GPU-parallel performance of the community radiative transfer model (CRTM) with the optical depth in absorber space (ODAS)-based transmittance algorithm

2012 ◽  
Author(s):  
Jarno Mielikainen ◽  
Bormin Huang ◽  
Hung-Lung A. Huang ◽  
Tsengdar Lee
Keyword(s):  
Radiative Transfer ◽  
Optical Depth ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Parallel Performance

scholarly journals Coupling sky images with three-dimensional radiative transfer models: a new method to estimate cloud optical depth

2015 ◽  
Vol 8 (10) ◽  
pp. 11285-11321 ◽  
Author(s):  
F. A. Mejia ◽  
B. Kurtz ◽  
K. Murray ◽  
L. M. Hinkelman ◽  
M. Sengupta ◽  
...  
Keyword(s):  
Radiative Transfer ◽  
Optical Depth ◽  
Zenith Angle ◽  
Microwave Radiometer ◽  
Three Dimensional ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Cloud Detection ◽  
Cloud Optical Depth ◽  
Direct Normal Irradiance

Abstract. A method for retrieving cloud optical depth (τc) using a ground-based sky imager (USI) is presented. The Radiance Red-Blue Ratio (RRBR) method is motivated from the analysis of simulated images of various τc produced by a 3-D Radiative Transfer Model (3DRTM). From these images the basic parameters affecting the radiance and RBR of a pixel are identified as the solar zenith angle (θ0), τc, solar pixel angle/scattering angle (ϑs), and pixel zenith angle/view angle (ϑz). The effects of these parameters are described and the functions for radiance, Iλ(τc, θ0, ϑs, ϑz) and the red-blue ratio, RBR(τc, θ0, ϑs, ϑz) are retrieved from the 3DRTM results. RBR, which is commonly used for cloud detection in sky images, provides non-unique solutions for τc, where RBR increases with τc up to about τc = 1 (depending on other parameters) and then decreases. Therefore, the RRBR algorithm uses the measured Iλmeas(ϑs, ϑz), in addition to RBRmeas(ϑs, ϑz) to obtain a unique solution for τc. The RRBR method is applied to images taken by a USI at the Oklahoma Atmospheric Radiation Measurement program (ARM) site over the course of 220 days and validated against measurements from a microwave radiometer (MWR); output from the Min method for overcast skies, and τc retrieved by Beer's law from direct normal irradiance (DNI) measurements. A τc RMSE of 5.6 between the Min method and the USI are observed. The MWR and USI have an RMSE of 2.3 which is well within the uncertainty of the MWR. An RMSE of 0.95 between the USI and DNI retrieved τc is observed. The procedure developed here provides a foundation to test and develop other cloud detection algorithms.

scholarly journals A new gas absorption optical depth parameterisation for RTTOV version 13

2021 ◽  
Vol 14 (5) ◽  
pp. 2899-2915
Author(s):  
James Hocking ◽  
Jérôme Vidot ◽  
Pascal Brunel ◽  
Pascale Roquet ◽  
Bruna Silveira ◽  
...  
Keyword(s):  
Solar Radiation ◽  
Radiative Transfer ◽  
Optical Depth ◽  
Weather Prediction ◽  
Current Approach ◽  
Gas Absorption ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Wide Range ◽  
Microwave Radiances

Abstract. This paper describes a new gas optical depth parameterisation implemented in the most recent release, version 13, of the radiative transfer model RTTOV (Radiative Transfer for TOVS). RTTOV is a fast, one-dimensional radiative transfer model for simulating top-of-atmosphere visible, infrared, and microwave radiances observed by downward-viewing space-borne passive sensors. A key component of the model is the fast parameterisation of absorption by the various gases in the atmosphere. The existing parameterisation in RTTOV has been extended over many years to allow for additional variable gases in RTTOV simulations and to account for solar radiation and better support geostationary sensors by extending the validity to higher zenith angles. However, there are limitations inherent in the current approach which make it difficult to develop it further, for example by adding new variable gases. We describe a new parameterisation that can be applied across the whole spectrum, that allows for a wide range of zenith angles in support of solar radiation and geostationary sensors, and for which it will be easier to add new variable gases in support of user requirements. Comparisons against line-by-line radiative transfer simulations and against observations in the ECMWF operational system yield promising results, suggesting that the new parameterisation generally compares well with the old one in terms of accuracy. Further validation is planned, including testing in operational numerical weather prediction data assimilation systems.

scholarly journals Computation of longwave radiative flux and vertical heating rate with 4A-Flux v1.0 as integral part of the radiative transfer code 4A/OP v1.5

2021 ◽  
Author(s):  
Yoann Tellier ◽  
Cyril Crevoisier ◽  
Raymond Armante ◽  
Jean-Louis Dufresne ◽  
Nicolas Meilhac
Keyword(s):  
Radiative Transfer ◽  
Heating Rate ◽  
Optical Depth ◽  
Radiative Forcing ◽  
Specular Reflection ◽  
Radiative Flux ◽  
High Spectral Resolution ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Very High

Abstract. Based on advanced spectroscopic databases, line-by-line and layer-by-layer radiative transfer codes numerically solve the radiative transfer equation with a very high accuracy. Taking advantage of its pre-calculated optical depth look-up table, the fast and accurate radiative transfer model Automatized Atmospheric Absorption Atlas OPerational (4A/OP) calculates the transmission and radiance spectra for a user defined layered atmospheric model. Here we present a module, called 4A-Flux, developed and implemented into 4A/OP in order to include the calculation of the clear-sky longwave radiative flux profiles and heating rate profiles at a very high spectral resolution. Calculations are performed under the assumption of local thermodynamic equilibrium, plane-parallel atmosphere and specular reflection on the surface. The computation takes advantage of pre-tabulated exponential integral functions that are used instead of a classic angular quadrature. Furthermore, the sublayer variation of the Planck function is implemented to better represent the emission of layers with a high optical depth. Thanks to the implementation of 4A-Flux, 4A/OP model have participated in the Radiative Forcing Model Intercomparison Project (RFMIP-IRF) along with other state-of-the-art radiative transfer models. 4A/OP hemispheric flux profiles are compared to other models over the 1800 representative atmospheric situations of RFMIP, yielding an Outgoing Longwave Radiation (OLR) mean difference between 4A/OP and other models of −0.148 W .m−2 and a mean standard deviation of 0.218 W .m−2, showing a good agreement between 4A/OP and other models. 4A/OP is applied to the Thermodynamic Initial Guess Retrieval (TIGR) atmospheric database to analyze the response of the OLR and vertical heating rate to several perturbations of temperature or gas concentration. This work shows that 4A/OP with 4A-Flux module can successfully be used to simulate accurate flux and heating rate profiles and provide useful sensitivity studies including sensitivities to minor trace gases such as HFC134a, HCFC22 and CFC113. We also highlight the interest for the modeling community to extend intercomparison between models to comparisons between spectroscopic databases and modelling to improve the confidence in model simulations.

scholarly journals Atmospheric effects of volcanic eruptions as seen by famous artists and depicted in their paintings

2007 ◽  
Vol 7 (2) ◽  
pp. 5145-5172 ◽  
Author(s):  
C. S. Zerefos ◽  
V. T. Gerogiannis ◽  
D. Balis ◽  
S. C. Zerefos ◽  
A. Kazantzidis
Keyword(s):  
Time Series ◽  
Radiative Transfer ◽  
Aerosol Optical Depth ◽  
Optical Depth ◽  
Volcanic Eruptions ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Atmospheric Effects ◽  
Middle Latitudes ◽  
Time Period

Abstract. Paintings created by famous artists, representing sunsets throughout the period 1500–1900, provide proxy information on the aerosol optical depth following major volcanic eruptions. This is supported by a statistically significant correlation coefficient (0.8) between the measured red-to-green ratios of 327 paintings and the corresponding values of the dust veil index. A radiative transfer model was used to compile an independent time series of aerosol optical depth at 550 nm corresponding to Northern Hemisphere middle latitudes during the period 1500–1900. The estimated aerosol optical depths range from 0.05 for background aerosol conditions, to about 0.6 following the Tambora and Krakatau eruptions and cover a time period mostly outside of the instrumentation era.

scholarly journals Coupling sky images with radiative transfer models: a new method to estimate cloud optical depth

2016 ◽  
Vol 9 (8) ◽  
pp. 4151-4165 ◽  
Author(s):  
Felipe A. Mejia ◽  
Ben Kurtz ◽  
Keenan Murray ◽  
Laura M. Hinkelman ◽  
Manajit Sengupta ◽  
...  
Keyword(s):  
Radiative Transfer ◽  
Optical Depth ◽  
Zenith Angle ◽  
Microwave Radiometer ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Cloud Detection ◽  
Cloud Optical Depth ◽  
Angle Scattering ◽  
Atmospheric Radiation Measurement

Abstract. A method for retrieving cloud optical depth (τc) using a UCSD developed ground-based sky imager (USI) is presented. The radiance red–blue ratio (RRBR) method is motivated from the analysis of simulated images of various τc produced by a radiative transfer model (RTM). From these images the basic parameters affecting the radiance and red–blue ratio (RBR) of a pixel are identified as the solar zenith angle (θ0), τc, solar pixel angle/scattering angle (ϑs), and pixel zenith angle/view angle (ϑz). The effects of these parameters are described and the functions for radiance, Iλτc, θ0, ϑs, ϑz, and RBRτc, θ0, ϑs, ϑz are retrieved from the RTM results. RBR, which is commonly used for cloud detection in sky images, provides non-unique solutions for τc, where RBR increases with τc up to about τc = 1 (depending on other parameters) and then decreases. Therefore, the RRBR algorithm uses the measured Iλmeasϑs, ϑz, in addition to RBRmeasϑs, ϑz, to obtain a unique solution for τc. The RRBR method is applied to images of liquid water clouds taken by a USI at the Oklahoma Atmospheric Radiation Measurement (ARM) program site over the course of 220 days and compared against measurements from a microwave radiometer (MWR) and output from the Min et al. (2003) method for overcast skies. τc values ranged from 0 to 80 with values over 80, being capped and registered as 80. A τc RMSE of 2.5 between the Min et al. (2003) method and the USI are observed. The MWR and USI  have an RMSE of 2.2, which is well within the uncertainty of the MWR. The procedure developed here provides a foundation to test and develop other cloud detection algorithms.

scholarly journals Atmospheric effects of volcanic eruptions as seen by famous artists and depicted in their paintings

2007 ◽  
Vol 7 (15) ◽  
pp. 4027-4042 ◽  
Author(s):  
C. S. Zerefos ◽  
V. T. Gerogiannis ◽  
D. Balis ◽  
S. C. Zerefos ◽  
A. Kazantzidis
Keyword(s):  
Time Series ◽  
Radiative Transfer ◽  
Correlation Coefficient ◽  
Aerosol Optical Depth ◽  
Optical Depth ◽  
Volcanic Eruptions ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Atmospheric Effects ◽  
Middle Latitudes

Abstract. Paintings created by famous artists, representing sunsets throughout the period 1500–1900, provide proxy information on the aerosol optical depth following major volcanic eruptions. This is supported by a statistically significant correlation coefficient (0.8) between the measured red-to-green ratios of a few hundred paintings and the dust veil index. A radiative transfer model was used to compile an independent time series of aerosol optical depth at 550 nm corresponding to Northern Hemisphere middle latitudes during the period 1500–1900. The estimated aerosol optical depths range from 0.05 for background aerosol conditions, to about 0.6 following the Tambora and Krakatau eruptions and cover a period practically outside of the instrumentation era.

scholarly journals Interpretation of AIRS Data in Thin Cirrus Atmospheres Based on a Fast Radiative Transfer Model

2007 ◽  
Vol 64 (11) ◽  
pp. 3827-3842 ◽  
Author(s):  
Qing Yue ◽  
K. N. Liou ◽  
S. C. Ou ◽  
B. H. Kahn ◽  
P. Yang ◽  
...  
Keyword(s):  
Radiative Transfer ◽  
Data Assimilation ◽  
Optical Depth ◽  
Crystal Size ◽  
Thermal Infrared ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Cirrus Cloud ◽  
Ice Crystal ◽  
Ice Crystal Size

Abstract A thin cirrus cloud thermal infrared radiative transfer model has been developed for application to cloudy satellite data assimilation. This radiation model was constructed by combining the Optical Path Transmittance (OPTRAN) model, developed for the speedy calculation of transmittances in clear atmospheres, and a thin cirrus cloud parameterization using a number of observed ice crystal size and shape distributions. Numerical simulations show that cirrus cloudy radiances in the 800–1130-cm−1 thermal infrared window are sufficiently sensitive to variations in cirrus optical depth and ice crystal size as well as in ice crystal shape if appropriate habit distribution models are selected a priori for analysis. The parameterization model has been applied to the Atmospheric Infrared Sounder (AIRS) on board the Aqua satellite to interpret clear and thin cirrus spectra observed in the thermal infrared window. Five clear and 29 thin cirrus cases at nighttime over and near the Atmospheric Radiation Measurement program (ARM) tropical western Pacific (TWP) Manus Island and Nauru Island sites have been chosen for this study. A χ2-minimization program was employed to infer the cirrus optical depth and ice crystal size and shape from the observed AIRS spectra. Independent validation shows that the AIRS-inferred cloud parameters are consistent with those determined from collocated ground-based millimeter-wave cloud radar measurements. The coupled thin cirrus radiative transfer parameterization and OPTRAN, if combined with a reliable thin cirrus detection scheme, can be effectively used to enhance the AIRS data volume for data assimilation in numerical weather prediction models.

scholarly journals A new gas absorption optical depth parameterisation for RTTOV v13

2021 ◽  
Author(s):  
James Hocking ◽  
Jérôme Vidot ◽  
Pascal Brunel ◽  
Pascale Roquet ◽  
Bruna Silveira ◽  
...  
Keyword(s):  
Solar Radiation ◽  
Radiative Transfer ◽  
Optical Depth ◽  
Weather Prediction ◽  
Current Approach ◽  
Gas Absorption ◽  
Radiative Transfer Model ◽  
Transfer Model ◽  
Wide Range ◽  
Microwave Radiances

Abstract. This paper describes a new gas optical depth parameterisation implemented in the most recent release, version 13, of the radiative transfer model RTTOV (Radiative Transfer for TOVS). RTTOV is a fast, one-dimensional radiative transfer model for simulating top-of-atmosphere visible, infrared and microwave radiances observed by downward-viewing space-borne passive sensors. A key component of the model is the fast parameterisation of absorption by the various gases in the atmosphere. The existing parameterisation in RTTOV has been extended over many years to allow for additional variable gases in RTTOV simulations and to account for solar radiation and better support geostationary sensors by extending the validity to higher zenith angles. However, there are limitations inherent in the current approach which make it difficult to develop it further, for example by adding new variable gases. We describe a new parameterisation that can be applied across the whole spectrum, allows for a wide range of zenith angles in support of solar radiation and geostationary sensors, and for which it will be easier to add new variable gases in support of user requirements. Comparisons against line-by-line radiative transfer simulations, and against observations in the ECMWF operational system yield promising results, suggesting that the new parameterisation generally compares well with the old one in terms of accuracy. Further validation is planned, including testing in operational numerical weather prediction data assimilation systems.

Effect of Thin Cirrus Clouds on Dust Optical Depth Retrievals From MODIS Observations

2011 ◽  
Vol 49 (6) ◽  
pp. 2819-2827 ◽  
Author(s):  
Qian Feng ◽  
N. Christina Hsu ◽  
Ping Yang ◽  
Si-Chee Tsay
Keyword(s):  
Radiative Transfer ◽  
Optical Depth ◽  
Rayleigh Scattering ◽  
Polarization State ◽  
Cirrus Clouds ◽  
Dust Particles ◽  
Radiative Transfer Model ◽  
Retrieval Algorithm ◽  
Transfer Model ◽  
Lookup Tables

The effect of thin cirrus clouds in retrieving the dust optical depth from MODIS observations is investigated by using a simplified aerosol retrieval algorithm based on the principles of the Deep Blue aerosol property retrieval method. Specifically, the errors of the retrieved dust optical depth due to thin cirrus contamination are quantified through the comparison of two retrievals by assuming dust-only atmospheres and the counterparts with overlapping mineral dust and thin cirrus clouds. To account for the effect of the polarization state of radiation field on radiance simulation, a vector radiative transfer model is used to generate the lookup tables. In the forward radiative transfer simulations involved in generating the lookup tables, the Rayleigh scattering by atmospheric gaseous molecules and the reflection of the surface assumed to be Lambertian are fully taken into account. Additionally, the spheroid model is utilized to account for the nonsphericity of dust particles in computing their optical properties. For simplicity, the single-scattering albedo, scattering phase matrix, and optical depth are specified a priori for thin cirrus clouds assumed to consist of droxtal ice crystals. The present results indicate that the errors in the retrieved dust optical depths due to the contamination of thin cirrus clouds depend on the scattering angle, underlying surface reflectance, and dust optical depth. Under heavy dusty conditions, the absolute errors are comparable to the predescribed optical depths of thin cirrus clouds.

Sign in / Sign up

Export Citation Format

Share Document