Linear Relationships Among the Hand and Clubhead Motion Characteristics in Golf Driving in Skilled Male Golfers

2021 ◽  
Vol 37 (6) ◽  
pp. 619-628
Author(s):  
Young-Hoo Kwon ◽  
Noelle J. Tuttle ◽  
Cheng-Ju Hung ◽  
Nicholas A. Levine ◽  
Seungho Baek
Keyword(s):  
Motion Capture ◽  
Plane Motion ◽  
Motion Pattern ◽  
Hand Motion ◽  
Linear Relationships ◽  
Optical Motion ◽  
Key Variables ◽  
Motion Characteristics ◽  
Optical Motion Capture ◽  
Motion Plane

The purpose of this study was to investigate the linear relationships among the hand/clubhead motion characteristics in golf driving in skilled male golfers (n = 66; handicap ≤ 3). The hand motion plane (HMP) and functional swing plane (FSP) angles, the HMP–FSP angle gaps, the planarity characteristics of the off-plane motion of the clubhead, and the attack angles were computed from the drives captured by an optical motion capture system. The HMP angles were identified as the key variables, as the HMP and FSP angles were intercorrelated, but the plane angle gaps, the planarity bias, and the attack angles showed correlations to the HMP angles primarily. Three main swing pattern clusters were identified. The parallel HMP–FSP alignment pattern with a small direction gap was associated with neutral planarity and planar swing pattern. The inward alignment pattern with a large inward direction gap was characterized by flat planes, follow-through-centric planarity, spiral swing pattern, and inward/downward impact. The outward alignment pattern with a large outward direction gap was associated with steep planes, downswing-centric planarity, reverse spiral swing, and outward/upward impact. The findings suggest that practical drills targeting the hand motion pattern can be effective in holistically reprogramming the swing pattern.

scholarly journals Gap Reconstruction in Optical Motion Capture Sequences Using Neural Networks

Sensors ◽  
2021 ◽  
Vol 21 (18) ◽  
pp. 6115
Author(s):  
Przemysław Skurowski ◽  
Magdalena Pawlyta
Keyword(s):  
Neural Networks ◽  
Motion Capture ◽  
Matrix Completion ◽  
Input Sequence ◽  
Feedforward Neural Networks ◽  
Network Architectures ◽  
Motion Data ◽  
Optical Motion ◽  
Body Kinematic ◽  
Optical Motion Capture

Optical motion capture is a mature contemporary technique for the acquisition of motion data; alas, it is non-error-free. Due to technical limitations and occlusions of markers, gaps might occur in such recordings. The article reviews various neural network architectures applied to the gap-filling problem in motion capture sequences within the FBM framework providing a representation of body kinematic structure. The results are compared with interpolation and matrix completion methods. We found out that, for longer sequences, simple linear feedforward neural networks can outperform the other, sophisticated architectures, but these outcomes might be affected by the small amount of data availabe for training. We were also able to identify that the acceleration and monotonicity of input sequence are the parameters that have a notable impact on the obtained results.

scholarly journals Use of computer innovative technologies in improving the dartsmen training

2020 ◽  
Vol 26 ◽  
pp. 00061
Author(s):  
Elina Makarova ◽  
Vladislav Dubatovkin ◽  
Nataliya Berezinskaya ◽  
Lyudmila Barkhatova ◽  
Elena Oleynik
Keyword(s):  
Motion Capture ◽  
Body Parts ◽  
Visual Material ◽  
Video Cameras ◽  
Dart Throwing ◽  
Optical Motion ◽  
Optical Motion Capture ◽  
Effective Use ◽  
Near Future ◽  
Motion Capture Systems

The research is focused on studying the possibility of effective use of the dart grip system, the work of the athlete’s hand, to prepare the dartsman for competitions using the MOSAR complex. The experiment uses optical motion capture systems, a set of video cameras, led parameter sensors, and devices that allow to record the movement of body parts and a dart. This method of training and controlling dart throwing can serve as educational and visual material for training future athletes. The use of such motion capture systems in the near future may become one of the main aspects of training, both beginners and professionals, in many sports.

Human Motion Capture Driven by Orientation Measurements

1999 ◽  
Vol 8 (2) ◽  
pp. 187-203 ◽  
Author(s):  
Tom Molet ◽  
Ronan Boulic ◽  
Daniel Thalmann
Keyword(s):  
Motion Capture ◽  
Human Motion ◽  
High Rate ◽  
Position Measurement ◽  
Human Motion Capture ◽  
Fast Tracking ◽  
Optical Motion ◽  
Optical Motion Capture ◽  
Tracking Object ◽  
Capture Techniques

Motion-capture techniques are rarely based on orientation measurements for two main reasons: (1) optical motion-capture systems are designed for tracking object position rather than their orientation (which can be deduced from several trackers), (2) known animation techniques, like inverse kinematics or geometric algorithms, require position targets constantly, but orientation inputs only occasionally. We propose a complete human motion-capture technique based essentially on orientation measurements. The position measurement is used only for recovering the global position of the performer. This method allows fast tracking of human gestures for interactive applications as well as high rate recording. Several motion-capture optimizations, including the multijoint technique, improve the posture realism. This work is well suited for magnetic-based systems that rely more on orientation registration (in our environment) than position measurements that necessitate difficult system calibration.

scholarly journals Measuring Spinal Mobility Using an Inertial Measurement Unit System: A Validation Study in Axial Spondyloarthritis

Diagnostics ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 426
Author(s):  
I. Concepción Aranda-Valera ◽  
Antonio Cuesta-Vargas ◽  
Juan L. Garrido-Castro ◽  
Philip V. Gardiner ◽  
Clementina López-Medina ◽  
...  
Keyword(s):  
Outcome Measures ◽  
Motion Capture ◽  
Axial Spondyloarthritis ◽  
Human Motion ◽  
Spinal Mobility ◽  
Measurement Unit ◽  
Human Motion Analysis ◽  
Inertial Measurement ◽  
Optical Motion ◽  
Optical Motion Capture

Portable inertial measurement units (IMUs) are beginning to be used in human motion analysis. These devices can be useful for the evaluation of spinal mobility in individuals with axial spondyloarthritis (axSpA). The objectives of this study were to assess (a) concurrent criterion validity in individuals with axSpA by comparing spinal mobility measured by an IMU sensor-based system vs. optical motion capture as the reference standard; (b) discriminant validity comparing mobility with healthy volunteers; (c) construct validity by comparing mobility results with relevant outcome measures. A total of 70 participants with axSpA and 20 healthy controls were included. Individuals with axSpA completed function and activity questionnaires, and their mobility was measured using conventional metrology for axSpA, an optical motion capture system, and an IMU sensor-based system. The UCOASMI, a metrology index based on measures obtained by motion capture, and the IUCOASMI, the same index using IMU measures, were also calculated. Descriptive and inferential analyses were conducted to show the relationships between outcome measures. There was excellent agreement (ICC > 0.90) between both systems and a significant correlation between the IUCOASMI and conventional metrology (r = 0.91), activity (r = 0.40), function (r = 0.62), quality of life (r = 0.55) and structural change (r = 0.76). This study demonstrates the validity of an IMU system to evaluate spinal mobility in axSpA. These systems are more feasible than optical motion capture systems, and they could be useful in clinical practice.

scholarly journals Comparative Analysis of Inertial Sensor to Optical Motion Capture System Performance in Push-Pull Exertion Postures

2016 ◽  
Vol 60 (1) ◽  
pp. 970-974 ◽  
Author(s):  
Sol Lim ◽  
Andrea Case ◽  
Clive D’Souza
Keyword(s):  
Motion Capture ◽  
Inertial Sensors ◽  
Inertial Sensor ◽  
Interactive Effects ◽  
Flexion Angle ◽  
Task Demand ◽  
Optical Motion ◽  
Physical Task ◽  
Target Force ◽  
Optical Motion Capture

This study examined interactions between inertial sensor (IS) performance and physical task demand on posture kinematics in a two-handed force exertion task. Fifteen male individuals participated in a laboratory experiment that involved exerting a two-handed isometric horizontal force on an instrumented height-adjustable handle. Physical task demand was operationalized by manipulating vertical handle height, target force magnitude, and force direction. These factors were hypothesized to influence average estimates of torso flexion angle measured using inertial sensors and an optical motion capture (MC) system, as well as the root mean squared errors (RMSE) between instrumentation computed over a 3s interval of the force exertion task. Results indicate that lower handle heights and higher target force levels were associated with increased torso and pelvic flexion in both, push and pull exertions. Torso flexion angle estimates obtained from IS and MC did not differ significantly. However, RMSE increased with target force intensity suggesting potential interactive effects between measurement error and physical task demand.

Sign in / Sign up

Export Citation Format

Share Document