Fluid-Structure Coupling Analysis for the Flow Distribution Device of Nuclear Reactor Internals

2013 ◽  
Author(s):  
Mingqian Zhang ◽  
Yuangang Duan ◽  
Xiaobing Ran ◽  
Yanwu Liu
Keyword(s):  
Fluid Flow ◽  
Flow Field ◽  
Pressure Vessel ◽  
Flow Distribution ◽  
Reactor Pressure Vessel ◽  
Turbulent Model ◽  
Pressurized Water ◽  
Fluid Structure ◽  
Ansys Cfx ◽  
Reactor Pressure

In order to better understand the stresses to which the flow distribution device (FDD) is subjected for the pressure fluctuation, we need to improve our knowledge of the fluid flow inside the reactor pressure vessel (RPV). The flow field of the reactor lower plenum which is associated with a typical pressurized water reactor (PWR) is simulated by using ANSYS CFX code. Calculations have been carried out from reactor pressure vessel inlet to the core outlet. Grid sizes of million nodes with the k-epsilon turbulent model have been used with a porous zone approach for the reactor core space. Predictions of the steady-state pressure and velocity field have been made. The results are compared with the scaled experiment data in order to verify the accurate description of the fluid flow. Based on this verified turbulent model, a sub-domain is extracted from the lower plenum for the transient two-way Fluid-Structure Interaction (FSI) simulation which is limited by the computer capability and computing time. This transient analysis of fluid-structure coupling system is conducted by using CFX and ANSYS in numeric calculation of flow field and structure, with an exchanging platform MFX-ANSYS/CFX which can transfer fluid pressure and structure displacement between computational fluid dynamics (CFD) and computational structure dynamics (CSD) grid systems. The loose coupling method is used to investigate the transient dynamic response of the flow distribution device which is immerged in the bottom plenum. Dynamic stress and strain of the flow distribution device are given and discussed. This analysis practice can be guidance for the optimization design of reactor and improve our understanding of reactor components flow induced vibration phenomena.

Buoyancy Driven Coolant Mixing Studies of Natural Circulation Flows at the ROCOM Test Facility Using ANSYS CFX

2006 ◽  
Author(s):  
Thomas Ho¨hne ◽  
So¨ren Kliem ◽  
Ulrich Rohde ◽  
Frank-Peter Weiß
Keyword(s):  
Pressure Vessel ◽  
Natural Circulation ◽  
Reactor Pressure Vessel ◽  
Density Difference ◽  
Test Facility ◽  
Mean Flow ◽  
Pressurized Water ◽  
The Core ◽  
Ansys Cfx ◽  
Reactor Pressure

Coolant mixing in the cold leg, downcomer and the lower plenum of pressurized water reactors is an important phenomenon mitigating the reactivity insertion into the core. Therefore, mixing of the de-borated slugs with the ambient coolant in the reactor pressure vessel was investigated at the four loop 1:5 scaled ROCOM mixing test facility. Thermal hydraulics analyses showed, that weakly borated condensate can accumulate in particular in the pump loop seal of those loops, which do not receive safety injection. After refilling of the primary circuit, natural circulation in the stagnant loops can re-establish simultaneously and the de-borated slugs are shifted towards the reactor pressure vessel (RPV). In the ROCOM experiments, the length of the flow ramp and the initial density difference between the slugs and the ambient coolant was varied. From the test matrix experiments with 0 resp. 2% density difference between the de-borated slugs and the ambient coolant were used to validate the CFD software ANSYS CFX. To model the effects of turbulence on the mean flow a higher order Reynolds stress turbulence model was employed and a mesh consisting of 6.4 million hybrid elements was utilized. Only the experiments and CFD calculations with modeled density differences show a stratification in the downcomer. Depending on the degree of density differences the less dense slugs flow around the core barrel at the top of the downcomer. At the opposite side the lower borated coolant is entrained by the colder safety injection water and transported to the core. The validation proves that ANSYS CFX is able to simulate appropriately the flow field and mixing effects of coolant with different densities.

scholarly journals Analysis of the Technological Evolution of Materials Requirements Included in Reactor Pressure Vessel Manufacturing Codes

2021 ◽  
Vol 13 (10) ◽  
pp. 5498
Author(s):  
Alvaro Rodríguez-Prieto ◽  
Mariaenrica Frigione ◽  
John Kickhofel ◽  
Ana M. Camacho
Keyword(s):  
Sustainable Development ◽  
Pressure Vessel ◽  
Nuclear Regulatory Commission ◽  
Green Energy ◽  
Reactor Pressure Vessel ◽  
Technical Literature ◽  
Pressurized Water ◽  
Water Reactors ◽  
Regulatory Commission ◽  
Reactor Pressure

The growth of green energy technologies within the frame of the 7th Sustainable Development Goal (SDG) along with the concern about climatic changes make nuclear energy an attractive choice for many countries to ensure energy security and sustainable development as well as to actively address environmental issues. Unlike nuclear equipment (immovable goods), which are often well-catalogued and analyzed, the design and manufacturing codes and their standardized materials specifications can be considered movable and intangible goods that have not been thoroughly studied based on a detailed evaluation of the scientific and technical literature on the reactor pressure vessel (RPV) materials behavior. The aim of this work is the analysis of historical advances in materials properties research and associated standardized design codes requirements. The analysis, based on the consolidated U.S. Nuclear Regulatory Commission (NRC) Regulatory Guide (RG) 1.99 Rev.2 model, enables determination of the best materials options, corresponding to some of the most widely used material specifications such as WWER 15Kh2MFAA (used from the 1970s and 1980s; already in operation), ASME SA-533 Grade B Cl.1 (used in pressurized water reactor-PWR 2nd–4th; already in operation), DIN 20MnMoNi55 and DIN 22NiMoCr37 (used in PWR 2nd–4th) as well as ASTM A-336 Grade F22V (current designs). Consequently, in view of the results obtained, it can be concluded that the best options correspond to recently developed or well-established specifications used in the design of pressurized water reactors. These assessments endorse the fact that nuclear technology is continually improving, with safety being its fundamental pillar. In the future, further research related to the technical heritage from the evolution of materials requirements for other clean and sustainable power generation technologies will be performed.

Fluid Flow Field in the Annulus of Boiling Water (BWR) Nuclear Reactors Under Normal and Accident Conditions

2009 ◽  
Author(s):  
Raju Ananth ◽  
Karen Fujikawa ◽  
Jay Gillis
Keyword(s):  
Fluid Flow ◽  
Velocity Field ◽  
Flow Field ◽  
Pressure Vessel ◽  
Theoretical Study ◽  
Nuclear Reactors ◽  
Boiling Water ◽  
Flow Conditions ◽  
Accident Conditions ◽  
Reactor Pressure

This paper presents a theoretical study of the velocity field in the annulus formed between the Reactor Pressure Vessel (RPV) and the shroud of a Boiling Water Reactor (BWR) under normal and accident flow conditions. Simplified geometry and an ideal irrotational flow are assumed to solve the problem using velocity potentials.

Dosimetry Assessments for the Reactor Pressure Vessel and Core Barrel in UK Pressurized Water Reactor (PWR) Plant

2012 ◽  
Vol 9 (4) ◽  
pp. 104016 ◽  
Author(s):  
D. A. Thornton ◽  
D. A. Allen ◽  
A. P. Huggon ◽  
D. J. Picton ◽  
A. T. Robinson ◽  
...  
Keyword(s):  
Pressure Vessel ◽  
Reactor Pressure Vessel ◽  
Pressurized Water Reactor ◽  
Pressurized Water ◽  
Water Reactor ◽  
Reactor Pressure

Reactor Pressure Vessel Integrity in Light of the Evolution of Materials Science and Engineering

2005 ◽  
Vol 473-474 ◽  
pp. 287-292
Author(s):  
Péter Trampus
Keyword(s):  
Pressure Vessel ◽  
Structural Integrity ◽  
Materials Science ◽  
Reactor Pressure Vessel ◽  
Special Focus ◽  
Science And Engineering ◽  
Pressurized Water ◽  
Integrity Assessment ◽  
Materials Science And Engineering ◽  
Reactor Pressure

Structural integrity of the reactor pressure vessel of pressurized water reactors is one of the key safety issues in nuclear power operation. Integrity may be jeopardized during operational transients. The problem is compounded by radiation damage of the vessel structural materials. Structural integrity assessment as an interdisciplinary field is primarily based on materials science and fracture mechanics. The paper gives an overview on the service induced damage processes and associated changes of mechanical properties, the prediction of degradation and the assessment of the entire component against brittle fracture with a special focus on how the evolution of materials science and engineering has contributed to reactor vessel structural integrity assessment.

Structural Reliability Evaluation on the Pressurized Water Reactor Pressure Vessel Under Pressurized Thermal Shock Events

2014 ◽  
Author(s):  
Hsoung-Wei Chou ◽  
Chin-Cheng Huang
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Thermal Shock ◽  
Pressure Vessel ◽  
Nuclear Power ◽  
Reactor Pressure Vessel ◽  
Pressurized Water Reactor ◽  
Pressurized Water ◽  
Pressurized Thermal Shock ◽  
Reactor Pressure

The failure probability of the pressurized water reactor pressure vessel for a domestic nuclear power plant in Taiwan has been evaluated according to the technical basis of the USNRC’s new pressurized thermal shock (PTS) screening criteria. The ORNL’s FAVOR code and the PNNL’s flaw models are employed to perform the probabilistic fracture mechanics analysis based on the plant specific parameters of the domestic reactor pressure vessel. Meanwhile, the PTS thermal hydraulic and the probabilistic risk assessment data analyzed from a similar nuclear power plant in the United States for establishing the new PTS rule are applied as the loading condition. Besides, an RT-based regression formula derived by the USNRC is also utilized to verify the through-wall cracking frequencies. It is found that the through-wall cracking of the analyzed reactor pressure vessel only occurs during the PTS events resulted from the stuck-open primary safety relief valves that later reclose, but with only an insignificant failure risk. The results indicate that the Taiwan domestic PWR reactor pressure vessel has sufficient structural margin for the PTS attack until either the end-of-license or for the proposed extended operation.

MAI Benchmark Campaign of International Software for Reactor Pressure Vessel Integrity Assessment

2014 ◽  
Author(s):  
Emilie Dautreme ◽  
Emmanuel Remy ◽  
Roman Sueur ◽  
Jean-Philippe Fontes ◽  
Karine Aubert ◽  
...  
Keyword(s):  
United States ◽  
Pressure Vessel ◽  
Software Tool ◽  
The United States ◽  
Pressure Vessels ◽  
Reactor Pressure Vessel ◽  
Pressurized Water ◽  
Integrity Assessment ◽  
Benchmark Study ◽  
Reactor Pressure

Nuclear Reactor Pressure Vessel (RPV) integrity is a major issue concerning plant safety and this component is one of the few within a Pressurized Water Reactor (PWR) whose replacement is not considered as feasible. To ensure that adequate margins against failure are maintained throughout the vessel service life, research engineers have developed and applied computational tools to study and assess the probability of pressure vessel failure during operating and postulated loads. The Materials Ageing Institute (MAI) sponsored a benchmark study to compare the results from software developed in France, Japan and the United States to compute the probability of flaw initiation in reactor pressure vessels. This benchmark study was performed to assess the similarities and differences in the software and to identify the sources of any differences that were found. Participants in this work included researchers from EDF in France, CRIEPI in Japan and EPRI in the United States, with each organization using the probabilistic software tool that had been developed in their country. An incremental approach, beginning with deterministic comparisons and ending by assessing Conditional Probability of crack Initiation (CPI), provided confirmation of the good agreement between the results obtained from the software used in this benchmark study. This conclusion strengthens the confidence in these probabilistic fracture mechanics tools and improves understanding of the fundamental computational procedures and algorithms.

The Development of Radiation Embrittlement Models for U.S. Power Reactor Pressure Vessel Steels

2006 ◽  
Author(s):  
J. A. Wang ◽  
N. S. V. Rao ◽  
S. Konduri
Keyword(s):  
Pressure Vessel ◽  
Prediction Models ◽  
Irradiation Temperature ◽  
Reactor Pressure Vessel ◽  
Boiling Water ◽  
Radiation Embrittlement ◽  
Pressurized Water ◽  
Water Reactor ◽  
Water Reactors ◽  
Reactor Pressure

The information fusion technique is used to develop radiation embrittlement prediction models for reactor pressure vessel (RPV) steels from U.S. power reactors, including boiling water reactors and pressurized water reactors. The Charpy transition temperature-shift data is used as the primary index of RPV radiation embrittlement in this study. Six parameters—Cu, Ni, P, neutron fluence, irradiation time, and irradiation temperature—are used in the embrittlement prediction models. The results indicate that this new embrittlement predictor achieved reductions of about 49.5% and 52% in the uncertainties for plate and weld data, respectively, for pressurized water reactor and boiling water reactor data, compared with the Nuclear Regulatory Commission Regulatory Guide 1.99, Rev. 2. The implications of dose-rate effect and irradiation temperature effects for the development of radiation embrittlement models are also discussed.

Sign in / Sign up

Export Citation Format

Share Document