Dependence of crustal accretion and ridge-axis topography on spreading rate, mantle temperature, and hydrothermal cooling

Author(s):  
Yongshun John Chen
Nature ◽  
1993 ◽  
Vol 364 (6439) ◽  
pp. 706-708 ◽  
Author(s):  
Jason Phipps Morgan ◽  
Y. John Chen

2013 ◽  
Vol 6 (5) ◽  
pp. 1659-1672
Author(s):  
P. Machetel ◽  
C. J. Garrido

Abstract. We designed a thermo-mechanical numerical model for fast-spreading mid-ocean ridge with variable viscosity, hydrothermal cooling, latent heat release, sheeted dyke layer, and variable melt intrusion possibilities. The model allows for modulating several accretion possibilities such as the "gabbro glacier" (G), the "sheeted sills" (S) or the "mixed shallow and MTZ lenses" (M). These three crustal accretion modes have been explored assuming viscosity contrasts of 2 to 3 orders of magnitude between strong and weak phases and various hydrothermal cooling conditions depending on the cracking temperatures value. Mass conservation (stream-function), momentum (vorticity) and temperature equations are solved in 2-D cartesian geometry using 2-D, alternate direction, implicit and semi-implicit finite-difference scheme. In a first step, an Eulerian approach is used solving iteratively the motion and temperature equations until reaching steady states. With this procedure, the temperature patterns and motions that are obtained for the various crustal intrusion modes and hydrothermal cooling hypotheses display significant differences near the mid-ocean ridge axis. In a second step, a Lagrangian approach is used, recording the thermal histories and cooling rates of tracers travelling from the ridge axis to their final emplacements in the crust far from the mid-ocean ridge axis. The results show that the tracer's thermal histories are depending on the temperature patterns and the crustal accretion modes near the mid-ocean ridge axis. The instantaneous cooling rates obtained from these thermal histories betray these discrepancies and might therefore be used to characterize the crustal accretion mode at the ridge axis. These deciphering effects are even more pronounced if we consider the average cooling rates occurring over a prescribed temperature range. Two situations were tested at 1275–1125 °C and 1050–850 °C. The first temperature range covers mainly the crystallization range that is characteristic of the high temperature areas in the model (i.e. the near-mid-oceanic-ridge axis). The second temperature range corresponds to areas in the model where the motion is mainly laminar and the vertical temperature profiles are closer to conductive. Thus, this situation results in less discriminating efficiency among the crustal accretion modes since the thermal and dynamic properties that are described are common to all the crustal accretion modes far from the ridge axis. The results show that numerical modeling of thermo-mechanical properties of the lower crusts may bring useful information to characterize the ridge accretion structure, hydrothermal cooling and thermal state at the fast-spreading ridges and may open discussions with petrological cooling rate results.


2020 ◽  
pp. jgs2020-208
Author(s):  
Tong Liu ◽  
Chuan-Zhou Liu ◽  
Fu-Yuan Wu ◽  
Henry J.B. Dick ◽  
Wen-Bin Ji ◽  
...  

The crust and mantle in both ophiolites (fossil ocean lithosphere) and in modern oceans are enormously diverse. Along-axis morphology and lower crustal accretion at ultraslow-spreading ocean ridges are fundamentally different from those at faster-spreading ridges, and are key to understanding how crustal accretion varies with spreading rate and magma supply. Ultraslow-spreading ridges provide analogs for ophiolites, to identify those that may have formed under similar conditions. Parallel studies of modern ocean lithosphere and ophiolites therefore can uniquely inform the origin and genesis of both. Here we report the results of structural and petrological studies on the Xigaze ophiolite in the Tibetan Plateau, and compare it to the morphology and deep drilling results at the ultraslow-spreading Southwest Indian Ridge. The Xigaze ophiolite has a complete but laterally discontinuous crust, with discrete diabase dikes/sills cutting both mantle and lower crust. The gabbro units are thin (∼350 m) and show upward cyclic chemical variations, supporting for an episodic and intermittent magma supply. These features are comparable to the highly focused magmatism and low magma budget at modern ultraslow-spreading ridges. Thus we suggest that the Xigaze ophiolite represents an on-land analog of ultraslow-spreading ocean lithosphere.


2021 ◽  
Vol 13 (5) ◽  
pp. 997
Author(s):  
Hakkyum Choi ◽  
Seung-Sep Kim ◽  
Sung-Hyun Park ◽  
Hyoung Jun Kim

Underwater volcanoes and their linear distribution on the flanks of mid-ocean ridges are common submarine topographic structures at intermediate- and fast-spreading systems, where sufficient melt supplies are often available. Such magma sources beneath the seafloor located within a few kilometers of the corresponding ridge-axis tend to concentrate toward the axis during the upwelling process and contribute to seafloor formation. As a result, seamounts on the flanks of the ridge axis are formed at a distance from the spreading axis and distributed asymmetrically about the axis. In this study, we examined three linearly aligned seamount chains on the flanks of the KR1 ridge, which is the easternmost and longest Australian-Antarctic Ridge (AAR) segment. The AAR is an intermediate-spreading rate system located between the Southeast Indian Ridge and Macquarie Triple Junction of the Australian-Antarctic-Pacific plates. By inspecting the high-resolution shipboard multi-beam bathymetric data newly acquired in the study area, we detected 20 individual seamounts. The volcanic lineament runs parallel to the spreading direction of the KR1 segment. The geomorphologic parameters of height, basal area, volume, and summit types of the identified seamounts were individually measured. We also investigated the spatial distribution of the seamounts along the KR1 segment, which exhibits large variations in axial morphology with depth along the ridge axis. Based on the geomorphology and spatial distribution, all the KR1 seamounts can be divided into two groups: the subset seamounts of volcanic chains distributed along the KR1 segment characterized by high elevation and large volume, and the small seamounts distributed mostly on the western KR1. The differences in the volumetric magnitude of volcanic eruptions on the seafloor and the distance from the given axis between these two groups indicate the presence of magma sources with different origins.


1989 ◽  
Vol 94 (B12) ◽  
pp. 17383 ◽  
Author(s):  
Christopher Small ◽  
David T. Sandwell

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
John M. O’Connor ◽  
Wilfried Jokat ◽  
Peter J. Michael ◽  
Mechita C. Schmidt-Aursch ◽  
Daniel P. Miggins ◽  
...  

AbstractDespite progress in understanding seafloor accretion at ultraslow spreading ridges, the ultimate driving force is still unknown. Here we use 40Ar/39Ar isotopic dating of mid-ocean ridge basalts recovered at variable distances from the axis of the Gakkel Ridge to provide new constraints on the spatial and temporal distribution of volcanic eruptions at various sections of an ultraslow spreading ridge. Our age data show that magmatic-dominated sections of the Gakkel Ridge spread at a steady rate of ~11.1 ± 0.9 mm/yr whereas amagmatic sections have a more widely distributed melt supply yielding ambiguous spreading rate information. These variations in spreading rate and crustal accretion correlate with locations of hotter thermochemical anomalies in the asthenosphere beneath the ridge. We conclude therefore that seafloor generation in ultra-slow spreading centres broadly reflects the distribution of thermochemical anomalies in the upper mantle.


2020 ◽  
Author(s):  
Nicolas Chamot-Rooke ◽  
Alexandre Janin ◽  
Mathieu Rodriguez ◽  
Matthias Delescluse ◽  
Jérôme Dyment ◽  
...  

<p>A sizeable portion of oceanic lithosphere has been produced at the Carlsberg Ridge, one of the three major ridge branches that shaped the Indian Ocean. Accretion started in the Paleocene with the ultra-fast widening of the Arabian Sea to the North and the Eastern Somali Basin to the South (full spreading rate of ~130 mm/yr between 61 Ma and 49 Ma), both basins opening in the wake of the rapid migration of India towards Eurasia. Spreading rate abruptly dropped to ultra-slow after 47 Ma and a long period of accretion stagnation prevailed (full rate <12 mm/yr) until the establishment of the slow present-day regime at ~20 Ma (mean 24 mm/yr rate since Chron 6 at the western end of the Carlsberg Ridge). Mode and rate of production of ocean floor at the Carlsberg Ridge seem to have interacted with a number of regional tectonic events since the beginning of the Himalayan orogeny, including the early Indian continent collision, the westward propagation of the Sheba Ridge into the Africa/Arabia continent and the coeval initiation of the Owen transform and opening of the Gulf of Aden. Here we report the results of the recent CARLMAG survey (Spring 2019) conducted at the westernmost edge of the Carlsberg Ridge close to its intersection with the active Owen transform fault. The cruise was conducted aboard BHO Beautemps-Beaupré operated by the French Naval Hydrographic and Oceanographic Service. We explored the post-50 Ma ocean floor along a set of long profiles crossing both sides of the ridge using multibeam bathymetry, bottom reflectivity, mud penetrator, magnetic and gravimetric measurements. For the first time, semi-complete multibeam coverage allows detailed mapping of the seafloor until it gets buried below the sediments of the Indus fan, at least over the northern limb. The southern limb, devoid of sediments, shows clear rotation of the main fault trends towards older ages, which we attribute to changes in India-Somalia kinematics. The region close to the ridge axis and close to the Owen transform is rich in oceanic core complexes, some of them known from patchy previous acquisitions, and others discovered in the course of our survey. Their highly corrugated surfaces show a wide variety of shapes at various distances from the ridge axis that may be seen as snapshots through time, bearing important information regarding their formation and progressive erosion as they move away. A clear pattern of Miocene oceanic magnetic lineations is recognized, as well as a few older anomalies at the extreme Northern and Southern limits of the survey. This dataset allows us to build a new structural and kinematic scenario for the evolution of this segment of the Carlsberg Ridge and frame it into a more regional geodynamic framework.</p>


Sign in / Sign up

Export Citation Format

Share Document