Measurements of three-dimensional acoustic propagation in a scale-model canyon

2015 ◽  
Vol 137 (4) ◽  
pp. 2391-2391
Author(s):  
Jason D. Sagers
Keyword(s):  
Three Dimensional ◽  
Acoustic Propagation ◽  
Scale Model

Aeroacoustic Computations of Contra-Rotating Open Rotors Using the Nonlinear Harmonic Method and a Chorochronic Approach

2012 ◽  
Author(s):  
P.-A. Hoffer ◽  
T. Deconinck ◽  
Ch. Hirsch ◽  
B. Ortun ◽  
S. Canard-Caruana ◽  
...  
Keyword(s):  
High Efficiency ◽  
Near Field ◽  
Three Dimensional ◽  
Flow Simulation ◽  
Acoustic Propagation ◽  
Propulsion System ◽  
Scale Model ◽  
Far Field ◽  
Noise Sources ◽  
Harmonic Method

Due to their great potential for fuel saving, Contra-Rotating Open Rotors (CRORs) receive renewed interest by the airframers and the engine manufacturers. The inherent high efficiency of this propulsion system, however, is potentially offset by the level of noise emitted by the open blades. The acoustic impact on passengers and community may represent a major issue to their environmental acceptance. Fast and robust noise prediction tools are clearly required to support the development of quieter propellers and their integration in future civil aeronautical transport. The most common strategy for noise estimation consists in a two-step approach, based on the Lighthill analogy: unsteady near-field aerodynamic flow simulation to evaluate the noise sources, coupled to a far-field acoustic propagation code. Focus is given here on two structured grid flow solvers employed to investigate a scale-model of a 12×10 pusher CROR. The unsteady aerodynamic three-dimensional flow is indeed computed for typical cruise conditions using both the nonlinear harmonic method (NLH) of FINE™/Turbo software and elsA’s chorochronic technique. The evaluation of the far-field noise based on the aerodynamic fields is then carried out with the KIM code, Onera’s acoustic propagation code based on the Ffowcs-Williams and Hawkings (FW-H) formulation. The obtained results enable an analysis of the complex aerodynamic interactions between the two propellers that generate interaction tones in the acoustic signature of the propulsion system. A comparison in terms of numerical settings, computational costs and flow fields is performed between the two CFD methods, which show an excellent match of the predicted global performance of the propulsion system. Some differences in the predicted acoustic signatures are discussed in the paper.

Three-dimensional Reconstruction of Microscopic Image Based on Multi-ST Algorithm

2020 ◽  
Vol 64 (2) ◽  
pp. 20506-1-20506-7
Author(s):  
Min Zhu ◽  
Rongfu Zhang ◽  
Pei Ma ◽  
Xuedian Zhang ◽  
Qi Guo
Keyword(s):  
3D Reconstruction ◽  
Three Dimensional ◽  
Scale Model ◽  
Microscopic Image ◽  
Multi Scale ◽  
Gaussian Pyramid ◽  
Cost Aggregation ◽  
Dimensional Reconstruction ◽  
Image Pairs ◽  
Accurate Matching

Abstract Three-dimensional (3D) reconstruction is extensively used in microscopic applications. Reducing excessive error points and achieving accurate matching of weak texture regions have been the classical challenges for 3D microscopic vision. A Multi-ST algorithm was proposed to improve matching accuracy. The process is performed in two main stages: scaled microscopic images and regularized cost aggregation. First, microscopic image pairs with different scales were extracted according to the Gaussian pyramid criterion. Second, a novel cost aggregation approach based on the regularized multi-scale model was implemented into all scales to obtain the final cost. To evaluate the performances of the proposed Multi-ST algorithm and compare different algorithms, seven groups of images from the Middlebury dataset and four groups of experimental images obtained by a binocular microscopic system were analyzed. Disparity maps and reconstruction maps generated by the proposed approach contained more information and fewer outliers or artifacts. Furthermore, 3D reconstruction of the plug gauges using the Multi-ST algorithm showed that the error was less than 0.025 mm.

Modeling and Assessment of the Produced Water Discharges from Offshore Petroleum Platforms

2007 ◽  
Vol 42 (4) ◽  
pp. 303-310 ◽  
Author(s):  
Zhi Chen ◽  
Lin Zhao ◽  
Kenneth Lee ◽  
Charles Hannath
Keyword(s):  
Random Walk ◽  
Produced Water ◽  
Model Development ◽  
Three Dimensional ◽  
Monitoring Program ◽  
Ecological Monitoring ◽  
Numerical Approach ◽  
Ocean Model ◽  
Scale Model ◽  
Water Stream

Abstract There has been a growing interest in assessing the risks to the marine environment from produced water discharges. This study describes the development of a numerical approach, POM-RW, based on an integration of the Princeton Ocean Model (POM) and a Random Walk (RW) simulation of pollutant transport. Specifically, the POM is employed to simulate local ocean currents. It provides three-dimensional hydrodynamic input to a Random Walk model focused on the dispersion of toxic components within the produced water stream on a regional spatial scale. Model development and field validation of the predicted current field and pollutant concentrations were conducted in conjunction with a water quality and ecological monitoring program for an offshore facility located on the Grand Banks of Canada. Results indicate that the POM-RW approach is useful to address environmental risks associated with the produced water discharges.

Numerical Study of the Mean and Filtered Characteristics of Turbulent Jets Impinging on Convex and Flat Surfaces Using LES

2012 ◽  
Author(s):  
Adra Benhacine ◽  
Zoubir Nemouchi ◽  
Lyes Khezzar ◽  
Nabil Kharoua
Keyword(s):  
Convex Surface ◽  
Numerical Study ◽  
Three Dimensional ◽  
Turbulent Jets ◽  
Scale Model ◽  
Wall Jet ◽  
Potential Core ◽  
Flat Surfaces ◽  
Free Jet ◽  
Eddy Simulation

A numerical study of a turbulent plane jet impinging on a convex surface and on a flat surface is presented, using the large eddy simulation approach and the Smagorinski-Lilly sub-grid-scale model. The effects of the wall curvature on the unsteady filtered, and the steady mean, parameters characterizing the dynamics of the wall jet are addressed in particular. In the free jet upstream of the impingement region, significant and fairly ordered velocity fluctuations, that are not turbulent in nature, are observed inside the potential core. Kelvin-Helmholtz instabilities in the shear layer between the jet and the surrounding air are detected in the form of wavy sheets of vorticity. Rolled up vortices are detached from these sheets in a more or less periodic manner, evolving into distorted three dimensional structures. Along the wall jet the Coanda effect causes a marked suction along the convex surface compared with the flat one. As a result, relatively important tangential velocities and a stretching of sporadic streamwise vortices are observed, leading to friction coefficient values on the curved wall higher than those on the flat wall.

Measurements and modeling of acoustic propagation in a scale model canyon

2019 ◽  
Vol 146 (3) ◽  
pp. 1858-1866 ◽  
Author(s):  
Megan S. Ballard ◽  
Jason D. Sagers
Keyword(s):  
Acoustic Propagation ◽  
Scale Model

Effective Shear Area in One Dimensional Ship Hull Finite Element Models to Predict Natural Frequencies of Vibration

2013 ◽  
Author(s):  
Osvaldo Pinheiro de Souza e Silva ◽  
Severino Fonseca da Silva Neto ◽  
Ilson Paranhos Pasqualino ◽  
Antonio Carlos Ramos Troyman
Keyword(s):  
Finite Element ◽  
Natural Frequencies ◽  
Three Dimensional ◽  
Experimental Tests ◽  
Numerical Results ◽  
Computational Method ◽  
Scale Model ◽  
Dimensional Model ◽  
One Dimensional ◽  
Shear Area

This work discusses procedures used to determine effective shear area of ship sections. Five types of ships have been studied. Initially, the vertical natural frequencies of an acrylic scale model 3m in length in a laboratory at university are obtained from experimental tests and from a three dimensional numerical model, and are compared to those calculated from a one dimensional model which the effective shear area was calculated by a practical computational method based on thin-walled section Shear Flow Theory. The second studied ship was a ship employed in midshipmen training. Two models were made to complement some studies and vibration measurements made for those ships in the end of 1980 decade when some vibration problems in them were solved as a result of that effort. Comparisons were made between natural frequencies obtained experimentally, numerically from a three dimensional finite element model and from a one dimensional model in which effective shear area is considered. The third and fourth were, respectively, a tanker ship and an AHTS (Anchor Handling Tug Supply) boat, both with comparison between three and one dimensional models results out of water. Experimental tests had been performed in these two ships and their results were used in other comparison made after the inclusion of another important effect that acts simultaneously: the added mass. Finally, natural frequencies experimental and numerical results of a barge are presented. The natural frequencies numerical results of vertical hull vibration obtained from these approximations of effective shear areas for the five ships are finally discussed.

Sign in / Sign up

Export Citation Format

Share Document