CCPP Performance Augmentation Using LNG Re-Gasification Cold Energy

2014 ◽  
Author(s):  
Mihir Acharya ◽  
Lalatendu Pattanayak ◽  
Hemant Gajjar ◽  
Frank Elbracht ◽  
Sandeep Asthana
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
High Efficiency ◽  
Clean Energy ◽  
Combined Cycle ◽  
Economic Feasibility ◽  
Air Cooling ◽  
Ambient Conditions ◽  
Combined Cycle Power Plant ◽  
Cold Energy

With gas becoming a fuel of choice for clean energy, Liquefied Natural Gas (LNG) is being transported and re-gasification terminals are being set up at several locations. Re-gasification of LNG leads to availability of considerable cold-energy which can be utilized to gain power and efficiency in a Gas Turbine (GT) based Power Plant. With a number of LNG Re-gasification Terminals coming up in India & around the globe, setting up of a high efficiency CCPP adjacent to the terminal considering utilization of the cold energy to augment its performance, and also save energy towards re-gasification of LNG, provides a feasible business opportunity. Thermodynamic analysis and major applications of the LNG re-gasification cold energy in Gas Turbine based power generation cycle, are discussed in this paper. The feasibility of cooling GT inlet air by virtue of the cold energy of Liquefied LNG to increase power output of a Combined Cycle Power Plant (CCPP) for different ambient conditions is analyzed and also the effect on efficiency is discussed. The use of cold energy in condenser cooling water circulating system to improve efficiency of the CCPP is also analyzed. Air cooling capacity and power augmentation for a combined cycle power plant based on the advanced class industrial heavy duty gas turbine are demonstrated as a function of the ambient temperature and humidity. The economic feasibility of utilizing the cold energy is also deliberated.

Power Augmentation Study of an Existing Combined Cycle Power Plant by Overspray Inlet Fogging

2008 ◽  
Author(s):  
Hsiao-Wei D. Chiang ◽  
Pai-Yi Wang ◽  
Hsin-Lung Li
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Power Plants ◽  
Peak Load ◽  
Combined Cycle ◽  
Ambient Conditions ◽  
Combined Cycle Power Plant ◽  
Combined Cycles ◽  
Increasing Demand

With increasing demand for power and with shortages envisioned especially during the peak load times during the summer, there is a need to boost gas turbine power. In Taiwan, most of gas turbines operate with combined cycle for base load. Only a small portion of gas turbines operates with simple cycle for peak load. To prevent the electric shortage due to derating of power plants in hot days, the power augmentation strategies for combined cycles need to be studied in advance. As a solution, our objective is to add an overspray inlet fogging system into an existing gas turbine-based combined cycle power plant (CCPP) to study the effects. Simulation runs were made for adding an overspray inlet fogging system to the CCPP under various ambient conditions. The overspray percentage effects on the CCPP thermodynamic performance are also included in this paper. Results demonstrated that the CCPP net power augmentation depends on the percentage of overspray under site average ambient conditions. This paper also included CCPP performance parametric studies in order to propose overspray inlet fogging guidelines for combined cycle power augmentation.

The Operating Experience of the Next Generation M501G/M701G Gas Turbine

2001 ◽  
Author(s):  
Y. Tsukuda ◽  
E. Akita ◽  
H. Arimura ◽  
Y. Tomita ◽  
M. Kuwabara ◽  
...  
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
High Efficiency ◽  
Thermal Power ◽  
Operating Experience ◽  
Combined Cycle ◽  
Cycle Performance ◽  
Next Generation ◽  
Gas Temperature ◽  
Combined Cycle Power Plant

The combined cycle power plant is recognized as one of the best thermal power plant for its high efficiency and cleanliness. As the main component of the combined cycle power plant, the gas turbine is the key for improvement of the combined cycle power plant. The next generation G class gas turbine, with turbine inlet gas temperature in 1,500°C range has been developed by Mitsubishi Heavy Industries, Ltd. (MHI). Many advanced technologies; a high efficiency compressor, a steam cooled low NOx combustor, a high temperature and high efficiency turbine, etc., are employed to achieve high combined cycle performance. Actually, MHI has been accumulating the operating experiences of M501G (60Hz machine) a combined cycle verification plant in MHI Takasago, Japan, and achieving the high performance and reliability. Also, M701G (50Hz machine) has been accumulating the operating experience in Higashi Niigata Thermal Power Station of Tohoku Electric Power Co., Inc. in Japan. This paper describes the technical features of M501G/M701G, and up-to-date operating status of the combined cycle power plant in MHI Takasago, Japan.

Design of a High Efficiency Combined Cycle Electric Power Plant for Low Btu Coal-Gas

1978 ◽  
Author(s):  
J. M. Mogul ◽  
R. W. Cole ◽  
G. B. Manning
Keyword(s):  
Power Plant ◽  
Electric Power ◽  
Gas Turbine ◽  
High Efficiency ◽  
Fixed Bed ◽  
Combined Cycle ◽  
Air Cooling ◽  
Fuel Gas ◽  
Coal Gas ◽  
Cycle System

A key to achieving efficient, environmentally acceptable electric power from combustion of low Btu coal gas is through an advanced design, combined gas turbine-steam turbine cycle system, integrated with a low Btu gasifier. A conceptual design of a commercial size plant of this concept is presented. It consists of a modularized system built around commercially available, pressurized fixed-bed gasifiers, hot-fuel gas cleanup and desulfurization, an advanced 3000 F (1649 C) heavy-duty gas turbine, and a conventional steam system. The turbine subsystem, with extensive test background on petroleum fuels, utilizes transpiration-air-cooling to maintain moderate metal temperatures and to protect the components from the aggressive environment. Emphasis in the design of the power plant is placed on earliest possible commercialization.

Gas Turbine-Based Combined Cycle Power Plant Modeling and Effects of Ambient Temperature

2013 ◽  
Author(s):  
Paul Shaw ◽  
Farshid Zabihian ◽  
Alan S. Fung
Keyword(s):  
Power Plant ◽  
Ambient Temperature ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Cooling System ◽  
Combined Cycle ◽  
Air Cooling ◽  
Combined Cycle Power Plant ◽  
Ambient Temperatures ◽  
Air Cooling System

This paper presents results of the combined cycle power plant (CCPP) modeling when the ambient temperature is varying. The model of the CCPP was developed using a gas turbine and a heat recovery steam generator (HRSG) models that had been already developed and validated. The model of the components was developed based on an actual existing power plant and then the operational data of the power plant was used to validate the model. The results of running the model for various ambient temperatures demonstrated that the performance of the gas turbine part of the cycle was heavily affected by the changes in the ambient temperature, particularly the output power of the gas turbines. However, the performance of the steam cycle was almost untouched by the changes of ambient temperature. This suggests that operation of the CCPP is more stable than stand-alone gas turbine in hot summer days especially if the cycle is not equipped with an inlet air cooling system.

Sign in / Sign up

Export Citation Format

Share Document