Scanning laser optical tomography: a highly efficient volumetric imaging technique for mesoscopic specimens

Author(s):  
H. Meyer ◽  
G. Antonopoulos ◽  
M. Heidrich ◽  
R.-A. Lorbeer ◽  
M. Kellner ◽  
...  
2021 ◽  
Author(s):  
Wenjun Shao ◽  
Ji Yi

Three-dimensional (3D) volumetric imaging of the human retina is instrumental to monitor and diagnose blinding conditions. Although coherent retinal imaging is well established by optical coherence tomography, it is still a large void for incoherent volumetric imaging in the human retina. Here, we report confocal oblique scanning laser ophthalmoscopy (CoSLO), to fill that void and harness incoherent optical contrast in 3D. CoSLO uses oblique scanning laser and remote focusing to acquire depth signal in parallel, avoid the lengthy z-stacking, and image a large field of view (FOV). In addition, confocal gating is introduced by a linear sensor array to improve the contrast and resolution. For the first time, we achieved incoherent 3D human retinal imaging with >20° viewing angle within only 5 seconds. The depth resolution is ~45 microns in vivo. We demonstrated label-free incoherent contrast by CoSLO, revealing unique features in the retina. CoSLO will be an important technique for clinical care of retinal conditions and fundamental vision science, by offering unique volumetric incoherent contrasts.


The aim of retinal imaging techniques is visualization of morphological changes at the cellular and tissue level. Various techniques are used for this purpose. The scanning laser ophthalmoscopy (SLO), a retinal optical imaging device based on standard scanning laser microscopy is an imaging technique that scans the fundus with a highly collimated narrow laser beam and measures the backscattered light intensity. Here, progress on developing SLO instruments and their applications in ophthalmology are reviewed.


HNO ◽  
2019 ◽  
Vol 67 (S2) ◽  
pp. 69-76
Author(s):  
J. Schulze ◽  
L. Nolte ◽  
S. Lyutenski ◽  
N. Tinne ◽  
D. Heinemann ◽  
...  

Lab on a Chip ◽  
2019 ◽  
Vol 19 (4) ◽  
pp. 550-561 ◽  
Author(s):  
Adem Polat ◽  
Shabir Hassan ◽  
Isa Yildirim ◽  
Luis Eduardo Oliver ◽  
Maryam Mostafaei ◽  
...  

Volumetric optical microscopy approaches that enable acquisition of three-dimensional (3D) information from a biological sample are attractive for numerous non-invasive imaging applications.


2016 ◽  
Vol 110 (3) ◽  
pp. 165a ◽  
Author(s):  
Simon P. Poland ◽  
James A. Levitt ◽  
Nikola Krstajić ◽  
Ahmet Erdogen ◽  
Richard J. Walker ◽  
...  

2011 ◽  
Vol 04 (03) ◽  
pp. 309-323 ◽  
Author(s):  
CHAO-WEI CHEN ◽  
YU CHEN

Laminar optical tomography (LOT) is a mesoscopic tomographic imaging technique ranging between confocal microscopy and diffuse optical tomography (DOT). Fluorescence LOT (FLOT) provides depth-resolved molecular information with 100–200 μm resolution over 2–3 mm depth. In this study, we use Monte Carlo simulation and singular-value analysis (SVA) to optimize the source-detector configurations for potential enhancement of FLOT imaging performance. The effects of different design parameters, including source incidence and detector collection angles, detector number, and sampling density, are presented. The results indicate that angled incidence/detection configuration might improve the imaging resolution and depth sensitivity, especially for low-scattering medium. Increasing the number of detectors and the number of scanning steps will also result in enhanced imaging performance. We also demonstrate that the optimal imaging performance depends upon the background scattering coefficient. Our result might provide an optimization strategy for FLOT or LOT experimental setup.


2011 ◽  
Author(s):  
T. Hayashi ◽  
M. Murase ◽  
T. Kitayama ◽  
Donald O. Thompson ◽  
Dale E. Chimenti

PLoS ONE ◽  
2012 ◽  
Vol 7 (7) ◽  
pp. e41236 ◽  
Author(s):  
René Eickhoff ◽  
Raoul-Amadeus Lorbeer ◽  
Hannah Scheiblich ◽  
Alexander Heisterkamp ◽  
Heiko Meyer ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document