Effect of Water Injection in Acetylene-Diesel Dual Fuel DI Diesel Engine

2012 ◽  
Author(s):  
T. Lakshmanan ◽  
A. Khadeer Ahmed ◽  
G. Nagarajan
Keyword(s):  
Diesel Engine ◽  
Thermal Efficiency ◽  
Alternative Fuels ◽  
Gas Flow ◽  
Water Injection ◽  
Intake Manifold ◽  
Dual Fuel ◽  
Intake Port ◽  
Gas Temperature ◽  
Brake Thermal Efficiency

Gaseous fuels are good alternative fuels to improve the energy crisis of today’s situation due to its clean burning characteristics. However, the incidence of backfire and knock remains a significant barrier in commercialization. With the invention of latest technology, the above barriers are eliminated. One such technique is timed injection of water into the intake port. In the present investigation, acetylene was aspirated in the intake manifold of a single cylinder diesel engine, with a gas flow rate of 390 g/h, along with water injected in the intake port, to overcome the backfire and knock problems in gaseous dual fuel engine. The brake thermal efficiency and emissions such as NOx, smoke, CO, HC, CO2 and exhaust gas temperature were studied. Dual fuel operation of acetylene induction with injection of water results in lowered NOx emissions with complete elimination of backfire and knock at the expense of brake thermal efficiency.

Assessment of a Syngas-Diesel Dual Fuelled Compression Ignition Engine

2010 ◽  
Author(s):  
Bibhuti B. Sahoo ◽  
Niranjan Sahoo ◽  
Ujjwal K. Saha
Keyword(s):  
Diesel Engine ◽  
Thermal Efficiency ◽  
Gas Flow ◽  
Direct Injection ◽  
Dual Fuel ◽  
Exhaust Gas ◽  
Compression Ignition ◽  
Gas Temperature ◽  
Compression Ignition Engine ◽  
Exhaust Gas Temperature

Synthesis gas (Syngas), a mixture of hydrogen and carbon monoxide, can be manufactured from natural gas, coal, petroleum, biomass, and even from organic wastes. It can substitute fossil diesel as an alternative gaseous fuel in compression ignition engines under dual fuel operation route. Experiments were conducted in a single cylinder, constant speed and direct injection diesel engine fuelled with syngas-diesel in dual fuel mode. The engine is designed to develop a power output of 5.2 kW at its rated speed of 1500 rpm under variable loads with inducted syngas fuel having H2 to CO ratio of 1:1 by volume. Diesel fuel as a pilot was injected into the engine in the conventional manner. The diesel engine was run at varying loads of 20, 40, 60, 80 and 100%. The performance of dual fuel engine is assessed by parameters such as thermal efficiency, exhaust gas temperature, diesel replacement rate, gas flow rate, peak cylinder pressure, exhaust O2 and emissions like NOx, CO and HC. Dual fuel operation showed a decrease in brake thermal efficiency from 16.1% to a maximum of 20.92% at 80% load. The maximum diesel substitution by syngas was found 58.77% at minimum exhaust O2 availability condition of 80% engine load. The NOx level was reduced from 144 ppm to 103 ppm for syngas-diesel mode at the best efficiency point. Due to poor combustion efficiency of dual fuel operation, there were increases in CO and HC emissions throughout the range of engine test loads. The decrease in peak pressure causes the exhaust gas temperature to rise at all loads of dual fuel operation. The present investigation provides some useful indications of using syngas fuel in a diesel engine under dual fuel operation.

Design and Development of Surge Tank for NOx Emission Reduction in B20 Biofueled Diesel Engine

2020 ◽  
Vol 12 (5) ◽  
Author(s):  
Jaspreet Hira ◽  
Basant Singh Sikarwar ◽  
Rohit Sharma ◽  
Vikas Kumar ◽  
Prakhar Sharma
Keyword(s):  
Diesel Engine ◽  
Research Work ◽  
Engine Performance ◽  
Nox Emission ◽  
Intake Manifold ◽  
Exhaust Gas ◽  
Gas Temperature ◽  
Surge Tank ◽  
Brake Thermal Efficiency ◽  
Exhaust Gas Temperature

In this research work, a surge tank is developed and utilised in the diesel engine for controlling the NOX emission. This surge tank acts as a damper for fluctuations caused by exhaust gases and also an intercooler in reducing the exhaust gas temperature into the diesel engine intake manifold. With the utilisation of the surge tank, the NOX emission level has been reduced to approximately 50%. The developed surge tank is proved to be effective in maintaining the circulation of water at appropriate temperatures. A trade-off has been established between the engine performance parameters including the brake thermal efficiency, brake specific fuel consumption, exhaust gas temperature and all emission parameters including HC and CO.

scholarly journals Evaluation Dual Fuel Engine Fuelled With Hydrogen and Biogas as Secondary Fuel

2019 ◽  
Vol 8 (2) ◽  
pp. 1902-1905
Keyword(s):  
Diesel Engine ◽  
Thermal Efficiency ◽  
Dominant Role ◽  
Single Mode ◽  
Dual Fuel ◽  
Nox Emissions ◽  
Brake Thermal Efficiency ◽  
Pilot Fuel ◽  
Present Context ◽  
Inlet Manifold

The present energy scenario hydrogen fuel plays a dominant role in the power generation. Due to its unique characteristics of an extensive range of flammability, high flame speed, and diffusivity. In this present investigation, the diesel engine is converted into dual-fuel mode devoid of major conversions of the engine. The tests are performed on a dual-fuel mode and investigated the efficiency, emissions, and combustion features of the diesel engine. In the present context, hydrogen and biogas are injected from the inlet manifold as subsidiary fuel and diesel are injected as pilot fuel. The gaseous fuel injected in two different flow rates they are, 3 litres per minute (lpm), and 4lpm. The results from the experimentation revealed that the diesel with 4 lpm of hydrogen shows the 31.11 % enhancement of brake thermal efficiency but it shows 4.14% higher NOX emissions when compared with the pure diesel. But it shows. At the same time diesel with 4 lpm of Biogas exhibits 15.90% enhancement of brake thermal efficiency and 8.96% decrease in the NOX emissions in contrast to that of the single-mode of fuel with diesel.

Studies on Influence of Injection Timing and Diesel Replacement on LPG-Diesel Dual-Fuel Engine

2003 ◽  
Author(s):  
C. V. Sudhir ◽  
Vijay Desai ◽  
Y. Suresh Kumar ◽  
P. Mohanan
Keyword(s):  
Energy Consumption ◽  
Diesel Engine ◽  
Fuel Consumption ◽  
Thermal Efficiency ◽  
Dual Fuel ◽  
Injection Timing ◽  
Brake Thermal Efficiency ◽  
Full Load ◽  
Smoke Density ◽  
Diesel Operation

Reducing the emissions and fuel consumption for IC engines are no longer the future goals; instead they are the demands of today. People are concerned about rising fuel costs and effects of emissions on the environment. The major contributor for the increased levels of pollutants is the Diesel engines. Diesel engine finds application in almost in all fields, including transportation sector such as buses, trucks, railway engines, etc. and in industries as power generating units. In the present work an attempt is made for effective utilization of diesel engine aiming for reduction in fuel consumption and smoke density. This is achieved by some minor modifications in diesel engine, so as to run the existing diesel engine as a LPG-Diesel dual-fuel engine with LPG (Liquefied Petroleum Gas) induction at air intake. The important aspect of LPG-Diesel dual-fuel engine is that it shows significant reduction in smoke density and improved brake thermal efficiency with reduced energy consumption. An existing 4-S, single cylinder, naturally aspirated, water-cooled, direct injection, CI engine test rig was used for the experimental purpose. With proper instrumentation the tests were conducted under various LPG flow rates, loads, and injection timings. The influence of the diesel replacement by LPG on smoke density, brake specific energy consumption and brake thermal efficiency were studied. The optimal diesel replacement pertaining to the maximum allowable LPG gas flow limits could be assessed with these experiments. The influence of the injection timing variation on the engine performance and smoke density were analyzed form the experimental results. It was also observed that beyond half load operation of the dual-fuel engine, the brake thermal efficiency increases with diesel replacement, and at full load up to 4% improvement was observed compared to full diesel operation. At full load reduction in smoke density up to 25–36% was observed compared to full diesel operation. At advance injection timing of 30°btdc the performance was better with lower emissions compared to normal and retarded injection timings.

scholarly journals A Research on the Performance, Emission and Combustion Parameters of the Hydrogen and Biogas Dual Fuel Engine

2020 ◽  
Vol 12 (3) ◽  
pp. 129-136
Author(s):  
Avinash MUTLURI ◽  
Radha Krishna GOPIDESI ◽  
Srinivas Viswanath VALETI
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Thermal Efficiency ◽  
Gaseous Fuel ◽  
Dual Fuel ◽  
Nox Emissions ◽  
Brake Thermal Efficiency ◽  
Secondary Fuel ◽  
Pilot Fuel ◽  
Inlet Manifold

In the present research a diesel engine has been converted to dual fuel mode, injecting hydrogen and biogas as secondary fuel and the tests were conducted in dual fuel mode to evaluate the performance, emissions and combustion parameters of the engine. Diesel as a pilot fuel, hydrogen and biogas as a secondary fuel were injected from the inlet manifold. The hydrogen and the biogas which is a gaseous fuel were injected at 5 liters per minute (lpm) and the tests were conducted separately. From these tests, it was noted that there is an enhancement of 27.28% in brake thermal efficiency (BTE) and increment of 10.70% in NOX emissions for diesel with 5 lpm hydrogen compared with diesel fuel under single fuel mode. Also, it was noted that the reduction in BTE was around 36.50% and NOX emissions about 15.68 % for diesel with 5 lpm biogas when compared with diesel fuel under single fuel mode.

scholarly journals An Experimental Study on the Performance Characteristics of a Diesel Engine Fueled with ULSD-Biodiesel Blends

2020 ◽  
Vol 10 (2) ◽  
pp. 183-190
Author(s):  
Viet Dung Tran ◽  
Anh Tuan Le ◽  
Anh Tuan Hoang
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Thermal Efficiency ◽  
Cooling System ◽  
Specific Fuel Consumption ◽  
Exhaust Gas ◽  
Gas Temperature ◽  
Brake Thermal Efficiency ◽  
Exhaust Gas Temperature ◽  
Low Sulfur

As a rule, the highest permissible sulfur content in the marine fuel must drop below 0.5% from 1 January 2020 for global fleets. As such, ships operating in emission control areas must use low sulfur or non-sulfur fuel to limit sulfur emissions as a source of acid rain. However, that fact has revealed two challenges for the operating fleet: the very high cost of ultra-low sulfur diesel (ULSD) and the installation of the fuel conversion system and the ULSD cooling system. Therefore, a solution that blends ULSD and biodiesel (BO) into a homogeneous fuel with properties equivalent to that of mineral fuels is considered to be significantly effective. In the current work, an advanced ultrasonic energy blending technology has been applied to assist in the production of homogeneous ULSD-BO blends (ULSD, B10, B20, B30, and B50 with blends of coconut oil methyl ester with ULSD of 10%, 20%, 30% and 50% by volume) which is supplied to a small marine diesel engine on a dynamo test bench to evaluate the power and torque characteristics, also to consider the effect of BO fuel on specific fuel consumption exhaust gas temperature and brake thermal efficiency. The use of the ultrasonic mixing system has yielded impressive results for the homogeneous blend of ULSD and BO, which has contributed to improved combustion quality and thermal efficiency. The results have shown that the power, torque, and the exhaust gas temperature, decrease by approximately 9%, 2%, and 4% respectively with regarding the increase of the blended biodiesel rate while the specific fuel consumption and brake thermal efficiency tends to increase of around 6% and 11% with those blending ratios.

Hydrogen Gas in Diesel Engine Using DEE as Ignition Source

2014 ◽  
Vol 591 ◽  
pp. 150-154 ◽  
Author(s):  
C. Dhanasekaran ◽  
G. Mohankumar
Keyword(s):  
Diesel Engine ◽  
Alternative Fuels ◽  
Driving Forces ◽  
Petroleum Products ◽  
Hydrogen Gas ◽  
Ignition Source ◽  
Intake Manifold ◽  
Dual Fuel ◽  
Hydrogen Flow ◽  
Carbon Based

Over the past two decades considerable effort has been taken to develop and introduce new alternate source of energy for the conventional gasoline and diesel. Environmental pollution and uncertainty in cost of petroleum products are the principal driving forces for this movement. The major pollutants from an Diesel engine system are NOx, Smoke, particulate matter, Soot. Several alternative fuels were tried but all of them are carbon based fuels, therefore net carbon based pollutants cannot be reduced. One alternative to carbon-based fuels is hydrogen. Hydrogen a non-carbon fuel only can meet zero emission vehicles standards in future. Hydrogen can be commercially used as a fuel even though it is having a number of technical and economical barriers. Numerous techniques are available for use in C.I. engine such as dual fuel made, by using spark plug, glow plug, DEE as an ignition enhancer. Hydrogen was used in a diesel engine in the dual fuel mode-using diesel as an ignition source in neat form using DEE. In neat form the DEE was introduced in the manifold. In order to have a precise control of hydrogen flow and to avoid the backfire and pre – ignition problems hydrogen was injection in to intake manifold; DEE injection follows the hydrogen injection. DEE mixed with air and flows into the combustion chamber as DEE auto ignites first followed by hydrogen combustion. A single cylinder-four stroke water-cooled naturally aspirated constant speed D.I. diesel engine with a rated output of 3.7 kW at 1500 rpm was used for the experimental purpose. Measurements were taken with respect to the performance, combustion and emission studies.

Effect of Load Level on the Performance of a Dual Fuel Compression Ignition Engine Operating on Syngas Fuels With Varying H2/CO Content

2011 ◽  
Vol 133 (12) ◽  
Author(s):  
B. B. Sahoo ◽  
U. K. Saha ◽  
N. Sahoo
Keyword(s):  
Diesel Engine ◽  
Thermal Efficiency ◽  
Peak Pressure ◽  
Gaseous Fuel ◽  
Dual Fuel ◽  
Engine Fuel ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Engine Operation ◽  
Brake Thermal Efficiency

Syngas, an environmentally friendly alternative gaseous fuel for internal combustion engine operation, mainly consists of carbon monoxide (CO) and hydrogen (H2). It can substitute fossil diesel oil in a compression ignition diesel engine through dual fuel operation route. In the present investigation, experiments were conducted in a constant speed single cylinder direct injection diesel engine fuelled with syngas-diesel in a dual fuel operation mode. The main contribution of this study is to introduce the new synthetic gaseous fuel (syngas) including the possible use of CO gas, an alternative diesel engine fuel. In this work, four different H2 and CO compositions of syngas were chosen for dual fuel study under different engine loading levels. Keeping the same power output at the corresponding tested loads, the engine performance of dual fuel operations were compared to that of diesel mode for the entire load range. The maximum diesel replacement in the engine was found to be 72.3% for 100% H2 fuel. This amount replacement rate was reduced for the low energetic lower H2 content fuels. The brake thermal efficiency was always found highest (about 21%) in the case of diesel mode operation. However, the 100% H2 syngas showed a comparative performance level with diesel mode at the expense of higher NOx emissions. At 80% engine load, the brake thermal efficiency was found to be 15.7% for 100% CO syngas. This value increased to 16.1%, 18.3% and 19.8% when the 100% CO syngas composition was replaced by H2 contents of 50%, 75% and 100%, respectively. At part loads (i.e., at 20% and 40%), dual fuel mode resulted a poor performance including higher emission levels. In contrast, at higher loads, syngas fuels showed a good competitive performance to diesel mode. At all the tested loads, the NOx emission was observed highest for 100% H2 syngas as compared to other fuel conditions, and a maximum of 240 ppm was found at 100% load. However, when the CO fractions of 25%, 50% and 100%, were substituted to hydrogen fuel, the emission levels got reduced to 175 ppm, 127 ppm, and 114 ppm, respectively. Further, higher CO and HC emission levels were recorded for 25%, 50%, and 100% CO fraction syngas fuels due to their CO content. Ignition delay was found to increase for the dual fuel operation as compared to diesel mode, and also it seemed to be still longer for higher H2 content syngas fuels. The peak pressure and maximum rate of pressure rise were found to decrease for all the cases of dual fuel operation, except for 100% H2 syngas (beyond 60% load). The reduction in peak pressure resulted a rise in the exhaust gas temperature at all loads under dual fuel operation. The present investigation provides some useful experimental data which can be applied to the possible existing engine parameters modifications to produce a competitive syngas dual fuel performance at all the loading operations.

Evaluating the Influence of Biogas Flow Rate and Addition of Cerium Oxide Nanoparticles on the Performance of a Dual Fuel Engine Using Taguchi Method

2017 ◽  
Vol 17 ◽  
pp. 179-193
Author(s):  
M. Feroskhan ◽  
Ismail Saleel
Keyword(s):  
Cerium Oxide ◽  
Flow Rate ◽  
Thermal Efficiency ◽  
Equivalence Ratio ◽  
Volumetric Efficiency ◽  
Dual Fuel ◽  
Exhaust Gas ◽  
Gas Temperature ◽  
Brake Thermal Efficiency ◽  
Exhaust Gas Temperature

Biogas is a promising alternative fuel for compression ignition (CI) engines owing to its renewability and carbon neutrality. In this study, biogas was used along with diesel in a CI engine in dual fuel mode, i.e. biogas is inducted along with air and this mixture is ignited by the in-cylinder injection of diesel. The viability of using cerium oxide (CeO2) nanoparticles as an additive to diesel was also explored. The effects of three parameters, viz. biogas flow rate and concentration of CeO2 nanoparticles and applied load on engine performance were investigated under constant speed operation. These parameters were varied in the ranges of 0 - 12 litre/min, 0 - 35 mg/litre and 5 - 22 N.m respectively. The experimental test matrix was reduced to 16 trials using Taguchi’s approach. Performance was quantified in terms of brake thermal efficiency, volumetric efficiency, diesel consumption, exhaust gas temperature and overall equivalence ratio. The criteria for optimum performance were defined as maximum brake thermal and volumetric efficiencies and minimum diesel consumption, exhaust gas temperature and overall equivalence ratio. Optimum operating conditions were identified by evaluating the signal to noise ratio (SNR) for each performance parameter and using the higher-the-better (HTB) or lower-the-better (LTB) condition as applicable. Contributions of individual parameters towards the performance indices were found using ANOVA. Load was found to be the main contributing factor for brake thermal efficiency, exhaust gas temperature and overall equivalence ratio. Biogas flow rate showed significant contribution towards volumetric efficiency. Biogas flow rate and load had comparable influences on diesel consumption. Addition of nanoparticles showed minor contribution towards all the performance parameters.

Sign in / Sign up

Export Citation Format

Share Document