Long-range all-solid-state flash LiDAR sensor for autonomous driving

Author(s):  
Juha Lemmetti ◽  
Niklas Sorri ◽  
Ilkka Kallioniemi ◽  
Petri Melanen ◽  
Petteri Uusimaa
Author(s):  
Hyun Choi ◽  
Wan-Chin Kim

Mechaless LiDAR technology, which does not have a mechanical drive part, has been actively studied in order to increase the reliability of the LiDAR device at low cost and drive environment in order to more actively apply LiDAR technology to autonomous driving. Mechaless LiDAR technology, which has been mainly studied recently, includes 3D Flash LiDAR technology, MEMS mirror utilization method, and OPA (Optical Phased Array). However, these methods have not been developed rapidly as a key technology for achieving autonomous driving due to low stability of driving environment or remarkably low measurable distance and FOV (field of view) compared with mechanical LiDAR. In this study, we investigated the improvement of FOV by using a flux-deflecting liquid lens and a fisheye lens that can achieve fine spatial resolution through continuous voltage regulation. Based on the initial design results, it was examined that the FOV can be secured to 80 ° or more by utilizing a relatively simple fisheye lens composed of only spherical lenses.


2010 ◽  
Vol 132 (6) ◽  
pp. 1734-1735 ◽  
Author(s):  
Alexander K. L. Yuen ◽  
Olivier Lafon ◽  
Thibault Charpentier ◽  
Myriam Roy ◽  
Francine Brunet ◽  
...  

1995 ◽  
Vol 413 ◽  
Author(s):  
Christoph Weder ◽  
Michael J. Wagner ◽  
Mark S. Wrighton

ABSTRACTIn an effort to better understand the relationship between molecular structure and photophysical properties, we have prepared and investigated a series of novel poly(2,5-dialkoxy-p-phenyleneethynylene)s. Wide angle X-ray diffraction measurements show that the supramolecular structure can be easily and significantly influenced by the nature of substituents covalently linked to the rigid-rod polymer main chains. Polymers which have sterically hindered side chains are essentially amorphous, while those with only linear side chains can form lamellar structures with a significant degree of long-range order. High photoluminescence quantum yields, up to 0.86 in solution and 0.36 in the solid state, have been measured. While the solution quantum yields are independent of the functionalization, solid state quantum efficiencies were found to be related to the degree of long-range order in the samples. In samples with a high degree of long-range order, the close proximity of the coplanar oriented polymer backbones is assumed to lead to the formation of eximer complexes which provide non emissive decay channels and, hence, result in comparable low photoluminescence quantum yields. In samples that adopt only a small extent of long-range order, the rigid-rod conjugated polymer backbones behave as if they were ‘dissolved’ in a hydrocarbon solvent and consequently high quantum efficiencies are obtained. Preliminary results indicate the suitability of these polymers as the emitting layer in electroluminescent devices.


2020 ◽  
Vol 76 (2) ◽  
pp. 137-144
Author(s):  
Zhanbing He ◽  
Yihan Shen ◽  
Haikun Ma ◽  
Junliang Sun ◽  
Xiuliang Ma ◽  
...  

Quasicrystals, which have long-range orientational order without translational symmetry, are incompatible with the theory of conventional crystals, which are characterized by periodic lattices and uniformly repeated unit cells. Reported here is a novel quasicrystal-related solid state observed in two Al–Cr–Fe–Si alloys, which can be described as a mosaic of aperiodically distributed unit tiles in translationally periodic structural blocks. This new type of material possesses the opposing features of both conventional crystals and quasicrystals, which might trigger wide interest in theory, experiments and the potential applications of this type of material.


Sign in / Sign up

Export Citation Format

Share Document