USE OF THE FAN-SHAPED IDTS – EFFICIENT METHOD FOR CREATING THE WIDEBAND SAW FILTERS WITH A LOW INSERTION LOSS AND HIGH RECTANGULARITY OF FREQUENCY RESPONSE

This paper presents an efficient method for creating the wideband SAW filters with high rectangularity, flat amplitude response and low insertion loss in passband – use of fan-shaped IDTs with inclined electrodes. The authors consider the approaches for realization of the fan-shaped filters. The quantitative and qualitative characteristics of the fan-shaped SAW filters with a relative bandwidth ∆f/f0 = 4–75 %, shape factor 1,1–1,96 and insertion loss of 5–18 dB are given for each approach.

Nonlinear Vibration and Stability Analysis of Functionally Graded Nanobeam Subjected to External Parametric Excitation and Thermal Load

Analysis of vibration stability of simply supported Euler-Bernoulli functionally graded (FG) nanobeam embedded in viscous elastic medium with thermal effect under external parametric excitation is presented in this work. An attempt has been made for the first time is investigating the effect of thermal load on dynamic behavior, amplitude response, instability region and bifurcation points of functionally graded nanobeam. Thermal loads are supposed to be uniform, linear or nonlinear distribution along the thickness direction. Nonlocal continuum theory and the principle of the minimum total potential energy are applied to derive the governing equations. The partial differential equations (PDE) are transported to the ordinary differential equations (ODE) by using the Petrov-Galerkin method and the multiple time scales method are manipulated to solve the motion equation. To study the effect of external parametric excitation and thermal effect, different temperature distributions along the thickness such as uniform, linear, and nonlinear distribution are considered. Moreover, stable and unstable regions and bifurcation points are determined. It is obtained that the thermal load can affect the amplitude response of FG nanobeam. Also, it is observed that the instability of the system is affected by the detuning parameter and the parametric excitation amplitude plays great role in the instability of system. Nanobeams are used in many devices like nanoresonators, nanosensors and nanoswitches. This paper is helpful for designing and manufacturing nanoscale structures specially nanoresonators under different thermal loads.

Investigation of the Scruton Number Effects of Wind-Induced Unsteady Galloping Responses of Bridge Suspenders

When the critical wind speed of vortex-induced resonance is close to that of quasi-steady galloping, a type of coupled wind-induced vibration that is different from divergent galloping can easily occur in a rectangular bar. It is a type of “unsteady galloping” phenomenon wherein the response amplitude increases linearly with the increase in the wind speed, while a limit cycle oscillation is observed at each wind speed, whose mechanism is still in research. Mass and damping are the key parameters that affect the coupling degree and amplitude response estimation. For a set of rectangular section member models with a width-to-height ratio of 1.2, by adjusting the equivalent stiffness, equivalent mass, and damping ratio of the model system and performing comparative tests on the wind-induced vibration response of the same mass with different damping ratios, it is possible to achieve the same damping ratio with different masses and the same Scruton number with different masses and damping combinations under the same Reynolds number. The results show that the influence of the mass and damping parameters on the “unsteady galloping” amplitude response is independent, and the weight is the same in the coupling state. The Scruton number “locked interval” (12.4–30.6) can be found in the “unsteady galloping” amplitude response, and the linear slope of the dimensionless wind speed amplitude response curve does not change with the Scruton number in the “locked interval.” In addition, a “transition interval” (26.8–30.6) coexists with the “locked interval” wherein the coupling state of the wind-induced vibration is converted into the uncoupled state. The empirical formula for estimating the “unsteady galloping” response amplitude is modified and can be used to predict the amplitude within the design wind speed range of similar engineering members.

Time-Domain Dynamic Characteristics Analysis and Experimental Research of Tri-Stable Piezoelectric Energy Harvester

In order to explore the dynamic characteristics of the linear-arch beam tri-stable piezoelectric energy harvester (TPEH), a magnetic force model was established by the magnetic dipole method, and the linear-arch composite beam nonlinear restoring force model was obtained through experiments. Based on the Euler–Bernoulli beam theory, a system dynamic model is established, and the influence of the horizontal distance, vertical distance and excitation acceleration of magnets on the dynamic characteristics of the system is simulated and analyzed. Moreover, the correctness of the theoretical results is verified by experiments. The results show that the system can be mono-stable, bi-stable and tri-stable by adjusting the horizontal or vertical spacing of the magnets under proper excitation. The potential well of the system in the tri-stable state is shallow, and it is easier to achieve a large-amplitude response. Increasing the excitation level is beneficial for the large-amplitude response of the system. This study provides theoretical guidance for the design of linear-arch beam TPEH.

Electromechanical Characteristics of Core Free Folded Dielectric Electro-active Polymer Soft Actuator

This paper investigates the active dynamic and electromechanical characteristics of a new thin folded dielectric electro-active polymer actuator developed by Danfoss PolyPower. The high voltage is supplied to the actuator during dynamic testing to identified the effect of the electrical field on dynamic characteristics. The electromechanical characteristics are investigated by varying the amplitude and frequency of the voltage supplied. The experimental results, such as natural frequency, amplitude response, and loss factor are presented to show the influence of such an electrical field on the characteristic of the actuator. There is a reduction of resonance frequency from 14 Hz to 12 Hz as voltage supply up to 2000 V. The actuating response of the actuator was subjected more to frequency rather than the amplitude of the voltage supplied. Hence, the results may guide the exploration of a new folded thin actuator as an active vibration controller.