Comparative Study of Vaneless and Vaned Diffusers in a Transonic Centrifugal Compressor With Real Gas

2000 ◽  
Author(s):  
Michael M. Cui
Keyword(s):  
Flow Field ◽  
Centrifugal Compressor ◽  
Three Dimensional ◽  
Power Laws ◽  
Navier Stokes ◽  
Local Flow ◽  
Design And Optimization ◽  
Transonic Centrifugal Compressor ◽  
Overall Performance ◽  
The Impact

Vaneless and vaned diffusers in a transonic centrifugal compressor with the refrigerant HFC-134a were studied experimentally and numerically. The compressor was tested on a closed-loop stand instrumented to obtain both overall performance data and local flow field quantities. In numerical studies, the thermodynamic and transport properties of the refrigerant gas were modeled by the Martin-Hou equation of state and power laws, respectively. To include the interaction of the compressor components in these analyses, a unified three-dimensional numerical model was built for the complete compressor stage. The flow field was calculated with a Navier-Stokes solver using the k-ε turbulent model. The impact of the different diffusers on both local flow field and overall performance is analyzed comparatively for each component. The experimental and numerical results agree well. The correlation between the overall compressor performance and local flow field quantities is defined. The methodology developed and data obtained in these studies can be applied to centrifugal compressor design and optimization.

scholarly journals Comparative Study of Unsteady Flows in a Transonic Centrifugal Compressor With Vaneless and Vaned Diffusers

2001 ◽  
Author(s):  
Michael M. Cui
Keyword(s):  
Flow Field ◽  
Unsteady Flow ◽  
Centrifugal Compressor ◽  
Three Dimensional ◽  
Power Laws ◽  
Working Fluid ◽  
Local Flow ◽  
Transonic Centrifugal Compressor ◽  
Compressor Performance ◽  
Overall Performance

To reduce vibration and noise level, the impeller and diffuser blade numbers inside an industrial compressor are typically chosen without common divisors. The shapes of volutes or collectors in these compressors are also not axis-symmetric. When impeller blades pass these asymmetric structures, the flow field in the compressor is time-dependent and three-dimensional. To obtain a fundamental physical understanding of these three-dimensional unsteady flow fields and assess their impact on the compressor performance, the flow field inside the compressors needs to be studied as a whole to include asymmetric and unsteady interaction between the compressor components. In current study, a unified three-dimensional numerical model was built for a transonic centrifugal compressor including impeller, diffusers, and volute. HFC 134a was used as the working fluid. The thermodynamic and transport properties of the refrigerant gas were modeled by the Martin-Hou equation of state and power laws, respectively. The three-dimensional unsteady flow field was simulated with a Navier-Stokes solver using the k-ε turbulent model. The overall performance parameters are obtained by integrating the field quantities. Both unsteady flow field and overall performance are analyzed comparatively for each component. The compressor was tested in a water chiller system instrumented to obtain both overall performance data and local flow field quantities. The experimental and numerical results agree well. The correlation between the overall compressor performance and local flow field quantities is defined. The methodology developed and data obtained in these studies can be applied to centrifugal compressor design and optimization.

scholarly journals Comparative Study of Unsteady Flows in a Transonic Centrifugal Compressor with Vaneless and Vaned Diffusers

2005 ◽  
Vol 2005 (1) ◽  
pp. 90-103 ◽  
Author(s):  
Michael M. Cui
Keyword(s):  
Flow Field ◽  
Unsteady Flow ◽  
Centrifugal Compressor ◽  
Three Dimensional ◽  
Power Laws ◽  
Working Fluid ◽  
Local Flow ◽  
Transonic Centrifugal Compressor ◽  
Compressor Performance ◽  
Overall Performance

To reduce vibration and noise level, the impeller and diffuser blade numbers inside an industrial compressor are typically chosen without common divisors. The shapes of volutes or collectors in these compressors are also not axis-symmetric. When impeller blades pass these asymmetric structures, the flow field in the compressor is time-dependent and three-dimensional. To obtain a fundamental physical understanding of these three-dimensional unsteady flow fields and assess their impact on the compressor performance, the flow field inside the compressors needs to be studied as a whole to include asymmetric and unsteady interaction between the compressor components. In the current study, a unified three-dimensional numerical model was built for a transonic centrifugal compressor including impeller, diffusers, and volute. HFC 134a was used as the working fluid. The thermodynamic and transport properties of the refrigerant gas were modeled by the Martin-Hou equation of state and power laws, respectively. The three-dimensional unsteady flow field was simulated with a Navier-Stokes solver using thek−εturbulent model. The overall performance parameters are obtained by integrating the field quantities. Both the unsteady flow field and the overall performance are analyzed comparatively for each component. The compressor was tested in a water chiller system instrumented to obtain both the overall performance data and local flow-field quantities. The experimental and numerical results agree well. The correlation between the overall compressor performance and local flow-field quantities is defined. The methodology developed and data obtained in these studies can be applied to the centrifugal compressor design and optimization.

Effect of Suction Elbow and Inlet Guide Vanes on Flow Field in a Centrifugal Compressor Stage

2002 ◽  
Author(s):  
Michael M. Cui
Keyword(s):  
Flow Field ◽  
Centrifugal Compressor ◽  
Three Dimensional ◽  
Power Laws ◽  
Working Fluid ◽  
Guide Vanes ◽  
Design And Optimization ◽  
Inlet Guide Vanes ◽  
Compressor Design ◽  
Overall Performance

Suction elbows and inlet guide vanes (IGVs) are typical upstream components in front of first-stage impellers in centrifugal compressors. The three-dimensional distortion induced by elbows and IGVs affects the flow field behind the IGV housing. Since the flow field in front of the impeller is subsonic, the flow motion induced by the rotating impeller will interact with the elbow and IGVs as well. The flow field resulting from these interactions is three-dimensional. The nature of this flow field defines design requirements of upstream components and impact overall performance of the compressor. To understand the mechanism controlling the interactions of up-steam components and optimize the compressor design for better efficiency and reliability, a numerical simulation of the flow field inside the entire first stage of the compressor was conducted. The stage studied includes suction elbow, IGV housing with vanes, and first-stage impeller. HFC 134a was used as the working fluid. The thermodynamic and transport properties of the refrigerant gas were modeled by the Martin-Hou equation of state and power laws respectively. The three-dimensional flow field was simulated with a Navier-Stokes solver using the k-ε turbulence model. The overall performance parameters are obtained by integrating the field quantities. The force, torque, and arm of moment acting on the IGVs were then calculated. The results can be used to improve centrifugal compressor design to achieve higher efficiency and improve reliability. The methodology developed in the current study can be applied to centrifugal compressor design and optimization.

scholarly journals THE IMPACT OF VARIOUS MODELLING DECISIONS ON FLOW FIELD PREDICTIONS IN A CENTRIFUGAL COMPRESSOR

2021 ◽  
pp. 1-13
Author(s):  
William Gooding ◽  
Matthew Meier ◽  
Nicole L. Key
Keyword(s):  
Flow Field ◽  
Centrifugal Compressor ◽  
Computational Models ◽  
Turbulence Models ◽  
Numerical Results ◽  
Computational Tools ◽  
Performance Trends ◽  
Sst Turbulence Model ◽  
Overall Performance ◽  
The Impact

Abstract Computational tools have become increasingly important in design and research applications in recent years due to increasing computational resources. In most cases, model geometry and flow-physics are simplified to reduce the complexity of the computational model. While this was necessary historically, modern computational tools are capable of including realistic features such as fillets, surface roughness, and heat transfer. This work presents extensive and systematic numerical results from a simulation of a centrifugal compressor stage for an aero-engine application. Numerical results are compared to detailed experimental data to investigate the effect of various modelling decisions, including turbulence models, on the predicted aerodynamics developing through the diffuser passage. Roughness and the inclusion of fillets significantly impact the flow development, especially with the SST turbulence model. This approach leads to the conclusion that the BSL-EARSM model is best able to predict the experimentally determined diffuser flow profiles and overall performance trends with the inclusion of the previously mentioned model features. Additionally, the misleading conclusions can be reached if modelling decisions are based on merely matching overall performance values. Finally, frozen rotor simulations are used to roughly approximate the impact of unsteadiness on the flow field. The results show a significant impact and also that the inclusion of approximate unsteady effects tends to further improve the predictive capability of the computational models that were considered.

Aerodynamic Analysis of a Multistage Centrifugal Compressor

2003 ◽  
Author(s):  
Duccio Bonaiuti ◽  
Andrea Arnone ◽  
Alberto Milani ◽  
Leonardo Baldassarre
Keyword(s):  
Flow Field ◽  
Centrifugal Compressor ◽  
Three Dimensional ◽  
Operating Range ◽  
Aerodynamic Analysis ◽  
Critical Elements ◽  
Multi Stage ◽  
The One ◽  
Multistage Centrifugal Compressor ◽  
The Impact

The aerodynamic analysis of a four–stage centrifugal compressor was performed by means of a three–dimensional multi stage CFD code. The whole operating range of the compressor was investigated and the critical elements affecting the choke and stall limit were identified. The isolated impellers were also analyzed separately and the flow field was compared to the one coming from the multistage analysis. This allowed us to study the effect of the interactions between components and quantify the impact of the multistage environment on the impellers’ performance.

Experimental and Numerical Investigation of a Centrifugal Compressor and Numerical Study of the Area Ratio and Tip Clearance Effects on the Performance Characteristic

2008 ◽  
Author(s):  
Mahdi Nili-Ahmadabadi ◽  
Ali Hajilouy-Benisi ◽  
Mohammad Durali ◽  
Sayyed Mostafa Motavalli
Keyword(s):  
Flow Field ◽  
Centrifugal Compressor ◽  
Numerical Study ◽  
Pressure Ratio ◽  
Three Dimensional ◽  
Area Ratio ◽  
Tip Clearance ◽  
Performance Characteristics ◽  
Navier Stokes ◽  
Sst Turbulence Model

In this research, the centrifugal compressor of a turbocharger is investigated experimentally and numerically. Performance characteristics of the compressor were obtained experimentally by measurements of rotor speed and flow parameters at the inlet and outlet of the compressor. Three dimensional flow field in the impeller and diffuser was analyzed numerically using a full Navier-Stokes program with SST turbulence model. The performance characteristics of the compressor were obtained numerically, which were then compared with the experimental results. The comparison shows good agreement. Furthermore, the effect of area ratio and tip clearance on the performance parameters and flow field was studied numerically. The impeller area ratio was changed by cutting the impeller exit axial width from an initial value of 4.1 mm to a final value of 5.1 mm, resulting in an area ratio from 0.792 to 0.965. For the rotor with exit axial width of 4.6 mm, performance was investigated for tip clearance of 0.0, 0.5 and 1.0 mm. Results of this simulation at design point showed that the compressor pressure ratio peaked at an area ratio of 0.792 while the efficiency peaked at a higher value of area ratio of 0.878. Also the increment of the tip clearance from 0 to 1 mm resulted in 20 percent efficiency decrease.

PIV Investigation of a High Speed Centrifugal Compressor Diffuser: Spanwise and Loading Variations

2008 ◽  
Author(s):  
Beni Cukurel ◽  
Patrick B. Lawless ◽  
Sanford Fleeter
Keyword(s):  
Flow Field ◽  
Centrifugal Compressor ◽  
High Speed ◽  
Three Dimensional ◽  
Operating Conditions ◽  
Vaned Diffuser ◽  
Operation Conditions ◽  
Diffuser Flow ◽  
Transonic Centrifugal Compressor ◽  
Flow Features

An efficient diffuser is essential to a modern compressor stage, due to its significance in stage performance, durability and operability. To address the need for data that describe the complex, unsteady flow field in a vaned diffuser, Particle Image Velocity is utilized to characterize the spanwise and circumferential variations of the flow features in the vaned diffuser passage of a transonic centrifugal compressor. The spanwise variation in the diffuser flow field is further investigated by comparison of 3 different operating conditions representative of low, nominal and high loading. These data demonstrate that not only the diffuser flow field is highly dependent on the operation conditions, e.g. hub-to-shroud variation increases with loading, but also the circumferential periodicity, created by the highly three dimensional impeller discharge flow, generates a larger unsteadiness towards the hub region of the vaned diffuser.

Numerical Analysis of the Vaned Diffuser of a Transonic Centrifugal Compressor

2010 ◽  
Vol 132 (4) ◽  
Author(s):  
Michele Marconcini ◽  
Filippo Rubechini ◽  
Andrea Arnone ◽  
Seiichi Ibaraki
Keyword(s):  
Flow Field ◽  
Centrifugal Compressor ◽  
Pressure Ratio ◽  
Three Dimensional ◽  
Navier Stokes ◽  
Flow Measurements ◽  
Vaned Diffuser ◽  
High Pressure Ratio ◽  
Unsteady Interaction ◽  
Inlet Conditions

A three-dimensional Navier–Stokes solver is used to investigate the flow field of a high pressure ratio centrifugal compressor for turbocharger applications. Such a compressor consists of a double-splitter impeller followed by a vaned diffuser. Particular attention is focused on the analysis of the vaned diffuser, designed for high subsonic inlet conditions. The diffuser is characterized by a complex three-dimensional flow field and influenced by the unsteady interaction with the impeller. Detailed particle image velocimetry flow measurements within the diffuser are available for comparison purposes.

scholarly journals The Impact of Various Modelling Decisions on Flow Field Predictions in a Centrifugal Compressor

2020 ◽  
Author(s):  
William J. Gooding ◽  
Matthew A. Meier ◽  
Nicole L. Key
Keyword(s):  
Flow Field ◽  
Centrifugal Compressor ◽  
Computational Models ◽  
Turbulence Models ◽  
Numerical Results ◽  
Computational Tools ◽  
Performance Trends ◽  
Sst Turbulence Model ◽  
Overall Performance ◽  
The Impact

Abstract Computational tools have become increasingly important in design and research applications in recent years due to increasing computational resources. In most cases, model geometry and flow-physics are simplified to reduce the complexity of the computational model. While this was necessary historically, modern computational tools are capable of including realistic features such as fillets, surface roughness, and heat transfer. This work presents extensive and systematic numerical results from a simulation of a centrifugal compressor stage for an aero-engine application. Numerical results are compared to detailed experimental data to investigate the effect of various modelling decisions, including turbulence models, on the predicted aerodynamics developing through the diffuser passage. Roughness and the inclusion of fillets significantly impact the flow development, especially with the SST turbulence model. This approach leads to the conclusion that the BSL-EARSM model is best able to predict the experimentally determined diffuser flow profiles and overall performance trends with the inclusion of the previously mentioned model features. Additionally, the misleading conclusions can be reached if modelling decisions are based on merely matching overall performance values. Finally, frozen rotor simulations are used to roughly approximate the impact of unsteadiness on the flow field. The results show a significant impact and also that the inclusion of approximate unsteady effects tends to further improve the predictive capability of the computational models that were considered.

Scale Adaptive Simulation of Transient Behavior in a Transonic Centrifugal Compressor With a Vaned Diffuser

2018 ◽  
Author(s):  
Ali Zamiri ◽  
Jin Taek Chung
Keyword(s):  
Flow Field ◽  
Centrifugal Compressor ◽  
Transient Flow ◽  
Stokes Equations ◽  
Flow Behavior ◽  
Navier Stokes ◽  
Mean Flow ◽  
Vaned Diffuser ◽  
Adaptive Simulation ◽  
Transonic Centrifugal Compressor

Three-dimensional, compressible, unsteady Navier-Stokes equations are solved to investigate the unsteady flow behavior in a transonic centrifugal compressor. The computational model is a high compression ratio centrifugal compressor (4:1) consisted of an inlet duct, an impeller (15 main blades and 15 splitters) and a diffuser vane with 24 two-dimensional wedge vanes. The aim of this study is to conduct a comprehensive assessment of the ability of a hybrid scale-adaptive simulation (SAS) turbulent model to characterize the transient flow structures within the compressor passages. The main idea of SAS approach, an improved URANS (unsteady Reynold-averaged Navier-Stokes) model, is based on the introduction of von Karman length scale into the turbulent scale equation which results in LES-like behavior in unsteady regions of the flow field. A numerical sensitivity test is performed to validate the computational results in terms of pressure ratio and compressor efficiency. Instantaneous and mean flow field analyses are presented in the impeller and the vaned diffuser. Applying transient simulations, it is shown that the interaction between the pressure waves and the surface pressure of the diffuser blades leads to a pulsating behavior within the diffuser. Moreover, spectral analysis is evaluated to analyze the BPF tonal noise as the main noise source of centrifugal compressors. In addition, the current SAS results are compared with those of the URANS-SST (shear stress transport) approach to show the ability of SAS approach in the prediction of the turbulent structures where the SAS model leads to a much better resolution of the unsteady fluctuations. This study shows that the current SAS approach, as an alternative to the existing hybrid RANS/LES methods, is promising in terms of prediction of transient phenomena like LES, but with a substantially reduced turn-around time.

Sign in / Sign up

Export Citation Format

Share Document