Field and petrographic reconnaissance of Franciscan complex rocks of Mount Diablo, California: Imbricated ocean floor stratigraphy with a roof exhumation fault system

2021 ◽  
Author(s):  
John Wakabayashi
Keyword(s):  
Fault System ◽  
Normal Faults ◽  
Coast Range ◽  
Franciscan Complex ◽  
The North ◽  
Tectonic Window ◽  
Coast Range Ophiolite ◽  
Great Valley Group ◽  
Clastic Sedimentary ◽  
Great Valley

ABSTRACT Franciscan subduction complex rocks of Mount Diablo form an 8.5 by 4.5 km tectonic window, elongated E-W and fault-bounded to the north and south by rocks of the Coast Range ophiolite and Great Valley Group, respectively, which lack the burial metamorphism and deformation displayed by the Franciscan complex. Most of the Franciscan complex consists of a stack of lawsonite-albite–facies pillow basalt overlain successively by chert and clastic sedimentary rocks, repeated by faults at hundreds of meters to <1 m spacing. Widely distributed mélange zones from 0.5 to 300 m thick containing high-grade (including amphibolite and eclogite) assemblages and other exotic blocks, up to 120 m size, form a small fraction of exposures. Nearly all clastic rocks have a foliation, parallel to faults that repeat the various lithologies, whereas chert and basalt lack foliation. Lawsonite grew parallel to foliation and as later grains across foliation. The Franciscan-bounding faults, collectively called the Coast Range fault, strike ENE to WNW and dip northward at low to moderate average angles and collectively form a south-vergent overturned anticline. Splays of the Coast Range fault also cut into the Franciscan strata and Coast Range ophiolite and locally form the Coast Range ophiolite–Great Valley Group boundary. Dip discordance between the Coast Range fault and overlying Great Valley Group strata indicates that the northern and southern Coast Range fault segments were normal faults with opposite dip directions, forming a structural dome. These relationships suggest accretion and fault stacking of the Franciscan complex, followed by exhumation along the Coast Range fault and then folding of the Coast Range fault.

scholarly journals Structural cross sections through the Corinth-Patras detachment fault-system in Northern Peloponnesus (Aegean Arc, Greece)

2001 ◽  
Vol 34 (1) ◽  
pp. 235 ◽  
Author(s):  
N. FLOTTÉ ◽  
D. SOREL
Keyword(s):  
Cross Sections ◽  
Detachment Fault ◽  
Fault System ◽  
Normal Faults ◽  
Field Observations ◽  
Structural Mapping ◽  
The North ◽  
Gulf Of Corinth ◽  
Aegean Arc

Structural mapping in northern Peloponnesus reveals the emergence of an E-W striking, more than 70km long, low angle detachment fault dipping to the north beneath the Gulf of Corinth. This paper describes four north-south structural cross-sections in northern Peloponnesus. Structural and sedimentological field observations show that in the studied area the normal faults of northern Peloponnesus branch at depth on this major low angle north-dipping brittle detachment. The southern part of the detachment and the related normal faults are now inactive. To the north, the active Helike and Aigion normal faults are connected at depth with the seismically active northern part of the detachment beneath the Gulf of Corinth.

From Corinth gulf extension to Ionian subduction/collision (W. Greece): micro-seismicity survey to constrain local tectonics and regional geodynamics

2020 ◽  
Author(s):  
Valentine Lefils ◽  
Alexis Rigo ◽  
Efthimios Sokos
Keyword(s):  
Seismic Velocity ◽  
Deformation Mode ◽  
Velocity Model ◽  
Fault System ◽  
Normal Faults ◽  
Corinth Gulf ◽  
National Network ◽  
The North ◽  
Gulf Of Corinth ◽  
Seismological Network

<p>The North-Eastern zone of the Gulf of Corinth in Greece is characterized by the rotation of a micro-plate in formation. The Island Akarnanian Block (IAB) have been progressively individualized since the Pleistocene (less than ~ 1.5 My ago). This micro-plate is the result of a larger-scale tectonic context with, on one side the N-S extension of the Gulf of Corinth to the East, and on the other side the Hellenic subduction to the South and the Apulian collision to the West. To the Northeast, the IAB micro-plate is bounded by a large North-South sinistral strike-slip fault system, the Katouna-Stamna Fault (KSF) and by several normal faults. To the North, normal faults reach the limit between Apulian and Eurasian plates and to the East, they form the East-West graben of Trichonis lake.</p><p>Although the structures and dynamics behind the Gulf of Corinth extension are today relatively known, nevertheless, the set of faults linking the Gulf of Corinth to the Western subduction structures remain poorly studied. The seismicity recorded by the Greek national network shows discrepancies regarding to the faults mapped on the surface.</p><p>At the end of 2015, a new micro-seismicity campaign started with the deployment of a temporary seismological network in an area ranging from the Gulf of Patras to the Amvrakikos Gulf toward the North. This network includes 17 seismic stations, recording continuously, added to the permanent stations of the Corinth Rift Laboratory (CRL) and of the Hellenic Unified Seismic Network (HUSN).</p><p>The analysis of the seismological records is still in process for the 2016 and 2017 years. Our study consists first in picking the <em>P</em>- and <em>S</em>- waves, and then to precisely localize the seismic events recorded by our temporary seismological network combined with the permanent ones. We will present here the event location map obtained for the 2016-2017 period, a new seismic velocity model, and focal mechanisms. The seismic activity including thousands of events, is characterized by the presence of numerous clusters of few days to few weeks duration. The clusters are analysed in detail by relative relocations in order to appraise their physical processes and their implications in the fault activity. We will discuss the deformation mode of the region and build a seismotectonic model consistent with the regional geodynamics and observations.</p>

Strain partitioning around an indenter during oroclinal bending: kinematics of the Circum-Moesian fault system of the Carpatho-Balkanides

2021 ◽  
Author(s):  
Nemanja Krstekanic ◽  
Liviu Matenco ◽  
Uros Stojadinovic ◽  
Ernst Willingshofer ◽  
Marinko Toljić ◽  
...  
Keyword(s):  
Large Scale ◽  
Strike Slip ◽  
Fault System ◽  
Normal Faults ◽  
Strain Partitioning ◽  
The South ◽  
The Carpathians ◽  
The North ◽  
Moesian Platform ◽  
Parallel Extension

<p>The Carpatho-Balkanides of south-eastern Europe is a double 180° curved orogenic system. It is comprised of a foreland-convex orocline, situated in the north and east and a backarc-convex orocline situated in the south and west. The southern orocline of the Carpatho-Balkanides orogen formed during the Cretaceous closure of the Alpine Tethys Ocean and collision of the Dacia mega-unit with the Moesian Platform. Following the main orogen-building processes, the Carpathians subduction and Miocene slab retreat in the West and East Carpathians have driven the formation of the backarc-convex oroclinal bending in the south and west. The orocline formed during clockwise rotation of the Dacia mega-unit and coeval docking against the Moesian indenter. This oroclinal bending was associated with a Paleocene-Eocene orogen-parallel extension that exhumed the Danubian nappes of the South Carpathians and with a large late Oligocene – middle Miocene Circum-Moesian fault system that affected the orogenic system surrounding the Moesian Platform along its southern, western and northern margins. This fault system is composed of various segments that have different and contrasting types of kinematics, which often formed coevally, indicating a large degree of strain partitioning during oroclinal bending. It includes the curved Cerna and Timok faults that cumulate up to 100 km of dextral offset, the lower offset Sokobanja-Zvonce and Rtanj-Pirot dextral strike-slip faults, associated with orogen parallel extension that controls numerous intra-montane basins and thrusting of the western Balkans units over the Moesian Platform. We have performed a field structural study in order to understand the mechanisms of deformation transfer and strain partitioning around the Moesian indenter during oroclinal bending by focusing on kinematics and geometry of large-scale faults within the Circum-Moesian fault system.</p><p>Our structural analysis shows that the major strike-slip faults are composed of multi-strand geometries associated with significant strain partitioning within tens to hundreds of metres wide deformation zones. Kinematics of the Circum-Moesian fault system changes from transtensional in the north, where the formation of numerous basins is controlled by the Cerna or Timok faults, to strike-slip and transpression in the south, where transcurrent offsets are gradually transferred to thrusting in the Balkanides. The characteristic feature of the whole system is splaying of major faults to facilitate movements around the Moesian indenter. Splaying towards the east connects the Circum-Moesian fault system with deformation observed in the Getic Depression in front of the South Carpathians, while in the south-west the Sokobanja-Zvonce and Rtanj-Pirot faults splay off the Timok Fault. These two faults are connected by coeval E-W oriented normal faults that control several intra-montane basins and accommodate orogen-parallel extension. We infer that all these deformations are driven by the roll-back of the Carpathians slab that exerts a northward pull on the upper Dacia plate in the Serbian Carpathians. However, the variability in deformation styles is controlled by geometry of the Moesian indenter and the distance to Moesia, as the rotation and northward displacements increase gradually to the north and west.</p>

scholarly journals Recent Activity and Kinematics of the Bounding Faults of the Catanzaro Trough (Central Calabria, Italy): New Morphotectonic, Geodetic and Seismological Data

Geosciences ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 405
Author(s):  
Claudia Pirrotta ◽  
Graziella Barberi ◽  
Giovanni Barreca ◽  
Fabio Brighenti ◽  
Francesco Carnemolla ◽  
...  
Keyword(s):  
Scaling Laws ◽  
Normal Fault ◽  
Historical Earthquakes ◽  
Fault System ◽  
Normal Faults ◽  
The North ◽  
Seismological Data ◽  
Geomorphic Features ◽  
Half Graben ◽  
Fault Scarps

A multidisciplinary work integrating structural, geodetic and seismological data was performed in the Catanzaro Trough (central Calabria, Italy) to define the seismotectonic setting of this area. The Catanzaro Trough is a structural depression transversal to the Calabrian Arc, lying in-between two longitudinal grabens: the Crati Basin to the north and the Mesima Basin to the south. The investigated area experienced some of the strongest historical earthquakes of Italy, whose seismogenic sources are still not well defined. We investigated and mapped the major WSW–ENE to WNW–ESE trending normal-oblique Lamezia-Catanzaro Fault System, bounding to the north the Catanzaro Trough. Morphotectonic data reveal that some fault segments have recently been reactivated since they have displaced upper Pleistocene deposits showing typical geomorphic features associated with active normal fault scarps such as triangular and trapezoidal facets, and displaced alluvial fans. The analysis of instrumental seismicity indicates that some clusters of earthquakes have nucleated on the Lamezia-Catanzaro Fault System. In addition, focal mechanisms indicate the prevalence of left-lateral kinematics on E–W roughly oriented fault plains. GPS data confirm that slow left-lateral motion occurs along this fault system. Minor north-dipping normal faults were also mapped in the southern side of the Catanzaro Trough. They show eroded fault scarps along which weak seismic activity and negligible geodetic motion occur. Our study highlights that the Catanzaro Trough is a poliphased Plio-Quaternary extensional basin developed early as a half-graben in the frame of the tear-faulting occurring at the northern edge of the subducting Ionian slab. In this context, the strike-slip motion contributes to the longitudinal segmentation of the Calabrian Arc. In addition, the high number of seismic events evidenced by the instrumental seismicity, the macroseismic intensity distribution of the historical earthquakes and the scaling laws relating to earthquakes and seismogenic faults support the hypothesis that the Lamezia-Catanzaro Fault System may have been responsible for the historical earthquakes since it is capable of triggering earthquakes with magnitude up to 6.9.

Upper plate deformation during blueschist exhumation, ancestral western California forearc basin, from stratigraphic and structural relationships at Mount Diablo and in the Rio Vista Basin

2021 ◽  
Author(s):  
Jeffrey Unruh
Keyword(s):  
San Francisco ◽  
Late Cretaceous ◽  
Normal Faults ◽  
Coast Range ◽  
Forearc Basin ◽  
Bay Area ◽  
The North ◽  
Early Tertiary ◽  
Local Equivalent ◽  
Structural Relief

ABSTRACT Late Cenozoic growth of the Mount Diablo anticline in the eastern San Francisco Bay area, California, USA, has produced unique 3D exposures of stratigraphic relationships and normal faults that record Late Cretaceous uplift and early Tertiary extension in the ancestral California forearc basin. Several early Tertiary normal faults on the northeast flank of Mount Diablo have been correlated with structures that accommodated Paleogene subsidence of the now-buried Rio Vista basin north of Mount Diablo. Stepwise restoration of deformation at Mount Diablo reveals that the normal faults probably root into the “Mount Diablo fault,” a structure that juxtaposes blueschist-facies rocks of the Franciscan accretionary complex with attenuated remnants of the ophiolitic forearc basement and relatively unmetamorphosed marine forearc sediments. This structure is the local equivalent of the Coast Range fault, which is the regional contact between high-pressure Franciscan rocks and structurally overlying forearc basement in the northern Coast Ranges and Diablo Range, and it is folded about the axis of the Mount Diablo anticline. Apatite fission-track analyses indicate that the Franciscan rocks at Mount Diablo were exhumed and cooled from depths of 20+ km in the subduction zone between ca. 70−50 Ma. Angular unconformities and growth relations in the Cretaceous and Paleogene stratigraphic sections on the northeast side of Mount Diablo, and in the Rio Vista basin to the north, indicate that wholesale uplift, eastward tilting, and extension of the western forearc basin were coeval with blueschist exhumation. Previous workers have interpreted the structural relief associated with this uplift and tilting, as well as the appearance of Franciscan blueschist detritus in Late Cretaceous and early Tertiary forearc strata, as evidence for an “ancestral Mount Diablo high,” an emergent Franciscan highland bordering the forearc basin to the west. This outer-arc high is here interpreted to be the uplifted footwall of Coast Range fault. The stratigraphic and structural relations exposed at Mount Diablo support models for exposure of Franciscan blueschists primarily through syn-subduction extension and attenuation of the overlying forearc crust in the hanging wall of the Coast Range fault, accompanied by (local?) uplift and erosion of the exhumed accretionary prism in the footwall.

Sign in / Sign up

Export Citation Format

Share Document