Organic Working Fluids for a Combined Power and Cooling Cycle

2003 ◽  
Author(s):  
Sanjay Vijayaraghavan ◽  
D. Y. Goswami
Keyword(s):  
Power Plants ◽  
Thermodynamic Cycle ◽  
Working Fluid ◽  
Water Mixture ◽  
Heat Sources ◽  
Absorption Refrigeration ◽  
Ammonia Water ◽  
Working Fluids ◽  
Fluid Mixtures ◽  
Advantages And Disadvantages

A new thermodynamic cycle has been developed for the simultaneous production of power and cooling from low temperature heat sources. The proposed cycle combines the Rankine and absorption refrigeration cycles, providing power and cooling as useful outputs. Initial studies were performed with an ammonia-water mixture as the working fluid in the cycle. This work extends the application of the cycle to working fluids consisting of organic fluid mixtures. Organic working fluids have been used successfully in geothermal power plants, as working fluids in Rankine cycles. An advantage of using organic working fluids is that the industry has experience with building turbines for these fluids. A commercially available optimization program has been used to maximize the thermodynamic performance of the cycle. The advantages and disadvantages of using organic fluid mixtures as opposed to an ammonia-water mixture are discussed. It is found that thermodynamic efficiencies achievable with organic fluid mixtures, under optimum conditions, are lower than those obtained with ammonia-water mixtures. Further, the refrigeration temperatures achievable using organic fluid mixtures are higher than those using ammonia-water mixtures.

Organic Working Fluids for a Combined Power and Cooling Cycle

2005 ◽  
Vol 127 (2) ◽  
pp. 125-130 ◽  
Author(s):  
Sanjay Vijayaraghavan ◽  
D. Y. Goswami
Keyword(s):  
Power Plants ◽  
Thermodynamic Cycle ◽  
Working Fluid ◽  
Water Mixture ◽  
Heat Sources ◽  
Absorption Refrigeration ◽  
Ammonia Water ◽  
Working Fluids ◽  
Fluid Mixtures ◽  
Advantages And Disadvantages

A new thermodynamic cycle has been developed for the simultaneous production of power and cooling from low-temperature heat sources. The proposed cycle combines the Rankine and absorption refrigeration cycles, providing power and cooling as useful outputs. Initial studies were performed with an ammonia-water mixture as the working fluid in the cycle. This work extends the application of the cycle to working fluids consisting of organic fluid mixtures. Organic working fluids have been used successfully in geothermal power plants, as working fluids in Rankine cycles. An advantage of using organic working fluids is that the industry has experience with building turbines for these fluids. A commercially available optimization program has been used to maximize the thermodynamic performance of the cycle. The advantages and disadvantages of using organic fluid mixtures as opposed to an ammonia-water mixture are discussed. It is found that thermodynamic efficiencies achievable with organic fluid mixtures, under optimum conditions, are lower than those obtained with ammonia-water mixtures. Further, the refrigeration temperatures achievable using organic fluid mixtures are higher than those using ammonia-water mixtures.

Ocean Thermal Energy Conversion (OTEC): Choosing a Working Fluid

2009 ◽  
Author(s):  
James H. Anderson
Keyword(s):  
Thermal Energy ◽  
Power Plants ◽  
Thermal Power ◽  
Deep Ocean ◽  
Working Fluid ◽  
Closed Cycle ◽  
Working Fluids ◽  
Advantages And Disadvantages ◽  
Open Cycle ◽  
Ocean Thermal Energy

Ocean thermal energy plants are thermal power plants that use warm ocean surface water as a source of heat and cold seawater from the deep ocean as a heat sink. A historical perspective along with the development of the technology will be presented. A short description describing the subtle differences between OTEC and fossil and nuclear plants will be presented. Open cycle OTEC and closed cycle OTEC will be described with a focus on the influence of choice of working fluid on the design of a plant. Various working fluids could be selected for use in closed cycle OTEC plants. A review and comparison of potential working fluids will address the advantages and disadvantages of the individual fluids. Their characteristics along with a comparison to water as a working fluid in open cycle OTEC will be explained.

Novel Combined Power and Cooling Thermodynamic Cycle for Low Temperature Heat Sources, Part II: Experimental Investigation

2003 ◽  
Vol 125 (2) ◽  
pp. 223-229 ◽  
Author(s):  
Gunnar Tamm ◽  
D. Yogi Goswami
Keyword(s):  
Low Temperature ◽  
System Analysis ◽  
Waste Heat ◽  
Thermal Power ◽  
Experimental System ◽  
Thermodynamic Cycle ◽  
Operating Conditions ◽  
Working Fluid ◽  
Water Mixture ◽  
Theoretical Simulation

A combined thermal power and cooling cycle proposed by Goswami is under intensive investigation, both theoretically and experimentally. The proposed cycle combines the Rankine and absorption refrigeration cycles, producing refrigeration while power is the primary goal. A binary ammonia-water mixture is used as the working fluid. This cycle can be used as a bottoming cycle using waste heat from a conventional power cycle or as an independent cycle using low temperature sources such as geothermal and solar energy. An experimental system was constructed to demonstrate the feasibility of the cycle and to compare the experimental results with the theoretical simulation. Results showed that the vapor generation and absorption condensation processes work experimentally, exhibiting expected trends, but with deviations from ideal and equilibrium modeling. The potential for combined turbine work and refrigeration output was evidenced in operating the system. Analysis of losses showed where improvements could be made, in preparation for further testing over a broader range of operating conditions.

scholarly journals Energetic analysis of a commercial absorption refrigeration unit using an ammonia-water mixture

2017 ◽  
Vol 39 (4) ◽  
pp. 439 ◽  
Author(s):  
Josegil Jorge de Araújo ◽  
Carlos Antonio Cabral dos Santos ◽  
Carlos Almir de Holanda ◽  
João Batista Furlan Duarte ◽  
Alvaro Antonio Villa Ochoa ◽  
...  
Keyword(s):  
Water Mixture ◽  
Absorption Refrigeration ◽  
Ammonia Water ◽  
Refrigeration Unit ◽  
Energetic Analysis

Exergy Analysis of a Combined Power and Refrigeration Thermodynamic Cycle Driven by a Solar Heat Source

2003 ◽  
Vol 125 (1) ◽  
pp. 55-60 ◽  
Author(s):  
Afif Akel Hasan ◽  
D. Y. Goswami
Keyword(s):  
Heat Source ◽  
Exergy Analysis ◽  
Thermodynamic Cycle ◽  
Exergy Efficiency ◽  
Operating Conditions ◽  
Optimum Operating ◽  
Water Mixture ◽  
Exergy Destruction ◽  
Ammonia Water ◽  
Solar Heat

Exergy thermodynamics is employed to analyze a binary ammonia water mixture thermodynamic cycle that produces both power and refrigeration. The analysis includes exergy destruction for each component in the cycle as well as the first law and exergy efficiencies of the cycle. The optimum operating conditions are established by maximizing the cycle exergy efficiency for the case of a solar heat source. Performance of the cycle over a range of heat source temperatures of 320–460°K was investigated. It is found that increasing the heat source temperature does not necessarily produce higher exergy efficiency, as is the case for first law efficiency. The largest exergy destruction occurs in the absorber, while little exergy destruction takes place in the boiler.

Multi-Objective Optimization of a Combined Power and Cooling Cycle for Low-Grade and Midgrade Heat Sources

2012 ◽  
Vol 134 (3) ◽  
Author(s):  
Gokmen Demirkaya ◽  
Saeb Besarati ◽  
Ricardo Vasquez Padilla ◽  
Antonio Ramos Archibold ◽  
D. Yogi Goswami ◽  
...  
Keyword(s):  
Thermodynamic Cycle ◽  
Solution Concentration ◽  
Working Fluid ◽  
Low Grade ◽  
Basic Solution ◽  
Heat Sources ◽  
Fluid Mixture ◽  
Cooling Cycle ◽  
Multi Objective ◽  
First Case

Optimization of thermodynamic cycles is important for the efficient utilization of energy sources; indeed, it is more crucial for the cycles utilizing low-grade heat sources where the cycle efficiencies are smaller compared to high temperature power cycles. This paper presents the optimization of a combined power/cooling cycle, also known as the Goswami cycle, which combines the Rankine and absorption refrigeration cycles. The cycle uses a special binary fluid mixture as the working fluid and produces a power and refrigeration. In this regard, multi-objective genetic algorithms (GAs) are used for Pareto approach optimization of the thermodynamic cycle. The optimization study includes two cases. In the first case, the performance of the cycle is evaluated as it is used as a bottoming cycle and in the second case, as it is used as a top cycle utilizing solar energy or geothermal sources. The important thermodynamic objectives that have been considered in this work are, namely, work output, cooling capacity, effective first law, and exergy efficiencies. Optimization is carried out by varying the selected design variables, such as boiler temperature and pressure, rectifier temperature, and basic solution concentration. The boiler temperature is varied between 70–150 °C and 150–250 °C for the first and the second cases, respectively.

A Novel Combined Power and Cooling Thermodynamic Cycle for Low Temperature Heat Sources: Part II — Experimental Investigation

Solar Energy ◽  
2002 ◽  
Author(s):  
Gunmar Tamm ◽  
D. Yogi Goswami
Keyword(s):  
Low Temperature ◽  
System Analysis ◽  
Waste Heat ◽  
Thermal Power ◽  
Experimental System ◽  
Thermodynamic Cycle ◽  
Working Fluid ◽  
Water Mixture ◽  
Theoretical Simulation ◽  
Intensive Investigation

A combined thermal power and cooling cycle proposed by Goswami is under intensive investigation, both theoretically and experimentally. The proposed cycle combines the Rankine and absorption refrigeration cycles, producing refrigeration while power is the primary goal. A binary ammonia-water mixture is used as the working fluid. This cycle can be used as a bottoming cycle using waste heat from a conventional power cycle or an independent cycle using low temperature sources such as geothermal and solar energy. An experimental system was constructed to demonstrate the feasibility of the cycle and to compare the experimental results with the theoretical simulation. Results showed that the vapor generation and absorption condensation processes work experimentally, exhibiting expected trends, but with deviations from ideal and equilibrium modeling. The potential for combined turbine work and refrigeration output was evidenced in operating the system. Analysis of losses showed where improvements could be made, in preparation for further testing over a broader range of operating parameters.

Heat Transfer Analysis of Regenerative Thermo-Mechanical Refrigeration System

2020 ◽  
Author(s):  
Ahmad K. Sleiti ◽  
Mohammed Al-Khawaja
Keyword(s):  
Environmental Effects ◽  
Power Efficiency ◽  
Power Plants ◽  
Internal Combustion Engines ◽  
Waste Heat ◽  
Heat Transfer Analysis ◽  
Working Fluid ◽  
Refrigeration System ◽  
Renewable Energy Resources ◽  
Working Fluids

Abstract Refrigeration systems contribute to the critical environmental concerns including global warming and ozone depletion. It is necessary to develop new systems that use renewable energy resources and waste heat to perform the cooling function with eco-friendly working fluids. This improves the energy efficiency of the power systems and minimizes the harmful effects of conventional refrigeration systems. This paper introduces an analysis of a regenerative thermo-mechanical refrigeration system that is powered with renewable heat sources (solar, geothermal) or waste heat (from internal combustion engines, gas power plants, and steam power plants). The system operates at the supercritical conditions of the working fluids. The performance of the system is evaluated based on power efficiency, the COP, and the expander-compressor diameters. Also, a number of working fluids were compared with each other based on their performance and environmental effects. There is a trade-off between high-performance fluids and their environmental effects. Using R32 as a working fluid at Th = 150 °C and Tc1 = 40 °C, the system produces a cooling capacity of 1 kW with power efficiency of 10.23%, expander diameter of 53.12 mm and compressor diameter of 75.4mm. The regenerator increases the power efficiency by about 1%. However, the size of the regenerator is small (Dr = 6.5 mm, Lr = 142 mm].

Systematic Fluid Selection for Organic Rankine Cycles and Performance Analysis for a Combined High and Low Temperature Cycle

2015 ◽  
Vol 138 (3) ◽  
Author(s):  
Maximilian Roedder ◽  
Matthias Neef ◽  
Christoph Laux ◽  
Klaus-P. Priebe
Keyword(s):  
Performance Analysis ◽  
Low Temperature ◽  
Power Plants ◽  
Waste Heat ◽  
Selection Process ◽  
Working Fluid ◽  
Temperature Cycle ◽  
Two Stage ◽  
Working Fluids ◽  
Wide Range

The organic Rankine cycle (ORC) is an established thermodynamic process that converts waste heat to electric energy. Due to the wide range of organic working fluids available the fluid selection adds an additional degree-of-freedom to the early design phase of an ORC process. Despite thermodynamic aspects such as the temperature level of the heat source, other technical, economic, and safety aspects have to be considered. For the fluid selection process in this paper, 22 criteria were identified in six main categories while distinguishing between elimination (EC) and tolerance criteria (TC). For an ORC design, the suggested method follows a practical engineering approach and can be used as a structured way to limit the number of interesting working fluids before starting a detailed performance analysis of the most promising candidates. For the first time, the selection process is applied to a two-stage reference cycle, which uses the waste heat of a large reciprocating engine for cogeneration power plants. It consists of a high temperature (HT) and a low temperature (LT) cycle in which the condensation heat of the HT cycle provides the heat input of the LT cycle. After the fluid selection process, the detailed thermodynamic cycle design is carried out with a thermodynamic design tool that also includes a database for organic working fluids. The investigated ORC cycle shows a net thermal efficiency of about 17.4% in the HT cycle with toluene as the working fluid and 6.2% in LT cycle with isobutane as the working fluid. The electric efficiency of the cogeneration plant increases from 40.4% to 46.97% with the both stages of the two-stage ORC in operation.

Sign in / Sign up

Export Citation Format

Share Document