Aeromechanical Characterization of a Last Stage Steam Blade at Low Load Operation: Part 1 — Experimental Measurements and Data Processing

2020 ◽  
Author(s):  
A. Bessone ◽  
R. Guida ◽  
M. Marrè Brunenghi ◽  
S. Patrone ◽  
L. Carassale ◽  
...  
Keyword(s):  
Steam Turbine ◽  
Stability Margin ◽  
Turbine Rotor ◽  
Test Facility ◽  
Part Load ◽  
Turbine Rotor Blade ◽  
Partial Load ◽  
Elastic Instabilities ◽  
Last Stage

Abstract This paper is the first of a two-part publication that aims to experimentally evaluate, simulate and compare the aerodynamic and mechanical damping for a last stage steam turbine rotor blade at part load operation. Resulting strong off-design partial load regimes expose the last stage moving blade (LSMB) to the possible onset of aero-elastic instabilities, such as stalled and un-stalled flutter. This interaction can lead to asynchronous blade vibrations and then the risk of blade failures for high cycle fatigue. In this framework, it is necessary to develop and validate new tools for extending operating ranges, controlling non-synchronous phenomenon and supporting the design of new flutter resistant LSMB. To this end, a 3-stage downscaled steam turbine with a snubbered LSMB was designed by Ansaldo Energia and tested in the T10MW test facility of Doosan Skoda Power R&D Department within the FlexTurbine European project. The turbine was operated in a wet steam environment at very low volume flow conditions simulating different part load regimes. The steady flow field throughout the LSMB was characterized and the occurrence of flutter was investigated by inducing the blade resonance through an AC magnet excitation and measuring the overall damping. The results presented in this paper indicate that the blade always operates over the flutter stability margin validating this new blade design. In the second part of this work, the mechanical and aerodynamic contribution to the damping will be separated in order to validate the aerodynamic damping prediction of an upgraded CFD tool, already adopted in the design phase of the blade at design point.

The Effect of Stage-Diffuser Interaction on the Aerodynamic Performance and Design of LP Steam Turbine Exhaust Systems

2018 ◽  
Author(s):  
Bowen Ding ◽  
Liping Xu ◽  
Jiandao Yang ◽  
Rui Yang ◽  
Yuejin Dai
Keyword(s):  
Steam Turbine ◽  
Renewable Energy Sources ◽  
Rotor Blades ◽  
Steam Turbines ◽  
Flow Conditions ◽  
Part Load ◽  
Last Stage ◽  
Load Conditions ◽  
Turbine Exhaust ◽  
Exhaust Systems

Modern large steam turbines for power generation are required to operate much more flexibly than ever before, due to the increasing use of intermittent renewable energy sources such as solar and wind. This has posed great challenges to the design of LP steam turbine exhaust systems, which are critical to recovering the leaving energy that is otherwise lost. In previous studies, the design had been focused on the exhaust diffuser with or without the collector. Although the interaction between the last stage and the exhaust hood has been identified for a long time, little attention has been paid to the last stage blading in the exhaust system’s design process, when the machine frequently operates at part-load conditions. This study focuses on the design of LP exhaust systems considering both the last stage and the exhaust diffuser, over a wide operating range. A 1/10th scale air test rig was built to validate the CFD tool for flow conditions representative of an actual machine at part-load conditions, characterised by highly swirling flows entering the diffuser. A numerical parametric study was performed to investigate the effect of both the diffuser geometry variation and restaggering the last stage rotor blades. Restaggering the rotor blades was found to be an effective way to control the level of leaving energy, as well as the flow conditions at the diffuser inlet, which influence the diffuser’s capability to recover the leaving energy. The benefits from diffuser resizing and rotor blade restaggering were shown to be relatively independent of each other, which suggests the two components can be designed separately. Last, the potentials of performance improvement by considering both the last stage rotor restaggering and the diffuser resizing were demonstrated by an exemplary design, which predicted an increase in the last stage power output of at least 1.5% for a typical 1000MW plant that mostly operates at part-load conditions.

Comparison of Time-Resolved Turbine Rotor Blade Heat Transfer Measurements and Numerical Calculations

1991 ◽  
Author(s):  
R. S. Abhari ◽  
G. R. Guenette ◽  
A. H. Epstein ◽  
M. B. Giles
Keyword(s):  
Heat Transfer ◽  
Rotor Blade ◽  
Pressure Ratio ◽  
Time History ◽  
Turbine Rotor ◽  
Numerical Calculations ◽  
Test Facility ◽  
Time Resolved ◽  
Turbine Rotor Blade ◽  
History Of

Time-resolved turbine rotor blade heat transfer data are compared with ab initio numerical calculations. The data was taken on a transonic, 4-to-1 pressure ratio, uncooled, single-stage turbine in a short duration turbine test facility. The data consists of the time history of the heat transfer distribution about the rotor chord at midspan. The numerical calculation is a time accurate, 2-D, thin shear layer, multiblade row code known as UNSFLO. UNSFLO uses Ni’s Lax-Wendroff algorithm, conservative boundary conditions, and a time tilting algorithm to facilitate the calculation of the flow in multiple blade rows of arbitrary pitch ratio with relatively little computer time. The version used for this work had a simple algebraic Baldwin-Lomax turbulence model. The code is shown to do a good job of predicting the quantitative time history of the heat flux distribution. The wake/boundary layer and transonic interaction regions for suction and pressure surfaces are identified and the shortcomings of the current algebraic turbulence modelling in the code are discussed. The influence of hardware manufacturing tolerance on rotor heat transfer variation is discussed. A physical reasoning explaining the discrepancies between the unsteady measurement and the calculations for both the suction and pressure surfaces are given, which may be of use in improving future calculations and design procedures.

Unsteady Wet Steam Flow Field Measurements in the Last Stage of Low Pressure Steam Turbine

2015 ◽  
Author(s):  
Ilias Bosdas ◽  
Michel Mansour ◽  
Anestis I. Kalfas ◽  
Reza S. Abhari ◽  
Shigeki Senoo
Keyword(s):  
Flow Field ◽  
Steam Turbine ◽  
Total Pressure ◽  
Low Pressure ◽  
Operating Conditions ◽  
Test Facility ◽  
Flow Structures ◽  
Wet Steam ◽  
Operating Condition ◽  
Last Stage

Modern steam turbines need to operate efficiently and safely over a wide range of operating conditions. This paper presents a unique unprecedented set of time-resolved steam flowfield measurements from the exit of the last two stages of a low pressure (LP) steam turbine under various volumetric massflow conditions. The measurements were performed in the steam turbine test facility in Hitachi city in Japan. A newly developed fast response probe equipped with a heated tip to operate in wet steam flows was used. The probe tip is heated through an active control system using a miniature high-power cartridge heater developed in-house. Three different operating points, including two reduced massflow conditions, are compared and a detailed analysis of the unsteady flow structures under various blade loads and wetness mass fractions is presented. The measurements show that at the exit of the second to last stage the flow field is highly three dimensional. The measurements also show that the secondary flow structures at the tip region (shroud leakage and tip passage vortices) are the predominant sources of unsteadiness at 85% span. The high massflow operating condition exhibits the highest level of periodical total pressure fluctuation compared to the reduced massflow conditions at the inlet of the last stage. In contrast at the exit of the last stage, the reduced massflow operating condition exhibits the largest aerodynamic losses near the tip. This is due to the onset of the ventilation process at the exit of the LP steam turbine. This phenomenon results in 3 times larger levels of relative total pressure unsteadiness at 93% span, compared to the high massflow condition. This implies that at low volumetric flow conditions the blades will be subjected to higher dynamic load fluctuations at the tip region.

Development of 60Hz Titanium 48-Inch Last Stage Blade for Steam Turbine

2011 ◽  
Author(s):  
Yoriharu Murata ◽  
Naoki Shibukawa ◽  
Itaru Murakami ◽  
Joji Kaneko ◽  
Kenichi Okuno
Keyword(s):  
Steam Turbine ◽  
Mechanical Design ◽  
Thermal Power ◽  
Combined Cycle ◽  
Operating Conditions ◽  
Scale Model ◽  
Test Facility ◽  
Recent Analysis ◽  
Last Stage ◽  
Actual Size

The titanium 48-inch last stage blade that has world’s largest class exhaust annulus area and tip speed for 60Hz steam turbines has been developed. Concept of this blade is to achieve high performance and compact design of steam turbine for 1000MW thermal power plant and 300MW combined cycle plant. In the design of this blade, the optimization design has been done by using the recent analysis technologies, three dimensional CFD in aerodynamic design and FEA in mechanical design. The blade has curved axial fir-tree dovetail, snubber cover both at the tip and at the mid-span. To achieve superior vibration characteristics, continuously coupled structure was adopted for blade connection. To confirm the validity of design, first, sub-scale model blades were provided and tested in model steam turbine test facilities. Second, one row of actual size blades were assembled on the wheel of test rotor and were exposed rotating vibration test in a wheel box. Finally, these blades were tested at actual steam conditions in a full scale steam turbine test facility. In this paper, aerodynamic and mechanical design features will be introduced, and the test results of both sub-scale and actual size blades under real steam turbine operating conditions will be presented.

Fabrication and thermo-mechanical characterization of glass fiber/vinyl ester wind turbine rotor blade

2016 ◽  
Vol 91 ◽  
pp. 257-266 ◽  
Author(s):  
Umair Javaid ◽  
Zaffar M. Khan ◽  
M.B. Khan ◽  
M. Bassyouni ◽  
S.M.-S. Abdel-Hamid ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Glass Fiber ◽  
Rotor Blade ◽  
Vinyl Ester ◽  
Mechanical Characterization ◽  
Turbine Rotor ◽  
Turbine Rotor Blade ◽  
Wind Turbine Rotor

Stabilizing a 46 MW Multistage Utility Steam Turbine Using Integral Squeeze Film Bearing Support Dampers

2015 ◽  
Vol 137 (5) ◽  
Author(s):  
Bugra Ertas ◽  
Vaclav Cerny ◽  
Jongsoo Kim ◽  
Vaclav Polreich
Keyword(s):  
Steam Turbine ◽  
Critical Speed ◽  
Stability Margin ◽  
Experimental Tests ◽  
Turbine Rotor ◽  
Squeeze Film ◽  
Full Load ◽  
Vibration Data ◽  
Full Speed ◽  
Full Load Operation

A 46 MW 5500 rpm multistage single casing utility steam turbine experienced strong subsynchronous rotordynamic vibration of the first rotor mode; preventing full load operation of the unit. The root cause of the vibration stemmed from steam whirl forces generated at secondary sealing locations in combination with a flexible rotor-bearing system. Several attempts were made to eliminate the subsynchronous vibration by modifying bearing geometry and clearances, which came short of enabling full load operation. The following paper presents experimental tests and analytical results focused on stabilizing a 46 MW 6230 kg utility steam turbine experiencing subsynchronous rotordynamic instability. The paper advances an integral squeeze film damper (ISFD) solution, which was implemented to resolve the subsynchronous vibration and allow full load and full speed operation of the machine. The present work addresses the bearing-damper analysis, rotordynamic analysis, and experimental validation through waterfall plots, and synchronous vibration data of the steam turbine rotor. Analytical and experimental results show that using ISFD improved the stability margin by a factor of 12 eliminating the subsynchronous instability and significantly reducing critical speed amplification factors. Additionally, by using ISFD the analysis showed significant reduction in interstage clearance closures during critical speed transitions in comparison to the hard mounted tilting pad bearing configuration.

Stabilizing a 46 MW Multi-Stage Utility Steam Turbine Using Integral Squeeze Film Bearing Support Dampers

2014 ◽  
Author(s):  
Bugra Ertas ◽  
Vaclav Cerny ◽  
Jongsoo Kim ◽  
Vaclav Polreich
Keyword(s):  
Steam Turbine ◽  
Critical Speed ◽  
Stability Margin ◽  
Experimental Tests ◽  
Turbine Rotor ◽  
Squeeze Film ◽  
Full Load ◽  
Vibration Data ◽  
Multi Stage ◽  
Full Load Operation

A 46 MW 5,500 rpm multistage single casing utility steam turbine experienced strong subsynchronous rotordynamic vibration of the first rotor mode; preventing full load operation of the unit. The root cause of the vibration stemmed from steam whirl forces generated at secondary sealing locations in combination with flexible rotor-bearing system. Several attempts were made to eliminate the subsynchronous vibration by modifying bearing geometry and clearances, which came short of enabling full load operation. The following paper presents experimental tests and analytical results focused on stabilizing a 46 MW 6,230kg utility steam turbine experiencing subsynchronous rotordynamic instability. The paper advances an integral squeeze film damper (ISFD) solution, which was implemented to resolve the subsynchronous vibration and allow full load and full speed operation of the machine. The present work addresses the bearing-damper analysis, rotordynamic analysis, and experimental validation through waterfall plots, and synchronous vibration data of the steam turbine rotor. Analytical and experimental results show that using ISFD improved the stability margin by a factor of 12 eliminating the subsynchronous instability and significantly reducing critical speed amplification factors. Additionally, by using ISFD the analysis showed significant reduction in interstage clearance closures during critical speed transitions in comparison to the hard mounted tilting pad bearing configuration.

Unsteady Flow Features and Vibration Stresses of an Actual Size Steam Turbine Last Stage in Various Low Load Conditions

2013 ◽  
Author(s):  
Naoki Shibukawa ◽  
Yoshifumi Iwasaki ◽  
Mitsunori Watanabe
Keyword(s):  
Steam Turbine ◽  
Pressure Fluctuation ◽  
Load Condition ◽  
Test Facility ◽  
Stress Increase ◽  
Unsteady Pressure ◽  
Low Load ◽  
Vibration Stress ◽  
Last Stage ◽  
Load Conditions

Experimental investigations with a six stage real scale low pressure steam turbine operated at a very low load conditions are presented in this paper. Although the tested 35 inch last stage blades are circumferentially coupled at both tip and mid span with an intention to reduce the vibration stress, still its increase was observed at extremely low load condition. The pressure fluctuations were measured by several silicon diaphragm sensors which were mounted on both inner and outer casings of the stator inlet, exit and blade exit position. The measurement of the vibration stress was performed by strain gauges on several blades. The power spectra of unsteady pressures were precisely investigated considering both their location and steam flow condition. And the results implied that huge reverse flow and re-circulation started in the same location as a blade-to-blade CFD predicted. In terms of the correlation between vibration stress and the flow feature, the pressure fluctuation around the blade tip produces dominant effects on the vibration stress. The unsteady pressure frequency were also investigated and compared with those of the blade resonance and rotational speed. Basic trends observed in the results are similar to what other researchers reported, and on top of that, the continuous trends of pressure fluctuation and blade vibration stress were systematically investigated. Even the wall pressure, not the pressure on blade surface, showed the effective fluctuations which excited the several nodes of natural frequencies of the last stage blade. A series of FFT of fluid force by a full annulus quasi-steady CFD simulation seems to predict dominant mode of the excitation which account for the behavior of vibration stresses. The mechanism of the rapid stress increase was examined by considering CFD results and measured unsteady pressure data together. As the test facility takes a responsibility as an independent power producer, the tests were conducted in real plant operations which include multi stage effects, inlet distortions, Reynolds Number effect and so on. The obtained data and the particular indicator of vibration stress increase can be used as a part of design tool validation with neither aerodynamic nor mechanical corrections.

The Effect of Rotor Casing on Low-Pressure Steam Turbine and Diffuser Interactions

2016 ◽  
Vol 139 (2) ◽  
Author(s):  
Gursharanjit Singh ◽  
Andrew P. S. Wheeler ◽  
Gurnam Singh
Keyword(s):  
Steam Turbine ◽  
Computational Study ◽  
Low Pressure ◽  
Computational Method ◽  
Test Facility ◽  
Leakage Flows ◽  
Flow Features ◽  
Last Stage ◽  
Lp Turbine ◽  
Tip Leakage Flows

The present study aims to investigate the interaction between a last-stage steam turbine blade row and diffuser. This work is carried out using computational fluid dynamics (CFD) simulations of a generic last-stage low-pressure (LP) turbine and axial–radial exhaust diffuser attached to it. In order to determine the validity of the computational method, the CFD predictions are first compared with data obtained from an experimental test facility. A computational study is then performed for different design configurations of the diffuser and rotor casing shapes. The study focuses on typical flow features such as effects of rotor tip leakage flows and subsequent changes in the rotor–diffuser interactions. The results suggest that the rotor casing shape influences the rotor work extraction capability and yields significant improvements in the diffuser static pressure recovery.

Sign in / Sign up

Export Citation Format

Share Document