Parametric Resonance of Electrostatically Actuated MEMS Cantilever Resonators Using Method of Multiple Scales and Homotopy Perturbation Method

2017 ◽  
Author(s):  
Christopher Reyes ◽  
Dumitru I. Caruntu
Keyword(s):  
Perturbation Method ◽  
Parametric Resonance ◽  
Homotopy Perturbation Method ◽  
Multiple Scales ◽  
Method Of Multiple Scales ◽  
Electrostatic Force ◽  
Plate Electrode ◽  
Electrostatically Actuated ◽  
Homotopy Perturbation ◽  
Ground Plate

This paper investigates the dynamics governing the behavior of electrostatically actuated MEMS cantilever resonators. The cantilever is held parallel to a ground plate (electrode) with an AC voltage between the plate and the electrode causing the electrostatic actuation (excitation). For the purposes of this paper this is soft excitation. The frequency of the excitation is near the natural frequency of the cantilever leading to what is known as parametric resonance. The electrostatic force in the problem investigated throughout the paper is nonlinear in nature and includes the fringe effect. Two methods are used in investigating this problem: the method of multiple scales (MMS) and the homotopy perturbation method (HPM). The two methods work well for small non-linearities and small amplitudes. The influence of voltage, fringe, damping, Casimir, and Van der Waals parameters will be investigated in this paper using MMS and HPM as a means of verifying the results obtained.

Voltage Response of Parametric Resonance of MEMS Circular Plates Under Hard Excitations

2019 ◽  
Author(s):  
Julio S. Beatriz ◽  
Dumitru I. Caruntu
Keyword(s):  
Parametric Resonance ◽  
Multiple Scales ◽  
Method Of Multiple Scales ◽  
Electrostatic Force ◽  
Voltage Response ◽  
Circular Plates ◽  
Order Model ◽  
Reduced Order ◽  
Electrostatically Actuated ◽  
Modes Of Vibration

Abstract This work deals with the voltage response of parametric resonance of electrostatically actuated microelectromechanical (MEMS) circular plates under hard excitations. Method of Multiple Scales (MMS) and Reduced Order Model (ROM) method using two modes of vibration are used to predict the voltage-amplitude response of the MEMS circular plates. ROM is solved using AUTO 07p, a software package for continuation and bifurcation. MMS used in this paper has one term in the electrostatic force being considered significant. This is the way MMS is used to model hard excitations. MMS shows results similar to those of ROM at lower amplitudes and lower voltages. The differences between the two methods, MMS and ROM, are significant in high amplitudes for all voltages, and the differences are significant in all amplitudes for larger voltages. Significant differences can be noted in the effect of different parameters such as the detuning frequency and damping on the voltage response. ROM AUTO 07p is calibrated using ROM time responses in which the ROM is solved using the solver ode15s in Matlab.

On the Primary Resonance of an Electrostatically Actuated MEMS Using the Homotopy Perturbation Method

2009 ◽  
Author(s):  
Mahdi Mojahedi ◽  
Mahdi Moghimi Zand ◽  
Mohammad Taghi Ahmadian
Keyword(s):  
Differential Equation ◽  
Perturbation Method ◽  
Homotopy Perturbation Method ◽  
Multiple Scales ◽  
Electrostatic Force ◽  
Nonlinear Partial Differential Equation ◽  
Primary Resonance ◽  
Analytic Solutions ◽  
Design Parameters ◽  
Homotopy Perturbation

In this paper, primary resonance of a double-clamped microbeam has been investigated. The Microbeam is predeformed by a DC electrostatic force and then driven to vibrate by an AC harmonic electrostatic force. Effects of midplane stretching, axial loads and damping are considered in modeling. Galerkin’s approximation is utilized to convert the nonlinear partial differential equation of motion to a nonlinear ordinary differential equation. Afterward, a combination of homotopy perturbation method and the method of multiple scales are utilized to find analytic solutions to the steady-state motion of the microbeam, far from pull-in. The effects of different design parameters on dynamic behavior are discussed. The results obtained by the presented method are validated by comparing with literature.

Frequency Response of Parametric Resonance of Electrostatically Actuated Circular Plates Under Hard Excitations

2019 ◽  
Author(s):  
Julio Beatriz ◽  
Dumitru I. Caruntu
Keyword(s):  
Frequency Response ◽  
Parametric Resonance ◽  
Multiple Scales ◽  
Method Of Multiple Scales ◽  
Reduced Order Model ◽  
Circular Plates ◽  
Order Model ◽  
Reduced Order ◽  
Electrostatically Actuated ◽  
Modes Of Vibration

Abstract In this paper, the Method of Multiple Scales, and the Reduced Order Model method of two modes of vibration are used to investigate the amplitude-frequency response of parametric resonance of electrostatically actuated circular plates under hard excitations. Results show that the Method of Multiple Scales is accurate for low voltages. However, it starts to separate from the Reduced Order Model results as the voltage values are larger. The Method of Multiple Scales is good for low amplitudes and weak non-linearities. Furthermore the Reduced Order Model running with AUTO 07p is validated and calibrated using the 2 Term ROM time responses.

Amplitude-Frequency Response for Superharmonic Resonance of Fourth Order of Electrostatically Actuated MEMS Cantilever Resonators

2019 ◽  
Author(s):  
Dumitru I. Caruntu ◽  
Christopher Reyes
Keyword(s):  
Frequency Response ◽  
Fourth Order ◽  
Microelectromechanical Systems ◽  
Multiple Scales ◽  
Electrostatic Force ◽  
Damping Force ◽  
Superharmonic Resonance ◽  
Electrostatically Actuated ◽  
Homotopy Analysis ◽  
Ground Plate

Abstract This paper deals with the frequency response of superharmonic resonance of order four of electrostatically actuated MicroElectroMechanical Systems (MEMS) cantilever resonators. The MEMS structure in this work consists of a microcantilever parallel to an electrode ground plate. The MEMS resonator is elelctrostatically actuated through an AC voltage between the cantilever and the ground plate. The voltage is in the category of hard excitation. The AC frequency is near one eight of the natural frequency of the resonator. Since the electrostatic force acting on the resonator is proportional to the square of the voltage, it leads to superharmonic resonance of fourth order. Besides the electrostatic force, the system experiences damping. The damping force in this work is proportional to the velocity of the resonator, i.e. it is linear damping. Three methods are employed in this investigation. First, the Method of Multiple Scales (MMS), a perturbation method, is used predictions of the resonant regions for weak nonlinearities and small to moderate amplitudes. Second, the Homotopy Analysis Method (HAM), and third, the Reduced Order Model (ROM) method using two modes of vibration are also utilized to investigate the resonance. ROM is solved through numerical integration using Matlab in order to simulate time responses of the structure. All methods are in agreement for moderate nonlinearities and small to moderate amplitudes. This work shows that adequate MMS and HAM provide good predictions of the resonance.

Reduced Order Model for MEMS Cantilever Resonators Under Soft AC Voltage Near Natural Frequency

2012 ◽  
Author(s):  
Dumitru I. Caruntu ◽  
Israel Martinez
Keyword(s):  
Natural Frequency ◽  
Nonlinear Response ◽  
Multiple Scales ◽  
Method Of Multiple Scales ◽  
Electrostatic Force ◽  
Reduced Order Model ◽  
Order Model ◽  
Reduced Order ◽  
First Order ◽  
Electrostatically Actuated

The nonlinear response of an electrostatically actuated cantilever beam microresonator is investigated. The AC voltage is of frequency near resonator’s natural frequency. A first order fringe correction of the electrostatic force and viscous damping are included in the model. The dynamics of the resonator is investigated using the Reduced Order Model (ROM) method, based on Galerkin procedure. Steady-state motions are found. Numerical results for the uniform microresonator are compared with those obtained via the Method of Multiple Scales (MMS).

On Electrostatically Actuated CNT Bio-Sensors

2011 ◽  
Author(s):  
Dumitru I. Caruntu ◽  
Cone S. Salinas Trevino
Keyword(s):  
Carbon Nanotubes ◽  
Multiple Scales ◽  
Method Of Multiple Scales ◽  
Van Der Waals ◽  
Primary Resonance ◽  
Mass Detection ◽  
Electrostatically Actuated ◽  
Sensing Applications ◽  
Ground Plate ◽  
Frequency Phase

This paper deals with electrostatically actuated Carbon NanoTubes (CNT) cantilevers for bio-sensing applications. There are three kinds of forces acting on the CNT cantilever: electrostatic, elastostatic, and van der Waals. The van der Waals forces are significant for values of 50 nm or lower of the gap between the CNT and the ground plate. As both forces electrostatic and van der Waals are nonlinear, and the CNT electrostatic actuation is given by AC voltage, the CNT dynamics is nonlinear parametric. The method of multiple scales is used to investigate the system under soft excitations and/or weakly nonlinearities. The frequency-amplitude and frequency-phase behavior are found in the case of primary resonance. The CNT bio-sensor is to be used for mass detection applications.

Casimir and Van der Waals Effects on Voltage Response of Electrostatically Actuated MEMS/NEMS Plates

2015 ◽  
Author(s):  
Dumitru I. Caruntu ◽  
Reynaldo Oyervides ◽  
Valeria Garcia
Keyword(s):  
Natural Frequency ◽  
Parametric Resonance ◽  
Electrostatic Force ◽  
Van Der Waals ◽  
Van Der Waals Forces ◽  
Voltage Response ◽  
Voltage Amplitude ◽  
Amplitude Response ◽  
Electrostatically Actuated ◽  
Ground Plate

This paper deals with electrostatically actuated MEMS plates. The model consists of a flexible MEMS plate above a parallel ground plate. An AC voltage of frequency near natural frequency of the plate provides the electrostatic force that actuates the flexible MEMS plate. This leads to parametric resonance. The effect of Casimir and/or van der Waals forces on the voltage-amplitude response of the plate is investigated.

Sensitivity of MEMS/NEMS Biosensors Near Twice Natural Frequency

2010 ◽  
Author(s):  
Dumitru I. Caruntu ◽  
Martin W. Knecht
Keyword(s):  
Natural Frequency ◽  
Multiple Scales ◽  
Method Of Multiple Scales ◽  
Casimir Effect ◽  
Electrostatic Force ◽  
Equation Of Motion ◽  
Direct Approach ◽  
Mass Detection ◽  
Electrostatically Actuated ◽  
Phase Amplitude

Bio-MEMS/NEMS resonator sensors near twice natural frequency for mass detection are investigated. Electrostatic force along with fringe correction and Casimir effect are included in the model. They introduce parametric nonlinear terms in the system. The partial-differential equation of motion of the system is solved by using the method of multiple scales. A direct approach of the problem is then used. Two approximation problems resulting from the direct approach are solved. Phase-amplitude relationship is obtained. Numerical results for uniform electrostatically actuated micro resonator sensors are reported.

Reduced Order Model of Parametric Resonance of Electrostatically Actuated CNT Cantilever Resonators

2013 ◽  
Author(s):  
Dumitru I. Caruntu ◽  
Le Luo
Keyword(s):  
Parametric Resonance ◽  
Multiple Scales ◽  
Van Der Waals ◽  
Reduced Order Model ◽  
Order Model ◽  
Reduced Order ◽  
Electrostatically Actuated ◽  
Carbon Nano Tubes ◽  
Ground Plate ◽  
Phase Behaviors

This paper deals with electrostatically actuated Carbon Nano-Tubes (CNT) cantilevers using Reduced Order Model (ROM) method. Forces acting on the CNT cantilever are electrostatic, van der Waals, and damping. The van der Waals forces are significant for values of 50 nm or lower of the gap between the CNT and the ground plate. As both forces electrostatic and van der Waals are nonlinear, and the CNT electrostatic actuation is given by AC voltage, the CNT undergoes nonlinear parametric dynamics. The Method of Multiple Scales (MMS), and ROM are used to investigate the system under soft excitations and/or weak nonlinearities. The frequency-amplitude and frequency-phase behaviors are found in the case of parametric resonance.

Sign in / Sign up

Export Citation Format

Share Document