Structural Integrity Evaluation of Reactor Pressure Vessels During PTS Events Using Deterministic and Probabilistic Fracture Mechanics Analysis

2013 ◽  
Author(s):  
Kazuya Osakabe ◽  
Hiroyuki Nishikawa ◽  
Koichi Masaki ◽  
Jinya Katsuyama ◽  
Kunio Onizawa
Keyword(s):  
Fracture Mechanics ◽  
Structural Reliability ◽  
Structural Integrity ◽  
Probabilistic Approach ◽  
Crack Size ◽  
Initial Crack ◽  
Pressure Vessels ◽  
Probabilistic Fracture Mechanics ◽  
Main Steam Line ◽  
Main Steam

To assess the structural integrity of reactor vessels (RVs) during pressurized thermal shock (PTS) events, a deterministic fracture mechanics (DFM) approach has been widely used such as the procedure in JEAC4206-2007. On the other hand, the application of a probabilistic fracture mechanics (PFM) analysis method for the structural reliability assessment of RV has become attractive recently because uncertainties related to input parameters can be incorporated rationally. The probabilistic approach has already been adopted as the regulation on fracture toughness requirements against PTS events in the U.S. In this paper, in order to verify the applicability of a PFM method to JEAC4206-2007, deterministic and probabilistic analyses have been performed, and the effects of initial crack size defined in JEAC4206-2007 on the temperature margin obtained from DFM and the probability of crack initiation obtained from PFM have been evaluated. With regard to the PTS event variation, a stuck open valve scenario (SO) has been considered in addition to large- and small-break loss of coolant accident (LBLOCA, SBLOCA) and main steam line break (MSLB).

Verification of Probabilistic Fracture Mechanics Analysis Code for Reactor Pressure Vessel

2021 ◽  
Vol 143 (4) ◽  
Author(s):  
Yinsheng Li ◽  
Genshichiro Katsumata ◽  
Koichi Masaki ◽  
Shotaro Hayashi ◽  
Yu Itabashi ◽  
...  
Keyword(s):  
Fracture Mechanics ◽  
Working Group ◽  
Power Plants ◽  
Structural Integrity ◽  
Pressure Vessels ◽  
Irradiation Embrittlement ◽  
Energy Agency ◽  
Probabilistic Fracture Mechanics ◽  
Integrity Assessments ◽  
Reactor Pressure

Abstract Nowadays, it has been recognized that probabilistic fracture mechanics (PFM) is a promising methodology in structural integrity assessments of aged pressure boundary components of nuclear power plants, because it can rationally represent the influencing parameters in their inherent probabilistic distributions without over conservativeness. A PFM analysis code PFM analysis of structural components in aging light water reactor (PASCAL) has been developed by the Japan Atomic Energy Agency to evaluate the through-wall cracking frequencies of domestic reactor pressure vessels (RPVs) considering neutron irradiation embrittlement and pressurized thermal shock (PTS) transients. In addition, efforts have been made to strengthen the applicability of PASCAL to structural integrity assessments of domestic RPVs against nonductile fracture. A series of activities has been performed to verify the applicability of PASCAL. As a part of the verification activities, a working group was established with seven organizations from industry, universities, and institutes voluntarily participating as members. Through one-year activities, the applicability of PASCAL for structural integrity assessments of domestic RPVs was confirmed with great confidence. This paper presents the details of the verification activities of the working group, including the verification plan, approaches, and results.

The Inclusion of Inner Surface Breaking Flaws in Probabilistic Fracture Mechanics Analyses of Reactor Vessels Subjected to Planned Normal Cool-Down Transients

2008 ◽  
Author(s):  
Terry Dickson ◽  
Mark EricksonKirk
Keyword(s):  
Fracture Mechanics ◽  
Nuclear Reactor ◽  
Structural Integrity ◽  
Nuclear Regulatory Commission ◽  
The United States ◽  
Pressure Vessels ◽  
Probabilistic Fracture Mechanics ◽  
Inner Surface ◽  
Regulatory Commission ◽  
Technical Basis

The current regulations, as set forth by the United States Nuclear Regulatory Commission (NRC), to insure that light-water nuclear reactor pressure vessels (RPVs) maintain their structural integrity when subjected to planned reactor startup (heat-up) and shutdown (cool-down) transients are specified in Appendix G to 10 CFR Part 50, which incorporates by reference Appendix G to Section XI of the ASME Code. The technical basis for these regulations contains many aspects that are now broadly recognized by the technical community as being unnecessarily conservative and some plants are finding it increasingly difficult to comply with the current regulations. Consequently, a goal of current NRC research is to derive a technical basis for a risk-informed revision to the current requirements that reduces the conservatism and also is consistent with the methods previously used to develop a risk-informed revision to the regulations for accidental transients such as pressurized thermal shock (PTS). Previous publications have been successful in illustrating potential methods to provide a risk-informed relaxation to the current regulations for normal transients. Thus far, probabilistic fracture mechanics (PFM) analyses have been performed at 60 effective full power years (EFPY) for one of the reactors evaluated as part of the PTS re-evaluation project. In these previous analyses / publications, consistent with the assumptions utilized for this particular reactor in the PTS re-evaluation, all flaws for this reactor were postulated to be embedded. The objective of this paper is to review the analysis results and conclusions from previous publications on this subject and to attempt to modify / generalize these conclusions to include RPVs postulated to contain only inner-surface breaking flaws or a combination of embedded flaws and inner-surface breaking flaws.

Estimation of Through-Wall Cracking Frequency of RPV Under PTS Events Using PFM Analysis Method for Identifying Conservatism Included in Current Japanese Code

2014 ◽  
Author(s):  
Kazuya Osakabe ◽  
Koichi Masaki ◽  
Jinya Katsuyama ◽  
Genshichiro Katsumata ◽  
Kunio Onizawa
Keyword(s):  
Fracture Toughness ◽  
Fracture Mechanics ◽  
Crack Initiation ◽  
Structural Integrity ◽  
Probabilistic Approach ◽  
Pressure Vessels ◽  
Assessment Procedure ◽  
Analysis Method ◽  
Integrity Assessment ◽  
The U.S

To assess the structural integrity of reactor pressure vessels (RPVs) during pressurized thermal shock (PTS) events, the deterministic fracture mechanics approach prescribed in Japanese code JEAC 4206-2007 [1] has been used in Japan. The structural integrity is judged to be maintained if the stress intensity factor (SIF) at the crack tip during PTS events is smaller than fracture toughness KIc. On the other hand, the application of a probabilistic fracture mechanics (PFM) analysis method for the structural reliability assessment of pressure components has become attractive recently because uncertainties related to influence parameters can be incorporated rationally. A probabilistic approach has already been adopted as the regulation on fracture toughness requirements against PTS events in the U.S. According to the PFM analysis method in the U.S., through-wall cracking frequencies (TWCFs) are estimated taking frequencies of event occurrence and crack arrest after crack initiation into consideration. In this study, in order to identify the conservatism in the current RPV integrity assessment procedure in the code, probabilistic analyses on TWCF have been performed for certain model of RPVs. The result shows that the current assumption in JEAC 4206-2007, that a semi-elliptic axial crack is postulated on the inside surface of RPV wall, is conservative as compared with realistic conditions. Effects of variation of PTS transients on crack initiation frequency and TWCF have been also discussed.

Verification of Probabilistic Fracture Mechanics Analysis Code PASCAL

2017 ◽  
Author(s):  
Yinsheng Li ◽  
Genshichiro Katsumata ◽  
Koichi Masaki ◽  
Shotaro Hayashi ◽  
Yu Itabashi ◽  
...  
Keyword(s):  
Fracture Mechanics ◽  
Working Group ◽  
Nuclear Power ◽  
Power Plants ◽  
Structural Integrity ◽  
Pressure Vessels ◽  
Irradiation Embrittlement ◽  
Energy Agency ◽  
Probabilistic Fracture Mechanics ◽  
Integrity Assessments

Probabilistic fracture mechanics (PFM) has been recognized as a promising methodology in structural integrity assessments of aged pressure boundary components of nuclear power plants because it can rationally represent the influencing parameters in their inherent probabilistic distributions without over conservativeness. In Japan, a PFM analysis code PASCAL (PFM Analysis of Structural Components in Aging LWR) has been developed by the Japan Atomic Energy Agency (JAEA) to evaluate the through-wall cracking frequencies of Japanese reactor pressure vessels (RPVs) considering neutron irradiation embrittlement and pressurized thermal shock (PTS) transients. In addition, efforts have been made to strengthen the applicability of PASCAL to structural integrity assessments of domestic RPVs against non-ductile fracture. On the other hand, unlike deterministic analysis codes, the verification of PFM analysis codes is not easy. A series of activities has been performed to verify the applicability of PASCAL. In this study, as a part of the verification activities, a working group was established in Japan, with seven organizations from industry, universities and institutes voluntarily participating as members. Through one year activities, the applicability of PASCAL for structural integrity assessments of domestic RPVs was confirmed with great confidence. This paper presents the details of the verification activities of the working group including the verification plan, approaches and results.

An Improved Method for Postulating Fabrication Flaws in Reactor Pressure Vessels for Structural Integrity Evaluation

2002 ◽  
Author(s):  
F. A. Simonen ◽  
T. L. Dickson
Keyword(s):  
Fracture Mechanics ◽  
Structural Integrity ◽  
National Laboratory ◽  
Pacific Northwest National Laboratory ◽  
Nuclear Regulatory Commission ◽  
The United States ◽  
Pressure Vessels ◽  
Probabilistic Fracture Mechanics ◽  
Inner Surface ◽  
Reactor Pressure

This paper presents an improved model for postulating fabrication flaws in reactor pressure vessels (RPVs) and for the treatment of measured flaw data by probabilistic fracture mechanics (PFM) codes that are used for structural integrity evaluations. The model used to develop the current pressurized thermal shock (PTS) regulations conservatively postulated that all fabrication flaws were inner-surface breaking flaws. To reduce conservatisms and uncertainties in flaw-related inputs, the United States Nuclear Regulatory Commission (USNRC) has supported research at Pacific Northwest National Laboratory (PNNL) that has resulted in data on fabrication flaws from non-destructive and destructive examinations of actual RPV material. Statistical distributions have been developed to characterize the number and sizes of flaws in the various material regions of a vessel. The regions include the main seam welds, repair welds, base metal of plates and forgings, and the cladding that is applied to the inner surface of the vessel. Flaws are also characterized as being located within the interior of these regions or along the weld fusion lines that join the regions. Flaws are taken that occur at random locations relative to the embrittled inner region of the vessel. The probabilistic fracture mechanics model associates each of the simulated flaw types with the fracture properties of the region being addressed.

Probabilistic Fracture Mechanics Structural Reliability Analysis of Reeled Pipes

2006 ◽  
Author(s):  
Hugo A. Ernst ◽  
Ricardo Schifini ◽  
Richard E. Bravo ◽  
Diego N. Passarella ◽  
Federico Daguerre ◽  
...  
Keyword(s):  
Fracture Mechanics ◽  
Reliability Analysis ◽  
Structural Reliability ◽  
Crack Size ◽  
Probability Of Failure ◽  
Statistical Distribution ◽  
Assessment Procedure ◽  
Statistical Distributions ◽  
Probabilistic Fracture Mechanics ◽  
Structural Reliability Analysis

Structural integrity analyses are used to guarantee the reliability of critical engineering components under certain conditions of interest. In general, the involved parameters have statistical distributions. Choosing a single set of values for the parameters of interest does not show the real statistical distribution of the output parameters. In particular, offshore pipes installation by reeling is a matter of concern due to the severe conditions of the process. Since it is necessary to guarantee the integrity of the pipes, a probabilistic fracture mechanics reliability analysis seems to be the most adequate approach. In this work, a probabilistic fracture mechanics assessment approach to perform the structural reliability analysis of tubes subjected to a reeling process was developed. This procedure takes into account the statistical distributions of the material properties and pipe geometry, using a fracture mechanics approach and the Monte Carlo method. Two-parameter Weibull distributions were used to model the variability of the input parameters. The assessment procedure was implemented as a self-contained executable program. The program outputs are: the statistical distribution of critical crack size, amount of crack extension, final crack size and the cumulative probability of failure for a given crack size. A particular case of interest was studied; a seamless tube - OD 323.9 × wt 14.3 mm, was analyzed. Tolerable defect size limits (defect depth vs. defect length curves) for different probability of failure levels were obtained. A sensitivity analysis was performed; the effect of material fracture toughness and misalignment was studied.

Development of Crack Evaluation Models for Probabilistic Fracture Mechanics Analyses of Japanese Reactor Pressure Vessels

2018 ◽  
Author(s):  
Kai Lu ◽  
Koichi Masaki ◽  
Jinya Katsuyama ◽  
Yinsheng Li
Keyword(s):  
Fracture Mechanics ◽  
Structural Integrity ◽  
Pressure Vessels ◽  
Sensitivity Analyses ◽  
Irradiation Embrittlement ◽  
Integrity Assessment ◽  
Probabilistic Fracture Mechanics ◽  
Failure Frequency ◽  
Evaluation Models ◽  
Reactor Pressure

In Japan, a probabilistic fracture mechanics (PFM) analysis code PASCAL has been developed by Japan Atomic Energy Agency for structural integrity assessment of reactor pressure vessels (RPVs). The most recent release is PASCAL Version 4 (hereafter, PSACAL4) which can be used to evaluate the failure frequency of RPVs considering neutron irradiation embrittlement and pressurized thermal shock events. For the integrity assessment of RPVs, development of crack evaluation models is important. In this study, finite element analyses are performed firstly to verify the stress intensity factor calculations of cracks in PASCAL4. In addition, the applicability of the crack evaluation models in PASCAL4 such as the location of embedded cracks, crack shape and depth of surface cracks, and the increment of crack propagation is investigated. Based on sensitivity analyses of crack evaluation models for Japanese RPVs using PASCAL4, the effects of these evaluation models on failure frequency are clarified. From the analysis results, crack evaluation models recommended to the failure frequency evaluation for a Japanese model RPV are discussed.

Guideline on Probabilistic Fracture Mechanics Analysis for Japanese Reactor Pressure Vessels

2017 ◽  
Author(s):  
Jinya Katsuyama ◽  
Kazuya Osakabe ◽  
Shumpei Uno ◽  
Yinsheng Li ◽  
Shinobu Yoshimura
Keyword(s):  
Fracture Mechanics ◽  
Neutron Irradiation ◽  
Structural Integrity ◽  
The United States ◽  
Pressure Vessels ◽  
Irradiation Embrittlement ◽  
Integrity Assessment ◽  
Probabilistic Fracture Mechanics ◽  
Failure Frequency ◽  
Reactor Pressure

In Japan, to prevent nil-ductile fracture of reactor pressure vessels (RPVs) due to neutron irradiation embrittlement, deterministic fracture mechanics evaluation in accordance with the standards developed by the Japan Electric Association is performed for assessing the structural integrity of RPVs under pressurized thermal shock (PTS) events considering neutron irradiation embrittlement. In recent years, a structural integrity assessment methodology based on probabilistic fracture mechanics (PFM) has been introduced into the regulations in the United States and a few European countries. PFM is a rational methodology for evaluating the failure frequency of important pressure boundary components by considering the statistical distributions of various influence factors related to ageing due to the long-term operation. At Japan Atomic Energy Agency (JAEA), a PFM analysis code called PASCAL has been developed to evaluate the failure frequency of RPVs considering neutron irradiation embrittlement and PTS events. In addition, JAEA has developed a guideline for the PFM based structural integrity assessment of RPVs to promote the applicability of PFM in Japan and achieve the objective that an engineer/analyst who familiar with the fracture mechanics to perform PFM analyses and evaluate through-wall cracking frequency (TWCF) of RPVs easily. The guideline consists of a main body (general requirements), explanation (guidance), and several supplements. The technical basis for PFM analysis is also provided, and the new information and better fracture mechanics models are included in the guideline. In this paper, an overview of the guideline and some typical analysis results obtained based on the guideline and the Japanese database related to PTS evaluation are presented.

Improvements on Evaluation Functions of a Probabilistic Fracture Mechanics Analysis Code for Reactor Pressure Vessels

2019 ◽  
Vol 142 (2) ◽  
Author(s):  
Kai Lu ◽  
Jinya Katsuyama ◽  
Yinsheng Li
Keyword(s):  
Fracture Mechanics ◽  
Structural Integrity ◽  
Evaluation Model ◽  
Pressure Vessels ◽  
Irradiation Embrittlement ◽  
Integrity Assessment ◽  
Probabilistic Fracture Mechanics ◽  
Warm Prestressing ◽  
Evaluation Functions ◽  
Reactor Pressure

Abstract In Japan, a probabilistic fracture mechanics (PFM) analysis code PASCAL was developed for structural integrity assessment of reactor pressure vessels (RPVs) considering neutron irradiation embrittlement and pressurized thermal shock (PTS) events. By reflecting the latest knowledge and findings, the evaluation functions are continuously improved and have been incorporated into PASCAL4 which is the most recent version of the PASCAL code. In this paper, the improvements made in PASCAL4 are explained in detail, such as the evaluation model of warm prestressing (WPS) effect, evaluation function of confidence levels for PFM analysis results by considering the epistemic and aleatory uncertainties in probabilistic variables, the recent stress intensity factor (KI) solutions, and improved methods for KI calculations when considering complicated stress distributions. Moreover, using PASCAL4, PFM analysis examples considering these improvements are presented.

Sign in / Sign up

Export Citation Format

Share Document