Study the Shielding Gas Effect on the Metal Transfer and Weld Pool Dynamics in GMAW

2009 ◽  
Author(s):  
Z. H. Rao ◽  
J. Hu ◽  
S. M. Liao ◽  
H. L. Tsai
Keyword(s):  
Weld Pool ◽  
Gas Metal Arc Welding ◽  
Droplet Formation ◽  
Shielding Gas ◽  
Bead Width ◽  
Droplet Shape ◽  
Helium Content ◽  
Mixing Ratios ◽  
Metal Arc Welding ◽  
Dependent Processes

This paper studied the influences of shielding gas compositions on the transport phenomena in the metal domain during gas metal arc welding (GMAW). A comprehensive model was developed to simulate the time-dependent processes of the electrode melting; the droplet formation, detachment, transfer and impingement onto the workpiece; the weld pool dynamics and bead formation and their transient coupling with the arc plasma. The transient melt-flow velocity and temperature distributions in the metal shielded by pure argon and argon-helium mixtures with various mixing ratios are presented. It is predicted that the increase of helium content and the resulting arc contraction induce an upward electromagnetic force at the bottom of the droplet to sustain the droplet at the electrode tip. As a result, the more oblate droplet and the longer droplet formation time are produced. The behaviors of the predicted droplet shape and detachment frequency are in agreement with the published results. It is also found that, under the identical energy input, the weld bead has a shallower penetration depth and broader bead width when helium content increases.

scholarly journals Influence of the CO2 Content in Shielding Gas on the Temperature of the Shielding Gas Nozzle during GMAW Welding

2020 ◽  
Vol 4 (4) ◽  
pp. 113
Author(s):  
Martin Lohse ◽  
Marcus Trautmann ◽  
Uwe Füssel ◽  
Sascha Rose
Keyword(s):  
Carrying Capacity ◽  
Gas Metal Arc Welding ◽  
Welding Current ◽  
Shielding Gases ◽  
Shielding Gas ◽  
Metal Arc Welding ◽  
Average Current ◽  
Gas Nozzle ◽  
Wire Feed ◽  
Gmaw Welding

Gas metal arc welding torches are commonly chosen based on their current-carrying capacity. It is known that the current-carrying capacity of welding torches under CO2 is usually higher than under argon dominated shielding gases. In this publication, the extent to which this can be attributed to the shielding gas dependent arc radiation is investigated. For this purpose, the influence of the shielding gas on the thermal load of the shielding gas nozzle of a GMAW torch was calorimetrically measured. These experiments were carried out for four different shielding gases (argon, CO2, and two argon/CO2 mixtures). The measurements were all performed at an average current of 300 A. The welding current was set by adjusting the wire feed rate or the voltage correction. For each case, a separate set of experiments was done. It is shown that the changed arc radiation resulting from the different shielding gases has an influence on the heat input into the gas nozzle, and thus into the torch. For the same shielding gas, this influence largely correlates with the welding voltage.

Modeling of Three-Dimensional Gas Metal Arc Welding With Groove

2007 ◽  
Author(s):  
J. Hu ◽  
H. L. Tsai
Keyword(s):  
Weld Pool ◽  
Arc Welding ◽  
Filler Metal ◽  
Gas Metal Arc Welding ◽  
Three Dimensional ◽  
Plasma Arc ◽  
Droplet Impingement ◽  
Sulfur Species ◽  
Metal Arc Welding ◽  
Arc Pressure

This article analyzes the dynamic process of groove filling and the resulting weld pool fluid flow in gas metal arc welding of thick metals with V-groove. Filler droplets carrying mass, momentum, thermal energy, and sulfur species are periodically impinged onto the workpiece. The complex transport phenomena in the weld pool, caused by the combined effect of droplet impingement, gravity, electromagnetic force, surface tension, and plasma arc pressure, were investigated to determine the transient weld pool shape and distributions of velocity, temperature, and sulfur species in the weld pool. It was found that the groove provides a channel which can smooth the flow in the weld pool, leading to poor mixing between the filler metal and the base metal, as compared to the case without a groove.

scholarly journals An adaptive approach to compensate seam tracking error in robotic welding process by a moving fixture

2018 ◽  
Vol 15 (6) ◽  
pp. 172988141881620
Author(s):  
Reza Ebrahimpour ◽  
Rasul Fesharakifard ◽  
Seyed Mehdi Rezaei
Keyword(s):  
Weld Pool ◽  
Arc Welding ◽  
Sliding Mode ◽  
Gas Metal Arc Welding ◽  
Tracking Error ◽  
Welding Process ◽  
Seam Tracking ◽  
Ball Screw ◽  
Robotic Welding ◽  
Metal Arc Welding

Welding is one of the most common method of connecting parts. Welding methods and processes are very diverse. Welding can be of fusion or solid state types. Arc welding, which is classified as fusion method, is the most widespread method of welding, and it involves many processes. In gas metal arc welding or metal inert gas–metal active gas, the protection of the molten weld pool is carried out by a shielding gas and the filler metal is in the form of wire which is automatically fed to the molten weld pool. As a semi-metallic arc process, the gas metal arc welding is a very good process for robotic welding. In this article, to conduct the metal active gas welding torch, an auxiliary ball screw servomechanism is proposed to move under a welder robot to track the welded seam. This servomechanism acts as a moving fixture and operates separately from the robot. At last, a decentralized control method based on adaptive sliding mode is designed and implemented on the fixture to provide the desired motion. Experimental results demonstrate an appropriate accuracy of seam tracking and error compensation by the proposed method.

Effect of Shielding Gas Mixture on Gas Metal Arc Welding (GMAW) of Low Carbon Steel (LR Grade A)

2016 ◽  
Vol 705 ◽  
pp. 250-254 ◽  
Author(s):  
Yustiasih Purwaningrum ◽  
Triyono ◽  
M. Wirawan Pu ◽  
Fandi Alfarizi
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Carbon Steel ◽  
Arc Welding ◽  
Gas Metal Arc Welding ◽  
Low Carbon Steel ◽  
Low Carbon ◽  
Shielding Gas ◽  
Weld Metals ◽  
Metal Arc Welding

The aimed of this research is to determine the feasibility and effect of the mixture of the shielding gas in the physical and mechanical properties. Low carbon steel LR grade A in a thickness 12 mm were joined in butt joint types using GMAW (Gas Metal Arc Welding) with groove’s gap 5 mm and groove angle’s 400 with variation of shielding gas composition. The composition of shielding gas that used were 100% Ar, 100 % CO2 and 50% Ar + 50 % CO2. The measured of mechanical properties with regard to strength, hardness and toughness using, tensile test, bending test, Vickers hardness Test, and Charpy impact test respectively. The physical properties examined with optical microscope. Results show that tensile strength of welding metals are higher than raw materials. Welds metal with mixing Ar + CO shielding gas has the highest tensile strength. Hardness of weld metals with the shielding gas 100% Ar, 100 % CO2 and 50% Ar + 50 % CO2 are 244.9; 209.4; and 209.4 VHN respectively. The temperature of Charpy test was varied to find the transition temperature of the materials. The temperature that used were –60°C, -40°C, -20°C, 0°C, 20°C , and room temperature. Weld metals with various shielding gas have similar trends of toughness flux that was corellated with the microstructure of weld .

scholarly journals Visualisation and optimisation of shielding gas coverage during gas metal arc welding

2018 ◽  
Vol 255 ◽  
pp. 451-462 ◽  
Author(s):  
I. Bitharas ◽  
N.A. McPherson ◽  
W. McGhie ◽  
D. Roy ◽  
A.J. Moore
Keyword(s):  
Arc Welding ◽  
Gas Metal Arc Welding ◽  
Shielding Gas ◽  
Metal Arc Welding
Sign in / Sign up

Export Citation Format

Share Document