Increase in the Stratospheric Background Sulfuric Acid Aerosol Mass in the Past 10 Years

Science ◽  
1990 ◽  
Vol 248 (4958) ◽  
pp. 996-1000 ◽  
Author(s):  
D. J. Hofmann
Keyword(s):  
The Past ◽  
Author(s):  
T. J. Magee ◽  
J. Peng ◽  
J. Bean

Cadmium telluride has become increasingly important in a number of technological applications, particularly in the area of laser-optical components and solid state devices, Microstructural characterizations of the material have in the past been somewhat limited because of the lack of suitable sample preparation and thinning techniques. Utilizing a modified jet thinning apparatus and a potassium dichromate-sulfuric acid thinning solution, a procedure has now been developed for obtaining thin contamination-free samples for TEM examination.


2019 ◽  
Vol 19 (5) ◽  
pp. 3137-3160 ◽  
Author(s):  
Anna L. Hodshire ◽  
Pedro Campuzano-Jost ◽  
John K. Kodros ◽  
Betty Croft ◽  
Benjamin A. Nault ◽  
...  

Abstract. Atmospheric marine aerosol particles impact Earth's albedo and climate. These particles can be primary or secondary and come from a variety of sources, including sea salt, dissolved organic matter, volatile organic compounds, and sulfur-containing compounds. Dimethylsulfide (DMS) marine emissions contribute greatly to the global biogenic sulfur budget, and its oxidation products can contribute to aerosol mass, specifically as sulfuric acid and methanesulfonic acid (MSA). Further, sulfuric acid is a known nucleating compound, and MSA may be able to participate in nucleation when bases are available. As DMS emissions, and thus MSA and sulfuric acid from DMS oxidation, may have changed since pre-industrial times and may change in a warming climate, it is important to characterize and constrain the climate impacts of both species. Currently, global models that simulate aerosol size distributions include contributions of sulfate and sulfuric acid from DMS oxidation, but to our knowledge, global models typically neglect the impact of MSA on size distributions. In this study, we use the GEOS-Chem-TOMAS (GC-TOMAS) global aerosol microphysics model to determine the impact on aerosol size distributions and subsequent aerosol radiative effects from including MSA in the size-resolved portion of the model. The effective equilibrium vapor pressure of MSA is currently uncertain, and we use the Extended Aerosol Inorganics Model (E-AIM) to build a parameterization for GC-TOMAS of MSA's effective volatility as a function of temperature, relative humidity, and available gas-phase bases, allowing MSA to condense as an ideally nonvolatile or semivolatile species or too volatile to condense. We also present two limiting cases for MSA's volatility, assuming that MSA is always ideally nonvolatile (irreversible condensation) or that MSA is always ideally semivolatile (quasi-equilibrium condensation but still irreversible condensation). We further present simulations in which MSA participates in binary and ternary nucleation with the same efficacy as sulfuric acid whenever MSA is treated as ideally nonvolatile. When using the volatility parameterization described above (both with and without nucleation), including MSA in the model changes the global annual averages at 900 hPa of submicron aerosol mass by 1.2 %, N3 (number concentration of particles greater than 3 nm in diameter) by −3.9 % (non-nucleating) or 112.5 % (nucleating), N80 by 0.8 % (non-nucleating) or 2.1 % (nucleating), the cloud-albedo aerosol indirect effect (AIE) by −8.6 mW m−2 (non-nucleating) or −26 mW m−2 (nucleating), and the direct radiative effect (DRE) by −15 mW m−2 (non-nucleating) or −14 mW m−2 (nucleating). The sulfate and sulfuric acid from DMS oxidation produces 4–6 times more submicron mass than MSA does, leading to an ∼10 times stronger cooling effect in the DRE. But the changes in N80 are comparable between the contributions from MSA and from DMS-derived sulfate/sulfuric acid, leading to comparable changes in the cloud-albedo AIE. Model–measurement comparisons with the Heintzenberg et al. (2000) dataset over the Southern Ocean indicate that the default model has a missing source or sources of ultrafine particles: the cases in which MSA participates in nucleation (thus increasing ultrafine number) most closely match the Heintzenberg distributions, but we cannot conclude nucleation from MSA is the correct reason for improvement. Model–measurement comparisons with particle-phase MSA observed with a customized Aerodyne high-resolution time-of-flight aerosol mass spectrometer (AMS) from the ATom campaign show that cases with the MSA volatility parameterizations (both with and without nucleation) tend to fit the measurements the best (as this is the first use of MSA measurements from ATom, we provide a detailed description of these measurements and their calibration). However, no one model sensitivity case shows the best model–measurement agreement for both Heintzenberg and the ATom campaigns. As there are uncertainties in both MSA's behavior (nucleation and condensation) and the DMS emissions inventory, further studies on both fronts are needed to better constrain MSA's past, current, and future impacts upon the global aerosol size distribution and radiative forcing.


2007 ◽  
Vol 43 (1) ◽  
pp. 1-19 ◽  
Author(s):  
F. Habashi

Copper technology changed from the vertical to the horizontal furnace and from the roast reaction to converting towards the end of the last century. However, the horizontal furnace proved to be an inefficient and polluting reactor. As a result many attempts were made to replace it. In the past 50 years new successful melting processes were introduced on an industrial scale that were more energy efficient and less polluting. In addition, smelting and converting were conducted in a single reactor in which the concentrate was fed and the raw copper was produced. The standing problem in many countries, however, is marketing 3 tonnes of sulfuric acid per tonne of copper produced as well as emitting large amounts of excess SO2 in the atmosphere. Pressure hydrometallurgy offers the possibility of liberating the copper industry from SO2 problem. Heap leaching technology has become a gigantic operation. Combined with solvent extraction and electrowinning it contributes today to about 20% of copper production and is expected to grow. Pressure leaching offers the possibility of liberating the copper industry from SO2 problem. The technology is over hundred years old. It is applied for leaching a variety of ores and concentrates. Hydrothermal oxidation of sulfide concentrates has the enormous advantage of producing elemental sulfur, hence solving the SO2 and sulfuric acid problems found in smelters. Precipitation of metals such as nickel and cobalt under hydrothermal conditions has been used for over 50 years. It has the advantage of a compact plant but the disadvantage of producing ammonium sulfate as a co-product. In case of copper, however, precipitation takes place without the need of neutralizing the acid, which is a great advantage and could be an excellent substitute for electrowinning which is energy intensive and occupies extensive space. Recent advances in the engineering aspects of pressure equipment design open the door widely for increased application. .


2014 ◽  
Vol 219 ◽  
pp. 93-96
Author(s):  
Vincent Sih ◽  
Berthold Reimer ◽  
Anthony S. Ratkovich ◽  
Jeffrey M. Lauerhaas ◽  
Jeffery W. Butterbaugh

Selective nitride etching in semiconductor manufacturing is currently performed in wet benches using hot orthophosphoric acid at 160-180C. This process requires silica seasoning to achieve the desired selectivity to silicon oxide. Silica seasoning in wet benches is achieved by etching blanket silicon nitride wafers prior to running productions runs. While, this method of selective silicon nitride etching has been successful in the past, particle requirements at advanced nodes [1] are driving the need for a new solution. Single wafer wet processing is proposed as a way to meet these challenging new particle specifications.


2018 ◽  
Author(s):  
Anna L. Hodshire ◽  
Pedro Campuzano-Jost ◽  
John K. Kodros ◽  
Betty Croft ◽  
Benjamin A. Nault ◽  
...  

Abstract. Atmospheric marine aerosol particles impact Earth's albedo and climate. These particles can be primary or secondary and come from a variety of sources, including sea salt, dissolved organic matter, volatile organic compounds, and sulfur-containing compounds. Dimethylsulfide (DMS) marine emissions contribute greatly to the global biogenic sulfur budget, and its oxidation products can contribute to aerosol mass, specifically as sulfuric acid and methanesulfonic acid (MSA). Further, sulfuric acid is a known nucleating compound, and MSA may be able to participate in nucleation when bases are available. As DMS emissions, and thus MSA and sulfuric acid from DMS oxidation, may have changed since pre-industrial times and may change in a warming climate, it is important to characterize and constrain the climate impacts of both species. Currently, global models that simulate aerosol size distributions include contributions of sulfate and sulfuric acid from DMS oxidation, but to our knowledge, global models typically neglect the impact of MSA on size distributions. In this study, we use the GEOS-Chem-TOMAS (GC-TOMAS) global aerosol microphysics model to determine the impact on aerosol size distributions and subsequent aerosol radiative effects from including MSA in the size-resolved portion of the model. The effective equilibrium vapor pressure of MSA is currently uncertain, and we use the Extended Aerosol Inorganics Model (E-AIM) to build a parameterization for GC-TOMAS of MSA's effective volatility as a function of temperature, relative humidity, and available gas-phase bases, allowing MSA to condense as an ideally nonvolatile or semivolatile species or too volatile to condense. We also present two limiting cases for MSA's volatility, assuming that MSA is always ideally nonvolatile (irreversible condensation) or that MSA is always ideally semivolatile (quasi-equilibrium condensation but still irreversible condensation). We further present simulations in which MSA participates in binary and ternary nucleation with the same efficacy as sulfuric acid whenever MSA is treated as ideally nonvolatile. When using the volatility parameterization described above (both with and without nucleation), including MSA in the model changes the global annual averages at 900 hPa of submicron aerosol mass by 1.2 %, N3 (number concentration of particles greater than 3 nm in diameter) by −3.9 % (non-nucleating) or 112.5 % (nucleating), N80 by 0.8 % (non-nucleating) or 2.1 % (nucleating), the aerosol indirect effect (AIE) by −8.6 mW m−2 (non-nucleating) or −26 mW m−2 (nucleating), and the direct radiative effect (DRE) by −15 mW m−2 (non-nucleating) or −14 mW m−2 (nucleating). The sulfate and sulfuric acid from DMS oxidation produces 4–6 times more submicron mass than MSA does, leading to ~ 10 times a stronger cooling effect in the DRE. But the changes in N80 are comparable between the contributions from MSA and from DMS-derived sulfate/sulfuric acid, leading to comparable changes in the AIE. Model-measurement comparisons with the Heintzenberg et al. (2000) dataset over the Southern Ocean indicate that the default model has a missing source or sources of ultrafine particles: the cases in which MSA participates in nucleation (thus increasing ultrafine number) most closely match the Heintzenberg distributions, but we cannot conclude nucleation from MSA is the correct reason for improvement. Model-measurement comparisons with particle-phase MSA observed with a customized Aerodyne high-resolution time-of-flight aerosol mass spectrometer (AMS) from the ATom campaign show that cases with the MSA volatility parameterizations (both with and without nucleation) tend to fit the measurements the best (as this is the first use of MSA measurements from ATom, we provide a detailed description of these measurements and their calibration). However, no one model sensitivity case shows the best model-measurement agreement for both Heintzenberg and the ATom campaigns. As there are uncertainties in both MSA's behavior (nucleation and condensation) and the DMS emissions inventory, further studies on both fronts are needed to better constrain MSA's past, current and future impacts upon the global aerosol size distribution and radiative forcing.


2012 ◽  
Vol 12 (1) ◽  
pp. 225-235 ◽  
Author(s):  
I. K. Ortega ◽  
O. Kupiainen ◽  
T. Kurtén ◽  
T. Olenius ◽  
O. Wilkman ◽  
...  

Abstract. Atmospheric new particle formation is an important source of atmospheric aerosols. Large efforts have been made during the past few years to identify which molecules are behind this phenomenon, but the actual birth mechanism of the particles is not yet well known. Quantum chemical calculations have proven to be a powerful tool to gain new insights into the very first steps of particle formation. In the present study we use formation free energies calculated by quantum chemical methods to estimate the evaporation rates of species from sulfuric acid clusters containing ammonia or dimethylamine. We have found that dimethylamine forms much more stable clusters with sulphuric acid than ammonia does. On the other hand, the existence of a very deep local minimum for clusters with two sulfuric acid molecules and two dimethylamine molecules hinders their growth to larger clusters. These results indicate that other compounds may be needed to make clusters grow to larger sizes (containing more than three sulfuric acid molecules).


Author(s):  
Roald Hoffmann

The Vatican holds a fresco by Raphael entitled The School of Athens. Plato and Aristotle stride toward us. Plato’s hand points to the heavens, Aristotle’s outward, along the plane of the earth. The message is consistent with their philosophies—whereas Plato had a geometric prototheory of the chemistry of matter, Aristotle described in reliable detail how Tyrian purple (now known to be mainly indigo and dibromoindigo) was extracted from rock murex snails. Plato searched for the ideal; Aristotle looked to nature. Modern chemistry faces the quandary that Raphael’s fresco epitomizes. Should it follow the hand sign of Aristotle or that of Plato? Is nature as fertile a source for new materials as some assert it to be? Can we, for example, hope to make better composites by mimicking the microstructure of a feather or of a strand of spider’s silk? Are chemists better advised to seek their inspiration in ideal mathematical forms, in icosahedra and in soccer balls? Or should we hazard chance? To some, the division between natural and unnatural is arbitrary; they would argue that man and woman are patently natural, and so are all their transformations. Such a view is understandable and has a venerable history, but it does away with a distinction that troubles ordinary and thoughtful people. So I will distinguish between the actions, mostly intended, of human beings and those of animals, plants and the inanimate world around us. A sunset is natural; a sulfuric acid factory is not. The 1.3 billion head of cattle in this world pose an interesting problem for any definition. Most of them are both natural and unnatural—the product of breeding controlled by humans. The molecules that exist naturally on the earth emerged over billions of years as rocks cooled, oceans formed, gases escaped, and life evolved. The number of natural molecules is immense; perhaps a few hundred thousand have been separated, purified, and identified. The vast majority of the compounds that fit into the unnatural category were created during the past three centuries. Chemists have added some 70 million well-characterized molecules to nature’s bounty.


2008 ◽  
Vol 8 (2) ◽  
pp. 4831-4876 ◽  
Author(s):  
S. R. Zorn ◽  
F. Drewnick ◽  
M. Schott ◽  
T. Hoffmann ◽  
S. Borrmann

Abstract. Measurements of the submicron fraction of the atmospheric aerosol in the marine boundary layer were performed from January to March 2007 (Southern Hemisphere summer) onboard the French research vessel Marion Dufresne in the Southern Atlantic and Indian Ocean (20° S–60° S, 70° W–60° E). For chemical composition measurements an Aerodyne High-Resolution-Time-of-Flight AMS was used to measure mass concentrations and species-resolved size distributions of non-refractory aerosol components in the submicron range. Within the "standard" AMS compounds (ammonium, chloride, nitrate, sulfate, organics) "sulfate" is the dominating species in the marine boundary layer reaching concentrations between 50 ng m−3 and 3 μg m−3. Furthermore, what is seen as "sulfate" by the AMS seems to be mostly sulfuric acid. Another sulfur containing species that can ubiquitously be found in marine environments is methanesulfonic acid (MSA). Since MSA has not been directly measured before with an AMS, and is not part of the standard AMS analysis, laboratory experiments needed to be performed in order to be able to identify it within the AMS raw data and to extract mass concentrations for MSA from the field measurements. To identify characteristic air masses and their source regions backwards trajectories were used and averaged concentrations for AMS standard compounds were calculated for each air mass type. Sulfate mass size distributions were measured for these periods showing a distinct difference between oceanic air masses and those from African outflow. While the peak size in the mass distribution was roughly 250 nm in marine air masses it was shifted to 470 nm in African outflow air. Correlations between the mass concentrations of sulfate, organics and MSA were calculated which show a narrow correlation for MSA with sulfate/sulfuric acid coming from the ocean but not with continental sulfate.


2011 ◽  
Vol 11 (10) ◽  
pp. 27327-27357 ◽  
Author(s):  
I. K. Ortega ◽  
O. Kupiainen ◽  
T. Kurtén ◽  
T. Olenius ◽  
O. Wilkman ◽  
...  

Abstract. Atmospheric new particle formation is an important source of atmospheric aerosols. Large efforts have been made during the past few years to identify which molecules are behind this phenomenon, but the actual birth mechanism of the particles is not yet well known. Quantum chemical calculations have proven to be a powerful tool to gain new insights into the very first steps of particle formation. In the present study we use formation free energies calculated by quantum chemical methods to estimate the evaporation rates of species from sulfuric acid clusters containing ammonia or dimethylamine. We have found that dimethylamine forms much more stable clusters with sulphuric acid than ammonia does. On the other hand, the existence of a very deep local minimum for clusters with two sulfuric acid molecules and two dimethylamine molecules hinders their growth to larger clusters. These results indicate that other compounds may be needed to make clusters grow to larger sizes (containing more than three sulfuric acid molecules).


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Gábor Holló ◽  
Nobuhiko J. Suematsu ◽  
Elliott Ginder ◽  
István Lagzi

AbstractField-assisted self-assembly, motion, and manipulation of droplets have gained much attention in the past decades. We exhibit an electric field manipulation of the motion of a liquid metal (mercury) droplet submerged in a conductive liquid medium (a solution of sulfuric acid). A mercury droplet moves toward the cathode and its path selection is always given by the steepest descent of the local electric field potential. Utilizing this unique behavior, we present several examples of droplet motions, including maze solving, electro-levitation, and motion on a diverted path between parallel electrodes by controlling the conductivity of the medium. We also present an experimental demonstration of Fermat's principle in a non-optical system, namely a mercury droplet moving along a refracted path between electrodes in a domain having two different conductivities.


Sign in / Sign up

Export Citation Format

Share Document