Aeroacoustic Computations of Contra-Rotating Open Rotors Using the Nonlinear Harmonic Method and a Chorochronic Approach

2012 ◽  
Author(s):  
P.-A. Hoffer ◽  
T. Deconinck ◽  
Ch. Hirsch ◽  
B. Ortun ◽  
S. Canard-Caruana ◽  
...  
Keyword(s):  
High Efficiency ◽  
Near Field ◽  
Three Dimensional ◽  
Flow Simulation ◽  
Acoustic Propagation ◽  
Propulsion System ◽  
Scale Model ◽  
Far Field ◽  
Noise Sources ◽  
Harmonic Method

Due to their great potential for fuel saving, Contra-Rotating Open Rotors (CRORs) receive renewed interest by the airframers and the engine manufacturers. The inherent high efficiency of this propulsion system, however, is potentially offset by the level of noise emitted by the open blades. The acoustic impact on passengers and community may represent a major issue to their environmental acceptance. Fast and robust noise prediction tools are clearly required to support the development of quieter propellers and their integration in future civil aeronautical transport. The most common strategy for noise estimation consists in a two-step approach, based on the Lighthill analogy: unsteady near-field aerodynamic flow simulation to evaluate the noise sources, coupled to a far-field acoustic propagation code. Focus is given here on two structured grid flow solvers employed to investigate a scale-model of a 12×10 pusher CROR. The unsteady aerodynamic three-dimensional flow is indeed computed for typical cruise conditions using both the nonlinear harmonic method (NLH) of FINE™/Turbo software and elsA’s chorochronic technique. The evaluation of the far-field noise based on the aerodynamic fields is then carried out with the KIM code, Onera’s acoustic propagation code based on the Ffowcs-Williams and Hawkings (FW-H) formulation. The obtained results enable an analysis of the complex aerodynamic interactions between the two propellers that generate interaction tones in the acoustic signature of the propulsion system. A comparison in terms of numerical settings, computational costs and flow fields is performed between the two CFD methods, which show an excellent match of the predicted global performance of the propulsion system. Some differences in the predicted acoustic signatures are discussed in the paper.

WAVELET-BASED POSTPROCESSING OF JET LES DATA FOR ACOUSTIC FAR-FIELD EXTRAPOLATIONS

2013 ◽  
Vol 21 (04) ◽  
pp. 1350017
Author(s):  
RAMIN KAVIANI ◽  
VAHID ESFAHANIAN ◽  
MOHAMMAD EBRAHIMI
Keyword(s):  
Large Scale ◽  
Stokes Equations ◽  
Near Field ◽  
Flow Simulation ◽  
Computational Time ◽  
Jet Flows ◽  
Small Scale ◽  
Frequency Noise ◽  
Far Field ◽  
Noise Sources

The affordable grid resolutions in conventional large-eddy simulations (LESs) of high Reynolds jet flows are unable to capture the sound generated by fluid motions near and beyond the grid cut-off scale. As a result, the frequency spectrum of the extrapolated sound field is artificially truncated at high frequencies. In this paper, a new method is proposed to account for the high frequency noise sources beyond the resolution of a compressible flow simulation. The large-scale turbulent structures as dominant radiators of sound are captured in LES, satisfying filtered Navier–Stokes equations, while for small-scale turbulence, a Kolmogorov's turbulence spectrum is imposed. The latter is performed via a wavelet-based extrapolation to add randomly generated small-scale noise sources to the LES near-field data. Further, the vorticity and instability waves are filtered out via a passive wavelet-based masking and the whole spectrum of filtered data are captured on a Ffowcs-Williams/Hawkings (FW-H) surface surrounding the near-field region and are projected to acoustic far-field. The algorithm can be implemented as a separate postprocessing stage and it is observed that the computational time is considerably reduced utilizing a hybrid of many-core and multi-core framework, i.e. MPI-CUDA programming. The comparison of the results obtained from this procedure and those from experiments for high subsonic and transonic jets, shows that the far-field noise spectrum agree well up to 2 times of the grid cut-off frequency.

scholarly journals Flow-Induced Vibration on the Control Valve with a Different Concave Plug Shape Using FSI Simulation

2019 ◽  
Vol 2019 ◽  
pp. 1-14
Author(s):  
Akram Zeid ◽  
Mohamed Shouman
Keyword(s):  
High Efficiency ◽  
Complex Structure ◽  
Three Dimensional ◽  
Flow Characteristics ◽  
Flow Simulation ◽  
Control Valve ◽  
Low Noise ◽  
Flow Induced Vibration ◽  
Nonlinear Characteristics ◽  
Flow Phenomena

Control valves have always been recognised as being among the most crucial control equipment, commonly utilised in versatile engineering applications. Hence, the need has arisen to identify the flow characteristics inside the valve, together with the incurred vibration induced as a result of the flow passing through the valve. Thanks to the tangible and fast progress made in the field of the flow simulation and numerical techniques, it has become possible to better observe the behavior of the flow passing inside a valve with view to examining its performance. Hence, the paper at hand is mainly concerned with introducing the modeling and simulation of a control valve. On the contrary, the flow system in a control valve is marked by a complex structure and nonlinear characteristics. The reasons for those qualities could be attributed to its construction as well as the fluid flow phenomena associated with it. It is especially for the sake of investigating and observing the flow characteristics, pertaining to a control valve equipped with different concave plug shapes and different openings, that the three-dimensional FSI simulation is conducted. In addition, it would be possible to make use of the obtained results relating to the three-dimensional analysis to achieve low noise and high efficiency improvement. Furthermore, all results will be validated on experimental grounds.

Theoretical and experimental studies of three-dimensional wavemaking in narrow tanks, including nonlinear phenomena near resonance

1994 ◽  
Vol 276 ◽  
pp. 211-232 ◽  
Author(s):  
Yitao Yao ◽  
Marshall P. Tulin ◽  
Ali R. Kolaini
Keyword(s):  
Nonlinear Wave ◽  
Near Field ◽  
Experimental Studies ◽  
Three Dimensional ◽  
Analytical Techniques ◽  
Nonlinear Phenomena ◽  
Far Field ◽  
Wave Groups ◽  
Near Resonance ◽  
Matching Techniques

In view of several practical ramifications of this problem, computational-analytical techniques for calculating waves induced by heaving arbitrary bodies in narrow tanks have been developed, including nonlinear wave groups produced near tank resonance. These feature computational near-field solutions matched with appropriate far-field solutions. In the linear case, the far field is provided by linear mode superposition. In the nonlinear case, the far field is described by a suitable nonlinear evolution equation of the cubic Schrödinger type. Matching techniques were developed. Calculations were successfully carried out and the results confirm the important effect of tank walls on added mass and damping.Results of computations have been compared with some data obtained with a conical wavemaker in a narrow tank. Pronounced nonlinear wave groups were obtained near resonance, and these are well reproduced in some detail by the nonlinear theory and computations, without considering any effects of dissipation.The related problem of resonant wave groups produced by a segmented paddle wavemaker has also been treated by analysis and subject to computation, with good general agreement with past experiments. The technique features matching near- and far-field computations using energy considerations.

scholarly journals Femtosecond Laser Precision Engineering: From Micron, Submicron, to Nanoscale

2021 ◽  
Vol 2021 ◽  
pp. 1-22
Author(s):  
Zhenyuan Lin ◽  
Minghui Hong
Keyword(s):  
Femtosecond Laser ◽  
High Efficiency ◽  
Near Field ◽  
Ambient Air ◽  
Optical Microscope ◽  
Far Field ◽  
Large Area ◽  
Precision Engineering ◽  
Processing Strategies ◽  
Near Field Effect

As a noncontact strategy with flexible tools and high efficiency, laser precision engineering is a significant advanced processing way for high-quality micro-/nanostructure fabrication, especially to achieve novel functional photoelectric structures and devices. For the microscale creation, several femtosecond laser fabrication methods, including multiphoton absorption, laser-induced plasma-assisted ablation, and incubation effect have been developed. Meanwhile, the femtosecond laser can be combined with microlens arrays and interference lithography techniques to achieve the structures in submicron scales. Down to nanoscale feature sizes, advanced processing strategies, such as near-field scanning optical microscope, atomic force microscope, and microsphere, are applied in femtosecond laser processing and the minimum nanostructure creation has been pushed down to ~25 nm due to near-field effect. The most fascinating femtosecond laser precision engineering is the possibility of large-area, high-throughput, and far-field nanofabrication. In combination with special strategies, including dual femtosecond laser beam irradiation, ~15 nm nanostructuring can be achieved directly on silicon surfaces in far field and in ambient air. The challenges and perspectives in the femtosecond laser precision engineering are also discussed.

scholarly journals Roughness effect on the efficiency of dimer antenna based biosensor

2012 ◽  
Vol 1 (2) ◽  
pp. 41 ◽  
Author(s):  
D. Barchiesi ◽  
S. Kessentini
Keyword(s):  
Surface Roughness ◽  
Near Field ◽  
Three Dimensional ◽  
Biological Molecules ◽  
Far Field ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Roughness Effect ◽  
Highly Sensitive ◽  
Local Plasmon

The fabrication process of nanodevices is continually improved. However, most of the nanodevices, such as biosensors present rough surfaces with mean roughness of some nanometers even if the deposition rate of material is more controlled. The effect of roughness on performance of biosensors was fully addressed for plane biosensors and gratings, but rarely addressed for biosensors based on Local Plasmon Resonance. The purpose of this paper is to evaluate numerically the influence of nanometric roughness on the efficiency of a dimer nano-biosensor (two levels of roughness are considered). Therefore, we propose a general numerical method, that can be applied to any other nanometric shape, to take into account the roughness in a three dimensional model. The study focuses on both the far-field, which corresponds to the experimental detected data, and the near-field, responsible for exciting and then detecting biological molecules. The results suggest that the biosensor efficiency is highly sensitive to the surface roughness. The roughness can produce important shifts of the extinction efficiency peak and a decrease of its amplitude resulting from changes in the distribution of near-field and absorbed electric field intensities.

Sign in / Sign up

Export Citation Format

Share Document