Dimensional Synthesis of a Novel 2T2R Parallel Manipulator for Medical Applications

2014 ◽  
Author(s):  
Nitish Kumar ◽  
Olivier Piccin ◽  
Bernard Bayle
Keyword(s):  
Parallel Mechanism ◽  
Parallel Manipulator ◽  
Screw Theory ◽  
Structural Parameters ◽  
Geometric Analysis ◽  
Medical Applications ◽  
Dimensional Synthesis ◽  
Synthesis Algorithm ◽  
Percutaneous Procedures ◽  
Actuated Joints

This paper deals with the dimensional synthesis of a novel parallel manipulator for medical applications. This parallel mechanism has a novel 2T2R mobility derived from the targeted application of needle manipulation. The kinematic design of this 2T2R manipulator and its novelty are illustrated in relation to the percutaneous procedures. Due to the demanding constraints on its size and compactness, achieving a large workspace especially in orientation, is a rather difficult task. The workspace size and kinematic constraint analysis are considered for the dimensional synthesis of this 2T2R parallel mechanism. A dimensional synthesis algorithm based on the screw theory and the geometric analysis of the singularities is described. This algorithm also helps to eliminate the existence of voids inside the workspace. The selection of the actuated joints is validated. Finally, the dimensions of the structural parameters of the mechanism are calculated for achieving the required workspace within the design constraints of size, compactness and a preliminary prototype without actuators is presented.

Type Synthesis of Uncoupled 2T2R Parallel Manipulators

2012 ◽  
Author(s):  
Yanbin Zhang ◽  
Kwun-lon Ting
Keyword(s):  
Parallel Manipulator ◽  
Screw Theory ◽  
Control Design ◽  
Parallel Manipulators ◽  
Velocity Space ◽  
Type Synthesis ◽  
Systematic Method ◽  
Structure Synthesis ◽  
Hybrid Manipulator ◽  
Actuated Joints

This paper presents a simple and systematic method for type synthesis of four-degree-of-freedom uncoupled parallel manipulators with two-translational and two-rotational (2T2R) motion components. Based on the concept of hybrid manipulator, one uncoupled 2T2R hybrid manipulator, which is composed of one full-isotropic planar 2T1R parallel manipulator and one revolute joint in serial assembly, is designed first. Then the structure synthesis of the fourth leg of 2T2R parallel manipulator is performed in terms of the reciprocal screw theory. Finally, the type synthesis of uncoupled 2T2R parallel manipulators is realized by combining the uncoupled 2T2R hybrid manipulator and one of the synthesized fourth legs. The Jacobian of the uncoupled 2T2R parallel manipulator is a 4×4 diagonal matrix. Therefore, there exists a one-to-one correspondence between the input velocity space of the actuated joints and the output velocity space of the moving platform. Moreover, both the control design and the path planning of these proposed manipulators are very simple.

Design and Kinematics Analysis of a Novel Planar Parallel Mechanism

2014 ◽  
Vol 568-570 ◽  
pp. 904-910
Author(s):  
Yan Bin Zhang ◽  
Hui Ping Wang
Keyword(s):  
Condition Number ◽  
Parallel Mechanism ◽  
Jacobian Matrix ◽  
Screw Theory ◽  
Kinematics Analysis ◽  
Moving Platform ◽  
One To One ◽  
Actuated Joints

A novel 3-dof planar parallel mechanism, which is composed by three different limbs, is designed. The moving platform can translate along two directions and rotate around one axis with respect to the base. Mobility of the mechanism is discussed and calculated based on the screw theory. The forward and the inverse analytical position equations are derived and the veloctiy analysis is addressed too. The Jacobian matrix is an identical one, so there exists one-to-one corresponding linear controlling relationship between one of the actuated joints and one of the outputs of the platform. Moreover, the condition number of the Jacobian matrix is constantly equal to one and the mechanism shows fully-isotropic throughout entire workspace.

Dimensional Synthesis of a 2UPS-UPR Parallel Machine Tool

2009 ◽  
Vol 16-19 ◽  
pp. 554-558
Author(s):  
Liang Zhao ◽  
Ya Dong Gong ◽  
Jian Ye Guo ◽  
Guang Qi Cai
Keyword(s):  
Condition Number ◽  
Performance Index ◽  
Machine Tools ◽  
Parallel Mechanism ◽  
Jacobian Matrix ◽  
Structural Parameters ◽  
Parallel Machine ◽  
Dimensional Synthesis ◽  
Parallel Machine Tools ◽  
Parallel Machine Tool

This paper deals with the dimensional synthesis of a 2UPS-UPR parallel mechanism tool newly designed by Northeastern University. On the basis of establishing kinematics equations and obtaining Jacobian matrix, the performance index of dimensional synthesis is given which is the average of 729 values of the condition number of Jacobian matrix corresponding to 729 positions in the workspace. With MATLAB software, the effects are simulated which the structural parameters of parallel machine tools have on dimensional synthesis, their change laws are gained, and then dimensional synthesis of parallel machine tools is conducted based on these laws.

Optimal Design of Spherical 5R Parallel Manipulators Considering the Motion/Force Transmissibility

2010 ◽  
Vol 132 (3) ◽  
Author(s):  
Chao Wu ◽  
Xin-Jun Liu ◽  
Liping Wang ◽  
Jinsong Wang
Keyword(s):  
Performance Evaluation ◽  
Optimal Design ◽  
Parallel Manipulator ◽  
Screw Theory ◽  
Parallel Manipulators ◽  
Dimensional Synthesis ◽  
Force Transmission ◽  
Minimally Invasive Surgical ◽  
Pointing Device ◽  
Force Transmissibility

The spherical 5R parallel manipulator is a typical parallel manipulator. It can be used as a pointing device or as a minimally invasive surgical robot. This study addresses the motion/force transmission analysis and optimization of the manipulator by taking into account the motion/force transmissibility. The kinematics of the manipulator is analyzed. Several transmission indices are defined by using screw theory for the performance evaluation and dimensional synthesis. The process of determining the optimal angular parameters based on performance charts is presented. The manipulator that has a large workspace and good motion/force transmissibility is identified.

Jacobian-based stiffness analysis method for parallel manipulators with non-redundant legs

2015 ◽  
Vol 230 (3) ◽  
pp. 341-352 ◽  
Author(s):  
Antonius GL Hoevenaars ◽  
Patrice Lambert ◽  
Just L Herder
Keyword(s):  
Parallel Manipulator ◽  
Screw Theory ◽  
Parallel Manipulators ◽  
Structural Elements ◽  
Analysis Method ◽  
End Effector ◽  
Stiffness Analysis ◽  
Compliant Joints ◽  
Lower Mobility ◽  
Actuated Joints

Stiffness is an important element in the model of a parallel manipulator. A complete stiffness analysis includes the contributions of joints as well as structural elements. Parallel manipulators potentially include both actuated joints, passive compliant joints, and zero stiffness joints, while a leg may impose constraints on the end-effector in the case of lower mobility parallel manipulators. Additionally, parallel manipulators are often designed to interact with an environment, which means that an external wrench may be applied to the end-effector. This paper presents a Jacobian-based stiffness analysis method, based on screw theory, that effectively considers all above aspects and which also applies to parallel manipulators with non-redundant legs.

scholarly journals Neural Network and Performance Analysis for a Novel Reconfigurable Parallel Manipulator Based on the Spatial Multiloop Overconstrained Mechanism

2020 ◽  
Vol 2020 ◽  
pp. 1-21
Author(s):  
Guanyu Huang ◽  
Dan Zhang ◽  
Qi Zou
Keyword(s):  
Neural Network ◽  
Bp Neural Network ◽  
Parallel Mechanism ◽  
Parallel Manipulator ◽  
Jacobian Matrix ◽  
Structural Parameters ◽  
Kinematic Model ◽  
Industrial Area ◽  
And Performance ◽  
The Relationship

To meet the different requirements in the industrial area, a novel reconfigurable parallel mechanism is proposed based on the spatial multiloop overconstrained mechanism. The configurations can be changed by driving the low-DOF (degree-of-freedom) overconstrained mechanism. The mobility of this mechanism is investigated. And the kinematic model and Jacobian matrix are both established. Based on the Jacobian matrix, the workspace, stiffness, and conditional number are all analyzed. To focus on the application in the industrial area, this paper proposes a method to establish the relationship between the performance and the structural parameters by using the modified BP neural network. Based on this method, the structural parameters can be chosen by the requirements of the special task in the industrial area. Finally, some numerical examples are presented to verify the method.

Mobility analysis and kinematic synthesis of a novel 4-DoF parallel manipulator

Robotica ◽  
2014 ◽  
Vol 34 (5) ◽  
pp. 1010-1025 ◽  
Author(s):  
Gang Dong ◽  
Tao Sun ◽  
Yimin Song ◽  
Hao Gao ◽  
Binbin Lian
Keyword(s):  
Parallel Manipulator ◽  
Degrees Of Freedom ◽  
Large Scale ◽  
Screw Theory ◽  
Programming Approach ◽  
The Novel ◽  
Dimensional Synthesis ◽  
Vector Method ◽  
Dimensional Parameters ◽  
Design And Manufacture

SUMMARYThis paper proposes a novel parallel manipulator with 1 translational and 3 rotational degrees of freedom, which may be designed as the docking equipment for large-scale component assemblage in the aircraft industry. First, the mobility and kinematic analysis of the novel manipulator is performed using the screw theory and the closed-loop vector method. To evaluate the kinematic performance of the manipulator, its workspace is calculated, and the dimensional homogeneous Jacobian matrix of this manipulator is deduced. Mainly based on a nonlinear programming approach, the kinematic dimensional synthesis is performed to optimise the dimensional parameters of this novel parallel manipulator in a prescribed workspace. The results of this paper may lay a solid foundation for the prototype design and manufacture of the novel parallel manipulator.

Kinematic analysis and dimensional synthesis of a three-degrees-of-freedom hybrid-drive parallel mechanism

2018 ◽  
Vol 233 (8) ◽  
pp. 2728-2752 ◽  
Author(s):  
Xingyu Zhao ◽  
Tieshi Zhao ◽  
Xuehan Xu ◽  
Hui Bian ◽  
Shixing Ding
Keyword(s):  
Performance Index ◽  
Kinematic Analysis ◽  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Screw Theory ◽  
Direct Method ◽  
Dimensional Synthesis ◽  
Hybrid Drive ◽  
Drive Mechanism ◽  
Three Degrees Of Freedom

With the increasing demand for the attitude adjustment and vibration isolation of the precision instruments, this paper proposes a three-degrees-of-freedom hybrid-drive parallel mechanism and carries out the kinematic analysis and dimensional synthesis for it. First, the advantages of the hybrid-drive unit are introduced by comparison with the common driving methods. Then, the degrees of freedom of the hybrid-drive parallel mechanism is analyzed by constrained screw method, and the displacement mapping relationship between the generalized input and the moving platform is obtained by a successive approximation iteration method. Furthermore, the first-order and the second-order influence coefficients of the hybrid-drive mechanism are established on the basis of screw theory and the direct method. Besides, the operational dexterity index, the transfer performance index and the stiffness performance index of the hybrid-drive mechanism are introduced, and each single-objective dimensional synthesis of the hybrid-drive mechanism is carried out by the interior point method. Moreover, the multi-objective dimensional synthesis of the hybrid-drive mechanism is proposed by combining the genetic algorithm and the Pareto-optimal solution. Finally, taking the integer numbers of No.23 Pareto set as the numerical example, the kinematics formulas of the hybrid-drive mechanism are verified by the simulation and the experiment.

Performance evaluation of a special 6-PUS type parallel manipulator

Robotica ◽  
2021 ◽  
pp. 1-15
Author(s):  
Xiaochu Liu ◽  
Yunfei Cai ◽  
Weitian Liu ◽  
Linlong Zhang ◽  
Chengxin Hu
Keyword(s):  
Performance Evaluation ◽  
Natural Frequency ◽  
Parallel Manipulator ◽  
Screw Theory ◽  
Shaking Table ◽  
Axial Stiffness ◽  
Neutral Position ◽  
Dynamics Model ◽  
Force Transmissibility ◽  
Kane Method

Abstract In this paper, a special 6-PUS parallel manipulator (PM) is utilized as a shaking table. Unlike the existing results about 6-PUS PMs, we make the actuator direction collinear with the linkage direction at neutral position. With respect to the application background, a further analysis of the special PM is carried out from the perspective of motion/force transmissibility, natural frequency and acceleration capability. Specially, the complete dynamics model is established based on the Kane method. Then, generalized transmission indices based on the screw theory are utilized to reflect its motion ability, and a model of natural frequency is proposed with the axial stiffness of linkages considered. Finally, the effect of the angle between the actuator direction and the linkage direction α on various performances is analyzed, and other results are included to illustrate its feasibility and usability.

Workspace, dexterity and dimensional optimization of microhexapod

2015 ◽  
Vol 35 (4) ◽  
pp. 341-347 ◽  
Author(s):  
E. Rouhani ◽  
M. J. Nategh
Keyword(s):  
Degrees Of Freedom ◽  
Optimization Problem ◽  
Screw Theory ◽  
Design Parameters ◽  
Dimensional Synthesis ◽  
Content Type ◽  
Workspace Analysis ◽  
The Difference ◽  
Flexure Joints ◽  
6 Degrees Of Freedom

Purpose – The purpose of this paper is to study the workspace and dexterity of a microhexapod which is a 6-degrees of freedom (DOF) parallel compliant manipulator, and also to investigate its dimensional synthesis to maximize the workspace and the global dexterity index at the same time. Microassembly is so essential in the current industry for manufacturing complicated structures. Most of the micromanipulators suffer from their restricted workspace because of using flexure joints compared to the conventional ones. In addition, the controllability of micromanipulators inside the whole workspace is very vital. Thus, it is very important to select the design parameters in a way that not only maximize the workspace but also its global dexterity index. Design/methodology/approach – Microassembly is so essential in the current industry for manufacturing complicated structures. Most of the micromanipulators suffer from their restricted workspace because of using flexure joints compared to the conventional ones. In addition, the controllability of micromanipulators inside the whole workspace is very vital. Thus, it is very important to select the design parameters in a way that not only maximize the workspace but also its global dexterity index. Findings – It has been shown that the proposed procedure for the workspace calculation can considerably speed the required calculations. The optimization results show that a converged-diverged configuration of pods and an increase in the difference between the moving and the stationary platforms’ radii cause the global dexterity index to increase and the workspace to decrease. Originality/value – The proposed algorithm for the workspace analysis is very important, especially when it is an objective function of an optimization problem based on the search method. In addition, using screw theory can simply construct the homogeneous Jacobian matrix. The proposed methodology can be used for any other micromanipulator.

Sign in / Sign up

Export Citation Format

Share Document