Clocking Effects in a 1.5 Stage Axial Turbine: Steady and Unsteady Experimental Investigations Supported by Numerical Simulations

2001 ◽  
Author(s):  
U. Reinmöller ◽  
B. Stephan ◽  
S. Schmidt ◽  
R. Niehuis
Keyword(s):  
Flow Field ◽  
Unsteady Flow ◽  
Secondary Flow ◽  
Energy Transport ◽  
Three Dimensional ◽  
Field Measurements ◽  
Flow Behaviour ◽  
Experimental Investigations ◽  
Axial Turbine ◽  
Outlet Flow

The interaction between rotor and stator airfoils in a multistage turbomachine causes an inherently unsteady flow field. In addition, different relative circumferential positions of several stator rows and rotor rows, respectively, have an influence on the flow behaviour in terms of loss generation, energy transport and secondary flow. The objective of the presented study is to investigate the effects of stator airfoil clocking on the performance of an 1-1/2 stage axial cold air turbine. The investigated axial turbine consists of two identical stators. The low aspect ratio of the blades and their prismatic design leads to a three-dimensional outlet flow with a high degree of secondary flow phenomena. Nevertheless, the small axial gaps between the blade rows are responsible for strong potential flow interaction with the radial wake regions in the measurement planes. Consequently, parts of the wakes of the first stator are clearly detected in the rotor outlet flow. To give an overview of the time-averaged flow field, measurements with pneumatic probes are conducted behind each blade row at ten different clocking-positions of the second stator. Further, an optimised clocking position was found due to a minimum in pressure loss behind the 2nd stator. The unsteady measurements are carried out with hot-wire probes for three selected stator-stator positions. Animations of selected flow properties show the influence of different circumferential positions of the second stator on the unsteady flow behaviour and secondary flow field. In addition and compared with experimental results three-dimensional unsteady viscous flow computations are performed.

Clocking Effects in a 1.5 Stage Axial Turbine—Steady and Unsteady Experimental Investigations Supported by Numerical Simulations

2001 ◽  
Vol 124 (1) ◽  
pp. 52-60 ◽  
Author(s):  
U. Reinmo¨ller ◽  
B. Stephan ◽  
S. Schmidt ◽  
R. Niehuis
Keyword(s):  
Flow Field ◽  
Unsteady Flow ◽  
Secondary Flow ◽  
Energy Transport ◽  
Flow Behavior ◽  
Three Dimensional ◽  
Field Measurements ◽  
Experimental Investigations ◽  
Axial Turbine ◽  
Outlet Flow

The interaction between rotor and stator airfoils in a multistage turbomachine causes an inherently unsteady flow field. In addition, different relative circumferential positions of several stator rows and rotor rows, respectively, have an influence on the flow behavior in terms of loss generation, energy transport and secondary flow. The objective of the presented study is to investigate the effects of stator airfoil clocking on the performance of a 1-1/2 stage axial cold air turbine. The investigated axial turbine consists of two identical stators. The low aspect ratio of the blades and their prismatic design leads to a three-dimensional outlet flow with a high degree of secondary flow phenomena. Nevertheless, the small axial gaps between the blade rows are responsible for strong potential flow interaction with the radial wake regions in the measurement planes. Consequently, parts of the wakes of the first stator are clearly detected in the rotor outlet flow. To give an overview of the time-averaged flow field, measurements with pneumatic probes are conducted behind each blade row at ten different clocking-positions of the second stator. Further, an optimized clocking position was found due to a minimum in pressure loss behind the second stator. The unsteady measurements are carried out with hot-wire probes for three selected stator-stator positions. Animations of selected flow properties show the influence of different circumferential positions of the second stator on the unsteady flow behavior and secondary flow field. In addition and compared with experimental results three-dimensional unsteady viscous flow computations are performed.

Time Accurate Euler Simulation of Interaction of Nozzle Wake and Secondary Flow With Rotor Blade in an Axial Turbine Stage Using Nonreflecting Boundary Conditions

1995 ◽  
Author(s):  
S. Fan ◽  
B. Lakshminarayana
Keyword(s):  
Flow Field ◽  
Boundary Conditions ◽  
Unsteady Flow ◽  
Secondary Flow ◽  
Rotor Blade ◽  
Three Dimensional ◽  
Computational Domain ◽  
Turbine Stage ◽  
Axial Turbine ◽  
Unsteady Pressure

The objective of this paper is to investigate the three dimensional unsteady flow interactions in a turbomachine stage. A three-dimensional time accurate Euler code has been developed using an explicit four-stage Runge-Kutta scheme. Three-dimensional unsteady non-reflecting boundary conditions are formulated at the inlet and at the outlet of the computational domain to remove the spurious numerical reflections. The three-dimensional code is first validated for 2-D and 3-D cascades with harmonic vortical inlet distortions. The effectiveness of non reflecting boundary conditions is demonstrated. The unsteady Euler solver is then used to simulate the propagation of nozzle wake and secondary flow through rotor and the resulting unsteady pressure field in an axial turbine stage. The three dimensional and time dependent propagation of nozzle wakes in the rotor blade row and the effects of nozzle secondary flow on the rotor unsteady surface pressure and passage flow field are studied. It was found that the unsteady flow field in the rotor is highly three-dimensional and the nozzle secondary flow has significant contribution to the unsteady pressure on the blade surfaces. Even though the steady flow at the midspan is nearly two-dimensional, the unsteady flow is 3-D and the unsteady pressure distribution can not by predicted by a 2-D analysis.

scholarly journals Experimental Study of a 3D Wake Decay and Secondary Flows Behind a Rotor Blade Row of a Low Speed Compressor Stage

1996 ◽  
Author(s):  
A. S. Witkowski ◽  
T. J. Chmielniak ◽  
M. D. Strozik
Keyword(s):  
Flow Field ◽  
Unsteady Flow ◽  
Secondary Flow ◽  
Rotor Blade ◽  
Three Dimensional ◽  
Secondary Flows ◽  
Operating Conditions ◽  
Tip Clearance ◽  
Compressor Stage ◽  
Blade Row

Detailed measurements have been performed in a low pressure axial flow compressor stage to investigate the structure of the secondary flow field and the three-dimensional wake decay at different axial locations before and behind the rotor. The three dimensional flow field upstream and downstream of the rotor and on the centerline of the stator blade passage have been sampled periodically using a straight and a 90 degree triple-split fiber probe. Radial measurements at 39 radial stations were carried out at chosen axial positions in order to get the span-wise characteristics of the unsteady flow. Taking the experimental values of the unsteady flow velocities and turbulence properties, the effects of the rotor blade wake decay and secondary flow on the blade row spacing and stator passage flow at different operating conditions are discussed. For the normal operating point, the component of radial turbulent intensities in the leakage-flow mixing region is found to be much higher than the corresponding axial and tangential components. But for a higher value of the flow coefficient the relations are different.The results of the experiments show that triple-split fiber probes, straight and 90 degree measurements, combined with the ensemble average technique are a very useful method for the analysis of rotor flow in turbomachinery. Tip clearance vortex, secondary flow near the hub and radial flow in the wake, turbulent intensity and Reynolds stresses and also the decay of the rotor wakes can be obtained by this method.

scholarly journals Endwall and Unsteady Flow Phenomena in an Axial Turbine Stage

1994 ◽  
Author(s):  
H. E. Gallus ◽  
J. Zeschky ◽  
C. Hah
Keyword(s):  
Flow Field ◽  
Unsteady Flow ◽  
Secondary Flow ◽  
Radial Distribution ◽  
Three Dimensional ◽  
Hot Wire ◽  
Turbine Stage ◽  
Flow Properties ◽  
Blade Row ◽  
Secondary Flow Field

Detailed experimental and numerical studies have been performed in a subsonic, axial-flow turbine stage to investigate the secondary flow field, the aerodynamic loss generation, and the spanwise mixing under a stage environment. The experimental study includes measurements of the static pressure distribution on the rotor blade surface and the rotor exit flow field using three-dimensional hot-wire and pneumatic probes. The rotor exit flow field was measured with an unsteady hot-wire probe which has high temporal and spatial resolution. Both steady and unsteady numerical analyses were performed with a three-dimensional Navier-Stokes code for the multiple blade rows. Special attention was focused on how well the steady multiple-blade-row calculation predicts the rotor exit flow field and how much the blade interaction affects the radial distribution of flow properties at the stage exit. Detailed comparisons between the measurement and the steady calculation indicate that the steady multiple-blade-row calculation predicts the overall time-averaged flow field very well. However, the steady calculation does not predict the secondary flow at the stage exit accurately. The current study indicates that the passage vortex near the hub of the rotor is transported toward the mid-span due to the blade interaction effects. And, the structure of the secondary flow field at the exit of the rotor is significantly modified by the unsteady effects. The time-averaged secondary flow field and the radial distribution of the flow properties, which are uses for the design of the following stage, can be predicted more accurately with the unsteady flow calculation.

Endwall and Unsteady Flow Phenomena in an Axial Turbine Stage

1995 ◽  
Vol 117 (4) ◽  
pp. 562-570 ◽  
Author(s):  
H. E. Gallus ◽  
J. Zeschky ◽  
C. Hah
Keyword(s):  
Flow Field ◽  
Unsteady Flow ◽  
Secondary Flow ◽  
Radial Distribution ◽  
Three Dimensional ◽  
Hot Wire ◽  
Turbine Stage ◽  
Flow Properties ◽  
Blade Row ◽  
Secondary Flow Field

Detailed experimental and numerical studies have been performed in a subsonic, axial-flow turbine stage to investigate the secondary flow field, the aerodynamic loss generation, and the spanwise mixing under a stage environment. The experimental study includes measurements of the static pressure distribution on the rotor blade surface and the rotor exit flow field using three-dimensional hot-wire and pneumatic probes. The rotor exit flow field was measured with an unsteady hot-wire probe, which has high temporal and spatial resolution. Both steady and unsteady numerical analyses were performed with a three-dimensional Navier–Stokes code for the multiple blade rows. Special attention was focused on how well the steady multiple-blade-row calculation predicts the rotor exit flow field and how much the blade interaction affects the radial distribution of flow properties at the stage exit. Detailed comparisons between the measurement and the steady calculation indicate that the steady multiple-blade-row calculation predicts the overall time-averaged flow field very well. However, the steady calculation does not predict the secondary flow at the stage exit accurately. The current study indicates that the passage vortex near the hub of the rotor is transported toward the midspan due to the blade interaction effects. Also, the structure of the secondary flow field at the exit of the rotor is significantly modified by the unsteady effects. The time-averaged secondary flow field and the radial distribution of the flow properties, which are used for the design of the following stage, can be predicted more accurately with the unsteady flow calculation.

Vortex-Wake-Blade Interaction in a Shrouded Axial Turbine

2004 ◽  
Author(s):  
J. Schlienger ◽  
A. I. Kalfas ◽  
R. S. Abhari
Keyword(s):  
Flow Field ◽  
Secondary Flow ◽  
Interaction Mechanism ◽  
Leading Edge ◽  
Field Measurements ◽  
Second Phase ◽  
Time Resolved ◽  
Axial Turbine ◽  
High Loss ◽  
High Level

This paper presents the results of time-resolved flow field measurements of a multistage shrouded axial turbine. The unsteady interaction mechanism between the rotor’s secondary flow vortices, the rotor’s wake and the adjacent blading at the exit plane of the first turbine stage is of prime interest and analysed in detail. Three key phases are identified for one blade passing event. The first phase shows a quasi undisturbed convection of the rotor’s secondary flow field into the downstream stator. The second phase shows a migration of high loss fluid from the wake layer into the passage and horse-shoe vortices at the rotor hub section. The relative motion between the rotor and stator blades brings the two vortices closer to the wake layer and lets the flow features interact with each other. The third phase focuses on the rotor indigenous hub vortices that are bent and stretched around the stator’s leading edge. The signal analysis of the time-resolved flow field indicates a high level of unsteadiness at the stator’s pressure side. The associated unsteadiness within the flow field is evaluated and quantified on the basis of pitchwise averaged space-time diagrams. The obtained results are finally discussed and explained using two flow schematics within and at the end of the paper.

Time-Accurate Euler Simulation of Interaction of Nozzle Wake and Secondary Flow With Rotor Blade in an Axial Turbine Stage Using Nonreflecting Boundary Conditions

1996 ◽  
Vol 118 (4) ◽  
pp. 663-678 ◽  
Author(s):  
S. Fan ◽  
B. Lakshminarayana
Keyword(s):  
Flow Field ◽  
Boundary Conditions ◽  
Unsteady Flow ◽  
Secondary Flow ◽  
Rotor Blade ◽  
Three Dimensional ◽  
Two Dimensional ◽  
Turbine Stage ◽  
Unsteady Pressure ◽  
Nonreflecting Boundary Conditions

The objective of this paper is to investigate the three-dimensional unsteady flow interactions in a turbomachine stage. A three-dimensional time-accurate Euler code has been developed using an explicit four-stage Runge–Kutta scheme. Three-dimensional unsteady nonreflecting boundary conditions are formulated at the inlet and the outlet of the computational domain to remove the spurious numerical reflections. The three-dimensional code is first validated for two-dimensional and three-dimensional cascades with harmonic vortical inlet distortions. The effectiveness of the nonreflecting boundary conditions is demonstrated. The unsteady Euler solver is then used to simulate the propagation of nozzle wake and secondary flow through the rotor and the resulting unsteady pressure field in an axial turbine stage. The three-dimensional and time-dependent propagation of nozzle wakes in the rotor blade row and the effects of nozzle secondary flow on the rotor unsteady surface pressure and passage flow field are studied. It was found that the unsteady flow field in the rotor is highly three dimensional and the nozzle secondary flow has significant contribution to the unsteady pressure on the blade surfaces. Even though the steady flow at the midspan is nearly two dimensional, the unsteady flow is three dimensional and the unsteady pressure distribution cannot be predicted by a two-dimensional analysis.

scholarly journals Transient Three-Dimensional Flow Field Measurements by Means of 3D µPTV in Drying Poly(Vinyl Acetate)-Methanol Thin Films Subject to Short-Scale Marangoni Instabilities

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1223
Author(s):  
Max Tönsmann ◽  
Philip Scharfer ◽  
Wilhelm Schabel
Keyword(s):  
Flow Field ◽  
Vinyl Acetate ◽  
Three Dimensional ◽  
Field Measurements ◽  
Initial Assessment ◽  
Ambient Conditions ◽  
Three Dimensional Flow ◽  
Dimensional Flow ◽  
Short Scale ◽  
Dry Film

Convective Marangoni instabilities in drying polymer films may induce surface deformations, which persist in the dry film, deteriorating product performance. While theoretic stability analyses are abundantly available, experimental data are scarce. We report transient three-dimensional flow field measurements in thin poly(vinyl acetate)-methanol films, drying under ambient conditions with several films exhibiting short-scale Marangoni convection cells. An initial assessment of the upper limit of thermal and solutal Marangoni numbers reveals that the solutal effect is likely to be the dominant cause for the observed instabilities.

scholarly journals Incidence Angle and Pitch-Chord Effects on Secondary Flows Downstream of a Turbine Cascade

1992 ◽  
Author(s):  
A. Perdichizzi ◽  
V. Dossena
Keyword(s):  
Flow Field ◽  
Secondary Flow ◽  
Incidence Angle ◽  
Three Dimensional ◽  
Secondary Flows ◽  
Pressure Probe ◽  
Turbine Cascade ◽  
Oil Flow ◽  
Secondary Velocity ◽  
Secondary Flow Field

This paper describes the results of an experimental investigation of the three-dimensional flow downstream of a linear turbine cascade at off-design conditions. The tests have been carried out for five incidence angles from −60 to +35 degrees, and for three pitch-chord ratios: s/c = 0.58,0.73,0.87. Data include blade pressure distributions, oil flow visualizations, and pressure probe measurements. The secondary flow field has been obtained by traversing a miniature five hole probe in a plane located at 50% of an axial chord downstream of the trailing edge. The distributions of local energy loss coefficients, together with vorticity and secondary velocity plots show in detail how much the secondary flow field is modified both by incidence and cascade solidity variations. The level of secondary vorticity and the intensity of the crossflow at the endwall have been found to be strictly related to the blade loading occurring in the blade entrance region. Heavy changes occur in the spanwise distributions of the pitch averaged loss and of the deviation angle, when incidence or pitch-chord ratio is varied.

Assessment of Unsteady Flows in Turbines

1992 ◽  
Vol 114 (1) ◽  
pp. 79-90 ◽  
Author(s):  
O. P. Sharma ◽  
G. F. Pickett ◽  
R. H. Ni
Keyword(s):  
Unsteady Flow ◽  
Three Dimensional ◽  
Flow Simulation ◽  
Experimental Investigations ◽  
Flow Parameters ◽  
Research Activities ◽  
Flow Features ◽  
Computational Fluid Dynamics Cfd ◽  
Turbine Design ◽  
The Impact

The impacts of unsteady flow research activities on flow simulation methods used in the turbine design process are assessed. Results from experimental investigations that identify the impact of periodic unsteadiness on the time-averaged flows in turbines and results from numerical simulations obtained by using three-dimensional unsteady Computational Fluid Dynamics (CFD) codes indicate that some of the unsteady flow features can be fairly accurately predicted. Flow parameters that can be modeled with existing steady CFD codes are distinguished from those that require unsteady codes.

Sign in / Sign up

Export Citation Format

Share Document