
Schizophyllum Commune ◽  
Cellulase Activity ◽  
Drilling Fluids ◽  
Gas Wells ◽  
Trametes Hirsuta ◽  
Enzyme Preparations ◽  
Oil And Gas Wells

Abstract: Despite their efficiency, existing methods to dispose of drilling fluids used in the construction of oil and gas wells (chemical treatment of spent solutions, thermal method, thickening) are often expensive and unsustainable. Basidiomycota are natural xylotroph destructors that process lignocellulosic substrate – one of the most stable biopolymers in nature. Prospects for using enzyme preparations based on Basidiomycota as biodestructors of organic substances are evident due to the high efficiency and zero-waste production. The aim was to obtain an enzyme preparation based on the Trametes hirsute MT-17.24 Basidiomycota strain and evaluate its ability to biodegrade polyanionic cellulose, used as a viscosifier for drilling fluids in the construction and repair of oil and gas wells. Screening of cellulase activity of the following strains was carried out: Fomitopsis pinicola MT-5.21, Fomes fomentarius MT-4.05, Lactarius necator, Schizophyllum commune MT-33.01, Trametes versicolor It-1, Trametes hirsute MT-17.24, Trametes hirsuta MT-24.24. To obtain the enzyme preparation, the T. hirsuta MT-17.24 strain was selected, which demonstrated the highest coefficient of cellulase activity (10.9). A medium for solid-phase cultivation of this strain was selected. Enzymatic activity of the enzyme preparation was studied on a model drilling fluid. A 10-hour experiment showed that the use of a 1% enzyme preparation leads to a decrease in the plastic viscosity of the drilling fluid from 16 to 8 mPa·s. The research results demonstrate the efficiency of enzyme preparations based on Basidiomycota in the biodestruction of polyanionic cellulose.

scholarly journals Investigation of Non-Linear Rheological Characteristics of Barite-Free Drilling Fluids

Fluids ◽  
2021 ◽  
Vol 6 (9) ◽  
pp. 327
Author(s):  
Ekaterina Leusheva ◽  
Nataliia Brovkina ◽  
Valentin Morenov
Keyword(s):  
Oil And Gas ◽  
Drilling Fluid ◽  
Rheological Parameters ◽  
Drilling Fluids ◽  
Drilling Mud ◽  
Gas Wells ◽  
Oil And Gas Wells ◽  
Fluid Properties ◽  
Hydrolyzed Polyacrylamide ◽  
Drilling Muds

Drilling fluids play an important role in the construction of oil and gas wells. Furthermore, drilling of oil and gas wells at offshore fields is an even more complex task that requires application of specialized drilling muds, which are non-Newtonian and complex fluids. With regard to fluid properties, it is necessary to manage the equivalent circulation density because its high values can lead to fracture in the formation, loss of circulation and wellbore instability. Thus, rheology of the used drilling mud has a significant impact on the equivalent circulation density. The aim of the present research is to develop compositions of drilling muds with a low solids load based on salts of formate acid and improve their rheological parameters for wells with a narrow drilling fluid density range. Partially hydrolyzed polyacrylamide of different molecular weights was proposed as a replacement for hydrolized polyacrylamide. The experiment was conducted on a Fann rotary viscometer. The article presents experimentally obtained data of indicators such as plastic viscosity, yield point, nonlinearity index and consistency coefficient. Experimental data were analyzed by the method of approximation. Analysis is performed in order to determine the most suitable rheological model, which describes the investigated fluids’ flow with the least error.

Experiments on Fluid Placement in a Confined Pipe: Fluid Mechanics Analysis for Plug and Abandonment Applications

2020 ◽  
Author(s):  
Soheil Akbari ◽  
Seyed Mohammad Taghavi
Keyword(s):  
Oil And Gas ◽  
Drilling Fluid ◽  
Heavy Fluid ◽  
Cement Slurry ◽  
Gas Wells ◽  
Inflow Velocity ◽  
Operation Conditions ◽  
Oil And Gas Wells ◽  
Cement Plug

Abstract Plug and abandonment (P&A) of oil and gas wells is an essential process to prevent the oil and gas reservoir fluids migration over time and possibly contaminating other formations and also fresh water resources. In order to plug and abandon a well, a high quality cement plug placement is required. One of the most common methods of cement plug placement is the dump bailing method. In this method, a fixed volume of cement is dumped using a bailer on a mechanical plug in the wellbore. The cement slurry occupies the wellbore and also the annular region outside the dump bailer. In the processes of cement slurry placement, an extensive range of Newtonian or non-Newtonian fluids is used to remove the in-situ fluid (drilling fluid or water) in the wellbore. Based on the large number of parameters such as the density and viscosity differences between the fluids, the geometry type (pipe, annulus, etc.), the operation conditions (velocity, geometry inclination, dumping height), various kinds of placement and mixing flows can occur, and different flow regimes (e.g. inertial, viscous) can develop. In this paper, we experimentally study the placement of a heavy fluid to replace an in-situ light fluid in an inclined closed-end pipe (representative of the dump bailing method). The two fluids are Newtonian and miscible, and they have the same viscosity. We investigate the effects of some of the flow parameters such as the dumping height, the pipe inclination, and the inflow velocity of the heavy fluid on the degree of mixing and the placement quality and efficiency. Our results show that the the most efficient displacement happens with the shortest dumping height and at lower inclination from vertical. Also, a high inflow velocity displaces the light fluid promptly with more mixing in comparison with a low inflow rate. The results can help us to develop strategies for improving the dump bailing method in the P&A of the oil and gas wells.

Application of modified starch in high-temperature-resistant colloidal gas aphron (CGA) drilling fluids

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Wenxi Zhu ◽  
Xiuhua Zheng
Keyword(s):  
High Temperature ◽  
High Temperatures ◽  
High Performance ◽  
Oil And Gas ◽  
Elevated Temperatures ◽  
Drilling Fluid ◽  
Drilling Fluids ◽  
Modified Starch ◽  
Gas Reservoirs ◽  
Building Capability

Abstract Colloidal gas aphrons (CGA) are finding increasing application in depleted oil and gas reservoirs because of their distinctive characteristics. To overcome the limitations of its application in high-temperature drilling, a modified starch foams stabilizer WST with a temperature resistance of 160 °C was synthesized via radical polymerization. The chemical structure of WST was characterized by Fourier infrared spectroscopy and results showed that all three monomers acrylamide, 2-acrylamido-2-methyl-1-propane sulfonic acid, and N-vinylpyrrolidone have been grafted onto starch efficiently. Based on the microscopic observations, highly stable aphrons have been successfully generated in the WST-based CGA drilling fluids within 160 °C, and most aphrons lie in the range of 10–150 μm. WST can provide higher viscosity at high temperatures compared to xanthan gum, which helps to extend foam life and stability by enhancing the film strength and slowing down the gravity drainage. Results show that WST-CGA aged at elevated temperatures (120–160 °C) is a high-performance drilling fluid with excellent shear-thinning behavior, cutting carrying capacity, and filtration control ability. The significant improvement of filtration control and well-building capability at high temperatures is an important advantage of WST-CGA, which can be attributed to the enhancement of mud cake quality by WST.

scholarly journals The application of MWCNT to enhance the rheological behavior of drilling fluids at high temperature

2017 ◽  
Vol 12 (3) ◽  
Author(s):  
Abdul Razak Ismail ◽  
W. R. W Sulaiman ◽  
M. Z. Jaafar ◽  
A. Aftab ◽  
A. A. Razi ◽  
...  
Keyword(s):  
High Temperature ◽  
Rheological Properties ◽  
Rheological Behavior ◽  
Oil And Gas ◽  
Drilling Fluid ◽  
Gel Strength ◽  
Drilling Fluids ◽  
Deep Wells ◽  
Multi Walled Carbon Nanotube ◽  
Filtrate Loss

Drilling fluid is the key component to drill oil and gas wells. The rheological behavior of drilling fluid will be affected when drilling deep wells especially at high temperature and high pressure reservoir. This research was conducted to study the effect of the nanoparticles over the rheological properties of the drilling fluid when aging at high temperature condition. Several drilling fluids were prepared using synthetic based fluids (Sarapar and Saraline) to study the effect of multi-walled carbon nanotube (MWCNT) at different concentrations. The rheological properties of drilling fluid were analyzed after aging at 250 °F and 350 °F for 16 hours. The results revealed that the addition of MWCNT improved the 10-sec gel strength by 33% and filtrate loss volume was reduced to 10% after aging at 250°F in Saraline drilling fluid. Moreover, the plastic viscosity of Saraline and Sarapar drilling fluid after addition of MWCNT was enhanced by 6% and 27% at 350 °F. Filtrate loss volume of Sarapar drilling fluid was reduced by 19 % after aging at 250 °F for 16 hours. The overall results showed that the addition of MWCNT into the drilling fluid have slightly improved the rheological properties of drilling fluids under high temperature conditions.

Sign in / Sign up

Export Citation Format

Share Document