Computational Fluid Dynamics Modelling of a Load Sensing Proportional Valve

2019 ◽  
Author(s):  
Alessandro Corvaglia ◽  
Giorgio Altare ◽  
Roberto Finesso ◽  
Massimo Rundo
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Steady State ◽  
Complex Geometry ◽  
Ansys Fluent ◽  
Proportional Valve ◽  
Fluid Forces ◽  
Load Sensing ◽  
Cfd Models ◽  
Dynamics Modelling

Abstract In this paper, two 3D CFD models of a load sensing proportional valve are contrasted. The models were developed with two different software, Simerics PumpLinx® and ANSYS Fluent®. In both cases the mesh was dynamically modified based on the fluid forces acting on the local compensator. In the former, a specific template for valves was used, in the latter a user-defined function was implemented. The models were validated in terms of flow rate and pressure drop for different positions of the main spool by means of specific tests. Two configurations were tested: with the local compensator blocked and free to regulate. The study has brought to evidence the reliability of the CFD models in evaluating the steady-state characteristics of valves with complex geometry.

scholarly journals Minimising exposure to droplet and aerosolised pathogens: a computational fluid dynamics study

2020 ◽  
Author(s):  
Paolo Perella ◽  
Mohammad Tabarra ◽  
Ertan Hataysal ◽  
Amir Pournasr ◽  
Ian Renfrew
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Suction Catheter ◽  
Particle Removal ◽  
Ansys Fluent ◽  
Protective Shield ◽  
Pragmatic Clinical Trials ◽  
Fluent Software ◽  
Dynamics Modelling ◽  
Suction Flow

BackgroundHazardous pathogens are spread in either droplets or aerosols produced during aerosol generating procedures (AGP). Adjuncts minimising exposure of healthcare workers to hazardous pathogens released during AGP may be beneficial. We used state-of-the-art Computational Fluid Dynamics modelling to optimise the performance of a custom-designed shield.MethodsWe modelled airflow patterns and trajectories of particles (size range 1–500µm) emitted during a typical cough using Computational Fluid Dynamics (ANSYS Fluent software), in the presence and absence of a protective shield enclosing the head of a patient. We modelled the effect of different shield designs, suction tube position, and suction flow rate on particle escape from the shield.ResultsUse of the shield prevented escape of 99.1–100% of particles, which were either trapped on the shield walls (16–21%) or extracted via suction (79–82%). At most, 0.9% particles remained floating inside the shield. Suction flow rates (40–160L min−1) had no effect on the final location of particles in a closed system. Particle removal from within the shield was optimal when a suction catheter was placed vertically next to the head of the patient. Addition of multiple openings in the shield reduced the purging performance from 99% at 160 L min−1 to 67% at 40 L min−1.ConclusionComputational fluid dynamics modelling provides information to guide optimisation of the efficient removal of hazardous pathogens released during AGP from a custom-designed shield. These data are essential to establish before clinical use and/or pragmatic clinical trials.

Validation of Computational Fluid Dynamics Models for Industrial Applications

2021 ◽  
Author(s):  
Milorad B. Dzodzo
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Complex Geometry ◽  
Mesh Size ◽  
Industrial Applications ◽  
Cfd Models ◽  
Long Duration ◽  
Computational Fluid Dynamics Cfd ◽  
Accident Scenarios ◽  
Dynamics Models

Abstract Validation of Computational Fluid Dynamics (CFD) models for industrial applications is more challenging due to the complex geometry and long duration and complexity of various postulated accident scenarios, resulting in different and wide ranges of length and time scales. Thus, CFD models for industrial applications are restricted to the smaller subdomains and short periods of postulated accident scenarios. Validation is most often based on the comparisons with experimental results obtained with the scaled down test facilities. Thus, the effect of scaling needs to be considered and incorporated in the validation process. During validation, valuable experience is gained related to geometry simplifications, needed mesh size, turbulence and heat transfer modeling, effects of initial and boundary conditions, different fluid thermophysical properties and interaction with other phenomena and processes. Based on the gained experience the validated CFD models are adjusted and used to simulate prototypical domains and conditions. Several examples of validations of CFD models for industrial applications are presented.

scholarly journals Wind-Induced Phenomena in Long-Span Cable-Supported Bridges: A Comparative Review of Wind Tunnel Tests and Computational Fluid Dynamics Modelling

2021 ◽  
Vol 11 (4) ◽  
pp. 1642
Author(s):  
Yuxiang Zhang ◽  
Philip Cardiff ◽  
Jennifer Keenahan
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Tunnel ◽  
Careful Analysis ◽  
Wind Effects ◽  
Wind Tunnel Tests ◽  
Long Span Bridges ◽  
Long Span ◽  
Comparative Review ◽  
Dynamics Modelling

Engineers, architects, planners and designers must carefully consider the effects of wind in their work. Due to their slender and flexible nature, long-span bridges can often experience vibrations due to the wind, and so the careful analysis of wind effects is paramount. Traditionally, wind tunnel tests have been the preferred method of conducting bridge wind analysis. In recent times, owing to improved computational power, computational fluid dynamics simulations are coming to the fore as viable means of analysing wind effects on bridges. The focus of this paper is on long-span cable-supported bridges. Wind issues in long-span cable-supported bridges can include flutter, vortex-induced vibrations and rain–wind-induced vibrations. This paper presents a state-of-the-art review of research on the use of wind tunnel tests and computational fluid dynamics modelling of these wind issues on long-span bridges.

CFD Leakage Predictions of Unworn and Worn Labyrinth Seals With and Without Tooth Axial Offset

2017 ◽  
Author(s):  
Hasham H. Chougule ◽  
Alexander Mirzamoghadam
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Numerical Modeling ◽  
Steady State ◽  
Flow Field ◽  
Labyrinth Seals ◽  
Small Clearance ◽  
Total Leakage ◽  
Computational Fluid Dynamics Cfd ◽  
Flow Deflection

The objective of this study is to develop a Computational Fluid Dynamics (CFD) based methodology for analyzing and predicting leakage of worn or rub-intended labyrinth seals during operation. The simulations include intended tooth axial offset and numerical modeling of the flow field. The purpose is to predict total leakage through the seal when an axial tooth offset is provided after the intended/unintended rub. Results indicate that as expected, the leakage for the in-line worn land case (i.e. tooth under rub) is higher compared to unworn. Furthermore, the intended rotor/teeth forward axial offset/shift with respect to the rubbed land reduces the seal leakage. The overall leakage of a rubbed seal with axial tooth offset is observed to be considerably reduced, and it can become even less than a small clearance seal designed not to rub. The reduced leakage during steady state is due to a targeted smaller running gap because of tooth offset under the intended/worn land groove shape, higher blockages, higher turbulence and flow deflection as compared to worn seal model without axial tooth offset.

Transportation Performance of Highly Concentrated Coal-Water Slurries Prepared from Indian Coals

2014 ◽  
Vol 592-594 ◽  
pp. 869-873 ◽  
Author(s):  
Arunanshu Chakravarthy ◽  
Satish Kumar ◽  
S.K. Mohapatra
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Rheological Behaviour ◽  
Pseudoplastic Fluid ◽  
Ansys Fluent ◽  
Water Slurry ◽  
Solids Concentration ◽  
Coal Water Slurry ◽  
Indian Coals ◽  
Fluid Behaviour

The rheological behaviour of concentrated coal-water slurries prepared from three different Indian coals were investigated using an Anton Paar rheometer. The perspective was laid in to study the effect of solids concentration on the rheological behaviour of coal water slurry. It was observed that coal water slurry exhibited non-Newtonian pseudoplastic fluid behaviour at concentrations above 30 % by weight. The apparent viscosity varied with the amount of coal in the slurry. The rheological data were utilized to predict the pressure drop characteristics of coal water slurry flowing through a 53 mm diameter slurry pipeline using ANSYS Fluent 14.0 computational fluid dynamics code.

scholarly journals Modelling of working processes of non-contact oil free vacuum pumps by computational fluid dynamics (CFD) methods

2021 ◽  
Vol 2059 (1) ◽  
pp. 012003
Author(s):  
A Burmistrov ◽  
A Raykov ◽  
S Salikeev ◽  
E Kapustin
Keyword(s):  
Fluid Dynamics ◽  
Experimental Data ◽  
Computational Fluid Dynamics ◽  
Mathematical Models ◽  
Cfd Models ◽  
Ansys Cfx ◽  
Sst Turbulence Model ◽  
Computational Fluid Dynamics Cfd ◽  
Dynamic Meshing ◽  
Comparison With Experimental Data

Abstract Numerical mathematical models of non-contact oil free scroll, Roots and screw vacuum pumps are developed. Modelling was carried out with the help of software CFD ANSYS-CFX and program TwinMesh for dynamic meshing. Pumping characteristics of non-contact pumps in viscous flow with the help of SST-turbulence model were calculated for varying rotors profiles, clearances, and rotating speeds. Comparison with experimental data verified adequacy of developed CFD models.

Sign in / Sign up

Export Citation Format

Share Document