A Computational Study of Catalytic Platinum Nanoparticles With and Without OH Chemisorption During Reactions

2008 ◽  
Author(s):  
Mikhail Sekachev ◽  
Cheng-Xian Lin ◽  
Zhiyu Hu ◽  
Don Dareing
Keyword(s):  
Binding Energy ◽  
Total Energy ◽  
Platinum Nanoparticles ◽  
Cluster Size ◽  
Density Functional ◽  
Energy Gap ◽  
Computational Study ◽  
Basis Set ◽  
Functional Theory ◽  
The Stability

In this paper, various energies and geometries of pure platinum nanoparticles and those of platinum nanoparticles with adsorbed OH were investigated. Ten different platinum clusters of up to 28 atoms were studied using spin-unrestricted density functional theory (DFT) with a double numerical plus polarization basis set. Three different shapes were presented, and the effect of cluster size on binding energy, total energy, and HOMO-LUMO energy gap was investigated. The same set of calculations was performed for selected clusters with OH adsorbate on the Pt(111) surface. The results show that the stability of both the pure clusters and the clusters with adsorbed OH molecule increases with an increase of cluster size. This fact indicates that direct influence of the size of Pt cluster on the reaction rate is possible, and the understanding of how cluster size would affect binding energy is important. The effect of cluster size on total energy of molecule was shown to be a linear function independent of cluster type, as expected. We also found that optimized (stable) Pt clusters were bigger in size than that of the initial clusters, or clusters with bulk geometry.

Site preference and atomic ordering in the ternary Rh5Ga2As: first-principles calculations

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Nilanjan Roy ◽  
Sucharita Giri ◽  
Harshit ◽  
Partha P. Jana
Keyword(s):  
Total Energy ◽  
First Principles ◽  
Density Functional ◽  
Structure Type ◽  
Site Preference ◽  
X Ray Diffraction ◽  
Atomic Ordering ◽  
Functional Theory ◽  
The Stability ◽  
Bonding Characteristics

Abstract The site preference and atomic ordering of the ternary Rh5Ga2As have been investigated using first-principles density functional theory (DFT). An interesting atomic ordering of two neighboring elements Ga and As reported in the structure of Rh5Ga2As by X-ray diffraction data only is confirmed by first-principles total-energy calculations. The previously reported experimental model with Ga/As ordering is indeed the most stable in the structure of Rh5Ga2As. The calculation detected that there is an obvious trend concerning the influence of the heteroatomic Rh–Ga/As contacts on the calculated total energy. Interestingly, the orderly distribution of As and Ga that is found in the binary GaAs (Zinc-blende structure type), retained to ternary Rh5Ga2As. The density of states (DOS) and Crystal Orbital Hamiltonian Population (COHP) are calculated to enlighten the stability and bonding characteristics in the structure of Rh5Ga2As. The bonding analysis also confirms that Rh–Ga/As short contacts are the major driving force towards the overall stability of the compound.

scholarly journals Density Functional Theory and Complete Basis Set Ab Initio Computational Study of Five-, Six-, Seven- and Eight-hydrogen Coordinated Carbon Cations

1999 ◽  
Vol 23 (8) ◽  
pp. 502-503
Author(s):  
Branko S. Jursic
Keyword(s):  
Density Functional Theory ◽  
Ab Initio ◽  
Density Functional ◽  
Computational Study ◽  
Basis Set ◽  
Functional Theory ◽  
Complete Basis ◽  
Complete Basis Set ◽  
High Level

High level ab initio and density functional theory studies are performed on highly protonated methane species.

Computational study of polarizability anisotropies

2018 ◽  
Vol 96 (10) ◽  
pp. 934-938
Author(s):  
Delano P. Chong
Keyword(s):  
Small Molecules ◽  
Density Functional ◽  
Computational Study ◽  
Chem Phys ◽  
Basis Set ◽  
Functional Theory ◽  
Exchange Correlation ◽  
Exchange Correlation Potential ◽  
Correlation Potential ◽  
Definition Of

The dipole polarizabilities (α) and polarizability anisotropies (Δα) of over 20 molecules are calculated to search for negative Δα. The geometry of each molecule is first optimized at the level of CCSD(T)/cc-pVQZ. Then, the α tensors are computed both with CCSD(T)/daug-cc-pVTZ in Gaussian 09 and with the exchange-correlation potential Vxc known as SAOP in the Amsterdam density functional theory program called ADF and a large basis set called QZ3P-3DIFFUSE. In addition to the popular formula of the ΔαRaman connected with Raman spectroscopy, we also present values of an alternative definition of the polarizability anisotropy ΔαKerr connected with Kerr spectroscopy, recently proposed by Kampfrath and colleagues (2018. Chem. Phys. Lett. 692: 319). On one hand, the signs of many ΔαRaman are undetermined; on the other hand, we obtain negative ΔαKerr for more than one-half of the small molecules studied. Of the 24 molecules studied, 18 have negative ΔαKerr.

Computational Study of Tetrahedral Fullerenes Containing Fused Pentagon-Triples

2021 ◽  
Vol 21 (4) ◽  
pp. 2419-2426
Author(s):  
Csaba L. Nagy ◽  
Katalin Nagy
Keyword(s):  
Density Functional ◽  
Computational Study ◽  
Chemical Shifts ◽  
Point Group ◽  
Functional Theory ◽  
Global Strain ◽  
The Stability ◽  
Global And Local ◽  
Hybrid Density Functional ◽  
Electronic And Structural Properties

Fullerenes that violate the isolated pentagon rule are too reactive and were obtained only as endoor exohedral derivatives. Density functional theory using the B3LYP hybrid density functional was applied to investigate the electronic and structural properties of the ten smallest tetrahedral (Td or T point group) fullerenes containing four directly fused pentagon-triples. The influence of nitrogen doping and exohedral hydrogenation of the four reactive sites was also analyzed. Nucleus independent chemical shifts values computed using B3LYP/6-31G(d) are used as global and local aromaticity probe. The global strain energy is evaluated in terms of the pyramidalization (POAV) angle. The results show that the stability increases with the elimination of the energetically unfavorable strain.

SOLVENT EFFECTS ON THE ELECTRONIC STRUCTURE AND NON-LINEAR OPTICAL PROPERTIES OF PYRENE AND SOME OF ITS DERIVATIVES BASED ON DENSITY FUNCTIONAL THEORY

2021 ◽  
Vol 4 (4) ◽  
pp. 236-251
Author(s):  
A. S. Gidado ◽  
L. S. Taura ◽  
A. Musa
Keyword(s):  
Density Functional Theory ◽  
Gas Phase ◽  
Density Functional ◽  
Energy Gap ◽  
Chemical Reactivity ◽  
Basis Set ◽  
Lumo Energy ◽  
Functional Theory ◽  
Organic Optoelectronic ◽  
Homo Lumo

Pyrene (C16H10) is an organic semiconductor which has wide applications in the field of organic electronics suitable for the development of organic light emitting diodes (OLED) and organic photovoltaic cells (OPV). In this work, Density Functional Theory (DFT) using Becke’s three and Lee Yang Parr (B3LYP) functional with basis set 6-311++G(d, p) implemented in Gaussian 03 package was  used to compute total energy, bond parameters, HOMO-LUMO energy gap, electron affinity, ionization potential, chemical reactivity descriptors, dipole moment, isotropic polarizability (α), anisotropy of polarizability ( Δ∝) total first order hyper-polarizability () and second order hyperpolarizability (). The molecules used are pyrene, 1-chloropyrene and 4-chloropyrene  in gas phase and in five different solvents: benzene, chloroform, acetone, DMSO and water. The results obtained show that solvents and chlorination actually influenced the properties of the molecules. The isolated pyrene in acetone has the largest value of HOMO-LUMO energy gap of and is a bit closer to a previously reported experimental value of  and hence is the most stable. Thus, the pyrene molecule has more kinetic stability and can be described as low reactive molecule. The calculated dipole moments are in the order of 4-chloropyrene (1.7645 D) < 1-chloropyrene (1.9663 D) in gas phase. The anisotropy of polarizability ( for pyrene and its derivatives were found to increase with increasing polarity of the solvents.  In a nutshell, the molecules will be promising for organic optoelectronic devices based on their computed properties as reported by this work.

scholarly journals Substitution Effects on the Optoelectronic Properties of Coumarin Derivatives

2019 ◽  
Vol 10 (1) ◽  
pp. 144
Author(s):  
Amit Kumar ◽  
Roberto Baccoli ◽  
Antonella Fais ◽  
Alberto Cincotti ◽  
Luca Pilia ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Binding Energy ◽  
Molecular Orbital ◽  
Density Functional ◽  
Optoelectronic Properties ◽  
Exciton Binding Energy ◽  
Basis Set ◽  
Substitution Effects ◽  
Coumarin Derivatives ◽  
Functional Theory

Coumarin derivatives have gathered major attention largely due to their versatile utility in a wide range of applications. In this framework, we report a comparative computational investigation on the optoelectronic properties of 3-phenylcoumarin and 3-heteroarylcoumarin derivatives established as enzyme inhibitors. Specifically, we concentrate on the variation in the optoelectronic characteristics for the hydroxyl group substitutions within the coumarin moiety. In order to realize our aims, all-electron density functional theory and time dependent density functional theory calculations were performed with a localized Gaussian basis-set matched with a hybrid exchange–correlation functionals. Molecular properties such as highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) energies, vertical ionization (IEV) and electron affinity energies, absorption spectra, quasi-particle gap, and exciton binding energy values are examined. Furthermore, the influence of solvent on the optical properties of the molecules is considered. We found a good agreement between the experimental (8.72 eV) and calculated (8.71 eV) IEV energy values for coumarin. The computed exciton binding energy of the investigated molecules indicated their potential optoelectronics application.

scholarly journals Theoretical Study of a Class of Organic D-π-A Dyes for Polymer Solar Cells: Influence of Various π-Spacers

Crystals ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 163
Author(s):  
Nguyen Van Trang ◽  
Tran Ngoc Dung ◽  
Ngo Tuan Cuong ◽  
Le Thi Hong Hai ◽  
Daniel Escudero ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Solar Cells ◽  
Molecular Orbital ◽  
Density Functional ◽  
Energy Gap ◽  
Polymer Solar Cells ◽  
Basis Set ◽  
Structure Theory ◽  
Functional Theory ◽  
Alkyl Groups

A class of D-π-A compounds that can be used as dyes for applications in polymer solar cells has theoretically been designed and studied, on the basis of the dyes recently shown by experiment to have the highest power conversion efficiency (PCE), namely the poly[4,8-bis(5-(2-butylhexylthio)thiophen-2-yl)benzo[1,2-b:4,5-b’]dithiophene-2,6-diyl-alt-TZNT] (PBDTS-TZNT) and poly[4,8-bis(4-fluoro-5-(2-butylhexylthio)thiophen-2-yl)benzo[1,2-b:4,5-b’]dithiophene-2,6-diyl-alt-TZNT] (PBDTSF-TZNT) substances. Electronic structure theory computations were carried out with density functional theory and time-dependent density functional theory methods in conjunction with the 6−311G (d, p) basis set. The PBDTS donor and the TZNT (naphtho[1,2-c:5,6-c]bis(2-octyl-[1,2,3]triazole)) acceptor components were established from the original substances upon replacement of long alkyl groups within the thiophene and azole rings with methyl groups. In particular, the effects of several π-spacers were investigated. The calculated results confirmed that dithieno[3,2-b:2′,3′-d] silole (DTS) acts as an excellent π-linker, even better than the thiophene bridge in the original substances in terms of well-known criteria. Indeed, a PBDTS-DTS-TZNT combination forms a D-π-A substance that has a flatter structure, more rigidity in going from the neutral to the cationic form, and a better conjugation than the original compounds. The highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) energy gap of such a D-π-A substance becomes smaller and its absorption spectrum is more intense and red-shifted, which enhances the intramolecular charge transfer and makes it a promising candidate to attain higher PCEs.

STRUCTURAL AND ELECTRONIC PROPERTIES OF FINITE-LENGTH SINGLE-WALLED CARBON AND SILICON CARBIDE NANOTUBES: DFT STUDY

2013 ◽  
Vol 27 (29) ◽  
pp. 1350210 ◽  
Author(s):  
IGOR K. PETRUSHENKO ◽  
NIKOLAY A. IVANOV
Keyword(s):  
Silicon Carbide ◽  
Electronic Properties ◽  
Density Functional ◽  
Energy Gap ◽  
Basis Set ◽  
Functional Theory ◽  
Single Walled Carbon ◽  
Silicon Carbide Nanotubes ◽  
Structural And Electronic Properties ◽  
Walled Carbon Nanotubes

This paper presents a systematical analysis of the structure and electronic properties of armchair single-walled carbon nanotubes (SWCNTs) as well as single-walled silicon carbide nanotubes ( SiCNTs ) by using density functional theory. The geometries of all species were optimized at the B3LYP level of theory using the SVP basis set. The different behavior of C – C bonds "parallel" and "perpendicular" to the nanotube axis has been found. The HOMO–LUMO energy gap, ionization potential, electron affinity, electronegativity and hardness of studied tubes were compared. The influence of both SWCNTs and SiCNTs lengths on their electronic properties has been analyzed.

Homolytic bond-dissociation enthalpies of tin bonds and tin–ligand bond strengths — A computational study

2009 ◽  
Vol 87 (7) ◽  
pp. 974-983 ◽  
Author(s):  
Sarah R. Whittleton ◽  
Russell J. Boyd ◽  
T. Bruce Grindley
Keyword(s):  
Density Functional ◽  
Computational Study ◽  
Basis Set ◽  
Functional Theory ◽  
Bond Dissociation ◽  
Donor Acceptor ◽  
Bond Strengths ◽  
Moller Plesset ◽  
Effective Core Potentials ◽  
Ligand Bond

Density functional theory and second-order Møller–Plesset perturbation theory with effective core potentials have been used to calculate homolytic bond-dissociation enthalpies, D(Sn–X), of organotin compounds, and their performance has been assessed by comparison with available experimental bond enthalpies. The SDB-aug-cc-pVTZ basis set with its effective core potential was used to calculate the D(Sn–X) of a series of trimethyltin(IV) species, Me3Sn–X, where X = H, CH3, CH2CH3, NH2, OH, Cl, and F. This is the most comprehensive report to date of homolytic Sn–X bond-dissociation enthalpies (BDEs). Effective core potentials are then used to calculate thermodynamic parameters including donor–acceptor bond enthalpies, [Formula: see text], for a series of tin-ligand complexes, L2SnX4 (X = Br or Cl, L = py, dmf, or dmtf), which are compared with previous experimental and nonrelativistic computational results. Based on computational efficiency and accuracy, it is concluded that effective core potentials are appropriate computational methods to examine bonding in organotin systems.

Sign in / Sign up

Export Citation Format

Share Document