Configuration Design of Dual-input Compound Power-split Mechanism for In-Wheel Motor Driven Electrical Vehicles Based on An Improved Lever Analogy Method
Abstract High power density in-wheel motor could be achieved by integrating a high speed ratio (larger than 25) compound power-split mechanism (CPSM) with small motors. However, due to the exhaustive searching method adopted by the traditional lever analogy method, it is time-consuming to design high speed ratio compound power-split mechanism configurations satisfying high power density of in-wheel motor. In this paper an improved lever analogy method is proposed to find the optimal configurations with high speed ratio to satisfy the high power density in-wheel motor. In this method, a judgment algorithm about the rank of structure matrix is proposed to identify 3-node compound lever models of the CPSM. The improved lever analogy method can filter out useless configurations which significantly improve the calculation efficiency. The simulation results show that the calculation efficiency is improved by 215 times higher than that of the lever analogy method. Finally, 16 reasonable and 14 new configurations are obtained. This indicates that the improved lever analogy method can provide an effective way to design the high speed ratio CPSM which is widely used in-wheel motor driven vehicles.