LCC Evaluation of a High Efficiency Combined Cycle Power Plant Installed in Rio de Janeiro City with a TIC-Gas Turbine Air Inlet Cooling System

2017 ◽  
Author(s):  
Paulo Roberto Cruz ◽  
Daniel Chalhub ◽  
MANOEL ANTONIO FONSECA COSTA
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
Rio De Janeiro ◽  
High Efficiency ◽  
Cooling System ◽  
Combined Cycle ◽  
Combined Cycle Power Plant ◽  
Air Inlet ◽  
Janeiro City

CCPP Performance Augmentation Using LNG Re-Gasification Cold Energy

2014 ◽  
Author(s):  
Mihir Acharya ◽  
Lalatendu Pattanayak ◽  
Hemant Gajjar ◽  
Frank Elbracht ◽  
Sandeep Asthana
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
High Efficiency ◽  
Clean Energy ◽  
Combined Cycle ◽  
Economic Feasibility ◽  
Air Cooling ◽  
Ambient Conditions ◽  
Combined Cycle Power Plant ◽  
Cold Energy

With gas becoming a fuel of choice for clean energy, Liquefied Natural Gas (LNG) is being transported and re-gasification terminals are being set up at several locations. Re-gasification of LNG leads to availability of considerable cold-energy which can be utilized to gain power and efficiency in a Gas Turbine (GT) based Power Plant. With a number of LNG Re-gasification Terminals coming up in India & around the globe, setting up of a high efficiency CCPP adjacent to the terminal considering utilization of the cold energy to augment its performance, and also save energy towards re-gasification of LNG, provides a feasible business opportunity. Thermodynamic analysis and major applications of the LNG re-gasification cold energy in Gas Turbine based power generation cycle, are discussed in this paper. The feasibility of cooling GT inlet air by virtue of the cold energy of Liquefied LNG to increase power output of a Combined Cycle Power Plant (CCPP) for different ambient conditions is analyzed and also the effect on efficiency is discussed. The use of cold energy in condenser cooling water circulating system to improve efficiency of the CCPP is also analyzed. Air cooling capacity and power augmentation for a combined cycle power plant based on the advanced class industrial heavy duty gas turbine are demonstrated as a function of the ambient temperature and humidity. The economic feasibility of utilizing the cold energy is also deliberated.

The Operating Experience of the Next Generation M501G/M701G Gas Turbine

2001 ◽  
Author(s):  
Y. Tsukuda ◽  
E. Akita ◽  
H. Arimura ◽  
Y. Tomita ◽  
M. Kuwabara ◽  
...  
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
High Efficiency ◽  
Thermal Power ◽  
Operating Experience ◽  
Combined Cycle ◽  
Cycle Performance ◽  
Next Generation ◽  
Gas Temperature ◽  
Combined Cycle Power Plant

The combined cycle power plant is recognized as one of the best thermal power plant for its high efficiency and cleanliness. As the main component of the combined cycle power plant, the gas turbine is the key for improvement of the combined cycle power plant. The next generation G class gas turbine, with turbine inlet gas temperature in 1,500°C range has been developed by Mitsubishi Heavy Industries, Ltd. (MHI). Many advanced technologies; a high efficiency compressor, a steam cooled low NOx combustor, a high temperature and high efficiency turbine, etc., are employed to achieve high combined cycle performance. Actually, MHI has been accumulating the operating experiences of M501G (60Hz machine) a combined cycle verification plant in MHI Takasago, Japan, and achieving the high performance and reliability. Also, M701G (50Hz machine) has been accumulating the operating experience in Higashi Niigata Thermal Power Station of Tohoku Electric Power Co., Inc. in Japan. This paper describes the technical features of M501G/M701G, and up-to-date operating status of the combined cycle power plant in MHI Takasago, Japan.

Gas Turbine-Based Combined Cycle Power Plant Modeling and Effects of Ambient Temperature

2013 ◽  
Author(s):  
Paul Shaw ◽  
Farshid Zabihian ◽  
Alan S. Fung
Keyword(s):  
Power Plant ◽  
Ambient Temperature ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Cooling System ◽  
Combined Cycle ◽  
Air Cooling ◽  
Combined Cycle Power Plant ◽  
Ambient Temperatures ◽  
Air Cooling System

This paper presents results of the combined cycle power plant (CCPP) modeling when the ambient temperature is varying. The model of the CCPP was developed using a gas turbine and a heat recovery steam generator (HRSG) models that had been already developed and validated. The model of the components was developed based on an actual existing power plant and then the operational data of the power plant was used to validate the model. The results of running the model for various ambient temperatures demonstrated that the performance of the gas turbine part of the cycle was heavily affected by the changes in the ambient temperature, particularly the output power of the gas turbines. However, the performance of the steam cycle was almost untouched by the changes of ambient temperature. This suggests that operation of the CCPP is more stable than stand-alone gas turbine in hot summer days especially if the cycle is not equipped with an inlet air cooling system.

Steam Turbine Driving Compressor for Gas-Steam Combined Cycle Power Plant

2009 ◽  
Author(s):  
Wancai Liu ◽  
Hui Zhang
Keyword(s):  
Power Generation ◽  
Power Plant ◽  
Steam Turbine ◽  
Gas Turbine ◽  
Combined Cycle ◽  
Thermodynamic Process ◽  
Combined Cycle Power Plant ◽  
Steam Cycle

Gas turbine is widely applied in power-generation field, especially combined gas-steam cycle. In this paper, the new scheme of steam turbine driving compressor is investigated aiming at the gas-steam combined cycle power plant. Under calculating the thermodynamic process, the new scheme is compared with the scheme of conventional gas-steam combined cycle, pointing its main merits and shortcomings. At the same time, two improved schemes of steam turbine driving compressor are discussed.

Performance Analysis of a Combined Cycle Power Plant Through Exergetic and Environmental Indices

2017 ◽  
Author(s):  
Edgar Vicente Torres González ◽  
Raúl Lugo Leyte ◽  
Martín Salazar Pereyra ◽  
Helen Denise Lugo Méndez ◽  
Miguel Toledo Velázquez ◽  
...  
Keyword(s):  
Power Plant ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Combined Cycle ◽  
Environmental Indices ◽  
Combined Cycle Power Plant ◽  
Combustion Gases ◽  
Combined Cycle Plant ◽  
Exergetic Analysis ◽  
Gas Turbine Power Plant

In this paper is carried out a comparison between a gas turbine power plant and a combined cycle power plant through exergetic and environmental indices in order to determine performance and sustainability aspects of a gas turbine and combined cycle plant. First of all, an exergetic analysis of the gas turbine and the combined is carried out then the exergetic and environmental indices are calculated for the gas turbine (case A) and the combined cycle (case B). The exergetic indices are exergetic efficiency, waste exergy ratio, exergy destruction factor, recoverable exergy ratio, environmental effect factor and exergetic sustainability. Besides, the environmental indices are global warming, smog formation and acid rain indices. In the case A, the two gas turbines generate 278.4 MW; whereas 415.19 MW of electricity power is generated by the combined cycle (case B). The results show that exergetic sustainability index for cases A and B are 0.02888 and 0.1058 respectively. The steam turbine cycle improves the overall efficiency, as well as, the reviewed exergetic indexes. Besides, the environmental indices of the gas turbines (case A) are lower than the combined cycle environmental indices (case B), since the combustion gases are only generated in the combustion chamber.

Analysis of Intermediate Temperature Combined Cycles With a Carbon Dioxide Topping Cycle

2008 ◽  
Author(s):  
R. Chacartegui ◽  
D. Sa´nchez ◽  
F. Jime´nez-Espadafor ◽  
A. Mun˜oz ◽  
T. Sa´nchez
Keyword(s):  
Carbon Dioxide ◽  
Power Plant ◽  
Gas Turbine ◽  
High Efficiency ◽  
Solar Power ◽  
Combined Cycle ◽  
Inlet Temperature ◽  
Pressure Drops ◽  
Combined Cycles ◽  
Topping Cycle

The development of high efficiency solar power plants based on gas turbine technology presents two problems, both of them directly associated with the solar power plant receiver design and the power plant size: lower turbine intake temperature and higher pressure drops in heat exchangers than in a conventional gas turbine. To partially solve these problems, different configurations of combined cycles composed of a closed cycle carbon dioxide gas turbine as topping cycle have been analyzed. The main advantage of the Brayton carbon dioxide cycle is its high net shaft work to expansion work ratio, in the range of 0.7–0.85 at supercritical compressor intake pressures, which is very close to that of the Rankine cycle. This feature will reduce the negative effects of pressure drops and will be also very interesting for cycles with moderate turbine inlet temperature (800–1000 K). Intercooling and reheat options are also considered. Furthermore, different working fluids have been analyzed for the bottoming cycle, seeking the best performance of the combined cycle in the ranges of temperatures considered.

Sign in / Sign up

Export Citation Format

Share Document