scholarly journals Whole-lithosphere shear during oblique rifting

Geology ◽  
2021 ◽  
Author(s):  
Brandon M. Lutz ◽  
Gary J. Axen ◽  
Jolante W. van Wijk ◽  
Fred M. Phillips
Keyword(s):  
Shear Zone ◽  
Fault Zone ◽  
Shear Zones ◽  
Death Valley ◽  
Necessary Condition ◽  
Middle Crust ◽  
Metamorphic Core Complexes ◽  
Dextral Shear ◽  
Depth Gradients ◽  
Metamorphic Core

Processes controlling the formation of continental whole-lithosphere shear zones are debated, but their existence requires that the lithosphere is mechanically coupled from base to top. We document the formation of a dextral, whole-lithosphere shear zone in the Death Valley region (DVR), southwest United States. Dextral deflections of depth gradients in the lithosphere-asthenosphere boundary and Moho are stacked vertically, defining a 20–50-km-wide, lower lithospheric shear zone with ~60 km of shear. These deflections underlie an upper-crustal fault zone that accrued ~60 km of dextral slip since ca. 8–7 Ma, when we infer that whole-lithosphere shear began. This dextral offset is less than net dextral offset on the upper-crustal fault zone (~90 km, ca. 13–0 Ma) and total upper-crustal extension (~250 km, ca. 16–0 Ma). We show that, before ca. 8–7 Ma, weak middle crust decoupled upper-crustal deformation from deformation in the lower crust and mantle lithosphere. Between 16 and 7 Ma, detachment slip thinned, uplifted, cooled, and thus strengthened the middle crust, which is exposed in metamorphic core complexes collocated with the whole-lithosphere shear zone. Midcrustal strengthening coupled the layered lithosphere vertically and therefore enabled whole-lithosphere dextral shear. Where thick crust exists (as in pre–16 Ma DVR), midcrustal strengthening is probably a necessary condition for whole-lithosphere shear.

scholarly journals Rheological transitions in the middle crust: insights from Cordilleran metamorphic core complexes

2016 ◽  
Author(s):  
Frances J. Cooper ◽  
John P. Platt ◽  
Whitney M. Behr
Keyword(s):  
High Strain ◽  
Shear Zones ◽  
Ductile Deformation ◽  
Lower Zone ◽  
Middle Crust ◽  
Metamorphic Core Complexes ◽  
Brittle Ductile Transition ◽  
Ductile Shear ◽  
Metamorphic Core ◽  
Whipple Mountains

Abstract. High strain mylonitic rocks in Cordilleran metamorphic core complexes reflect ductile deformation in the middle crust, but in many examples it is unclear how these mylonites relate to the brittle detachments that overlie them. Field observations, microstructural analyses, and thermobarometric data from the footwalls of three metamorphic core complexes in the Basin and Range province, USA (the Whipple Mountains, California; the northern Snake Range, Nevada; and Ruby Mountains–East Humboldt Range, Nevada) suggest the presence of two distinct rheological transitions in the middle crust. (1) The brittle-ductile transition (BDT), which depends on thermal gradient and tectonic regime, and marks the switch from discrete brittle faulting and cataclasis to continuous, but still localized, ductile shear. (2) The localized-distributed transition or LDT, a deeper, dominantly temperature-dependent transition, which marks the switch from localized ductile shear to distributed ductile flow. In this model, brittle normal faults in the upper crust persist as ductile shear zones below the BDT in the middle crust, and sole into the subhorizontal LDT at greater depths. In metamorphic core complexes, the presence of these two distinct rheological transitions results in the development of two zones of ductile deformation: a relatively narrow zone of high-stress mylonite that is spatially and genetically related to the brittle detachment, underlain by a broader zone of high-strain, relatively low-stress rock that formed in the middle crust below the LDT, and in some cases before the detachment was initiated. In some examples (e.g. the Whipple Mountains) the lower zone is spatially distinct from the detachment, although high-strain rocks from the lower zone were subsequently exhumed along the detachment. The two zones show distinct microstructural assemblages, reflecting different conditions of temperature and stress during deformation, and contain superposed sequences of microstructures reflecting progressive exhumation, cooling, and strain localization.

scholarly journals Rheological transitions in the middle crust: insights from Cordilleran metamorphic core complexes

Solid Earth ◽  
2017 ◽  
Vol 8 (1) ◽  
pp. 199-215 ◽  
Author(s):  
Frances J. Cooper ◽  
John P. Platt ◽  
Whitney M. Behr
Keyword(s):  
High Strain ◽  
High Stress ◽  
Shear Zones ◽  
Ductile Deformation ◽  
Middle Crust ◽  
Metamorphic Core Complexes ◽  
Brittle Ductile Transition ◽  
Ductile Shear ◽  
Metamorphic Core ◽  
Whipple Mountains

Abstract. High-strain mylonitic rocks in Cordilleran metamorphic core complexes reflect ductile deformation in the middle crust, but in many examples it is unclear how these mylonites relate to the brittle detachments that overlie them. Field observations, microstructural analyses, and thermobarometric data from the footwalls of three metamorphic core complexes in the Basin and Range Province, USA (the Whipple Mountains, California; the northern Snake Range, Nevada; and Ruby Mountains–East Humboldt Range, Nevada), suggest the presence of two distinct rheological transitions in the middle crust: (1) the brittle–ductile transition (BDT), which depends on thermal gradient and tectonic regime, and marks the switch from discrete brittle faulting and cataclasis to continuous, but still localized, ductile shear, and (2) the localized–distributed transition, or LDT, a deeper, dominantly temperature-dependent transition, which marks the switch from localized ductile shear to distributed ductile flow. In this model, brittle normal faults in the upper crust persist as ductile shear zones below the BDT in the middle crust, and sole into the subhorizontal LDT at greater depths.In metamorphic core complexes, the presence of these two distinct rheological transitions results in the development of two zones of ductile deformation: a relatively narrow zone of high-stress mylonite that is spatially and genetically related to the brittle detachment, underlain by a broader zone of high-strain, relatively low-stress rock that formed in the middle crust below the LDT, and in some cases before the detachment was initiated. The two zones show distinct microstructural assemblages, reflecting different conditions of temperature and stress during deformation, and contain superposed sequences of microstructures reflecting progressive exhumation, cooling, and strain localization. The LDT is not always exhumed, or it may be obscured by later deformation, but in the Whipple Mountains, it can be directly observed where high-strain mylonites captured from the middle crust depart from the brittle detachment along a mylonitic front.

scholarly journals Origin of Meteoric Fluids in Extensional Detachments

Geofluids ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-8
Author(s):  
Paul D. Bons ◽  
Enrique Gomez-Rivas
Keyword(s):  
Fluid Flow ◽  
Isotopic Composition ◽  
Shear Zone ◽  
Hydrogen Isotope ◽  
Meteoric Water ◽  
Pore Space ◽  
Shear Zones ◽  
Metamorphic Core Complexes ◽  
Hydrogen Isotope Ratios ◽  
Metamorphic Core

Minerals in veins and shear zones often show oxygen and hydrogen isotope ratios that are interpreted as recording interaction with meteoric water, at depths up to about 10 km. Downward fluid flow to these depths can only occur in the unlikely case of fluid pressures that are significantly lower than lithostatic overburden pressures. We therefore propose that fluid movement was upward instead of downward. In our model, the pore space within sediments and exhumed rocks below an unconformity is filled with meteoric and possibly seawater fluids. Burial of these rocks traps the fluids that can retain their meteoric isotopic composition as long as temperatures remain below about 300-350°C. Extension or rapid exhumation, such as that experienced by metamorphic core complexes, which results in decompression or fluid heating can release these old “meteoric” fluids, of which we find the isotopic fingerprint in veins and shear zone minerals.

Tectonic significance of synextensional ductile shear zones within the Early Miocene Alaçamdağ granites, northwestern Turkey

2009 ◽  
Vol 147 (4) ◽  
pp. 611-637 ◽  
Author(s):  
FUAT ERKÜL
Keyword(s):  
Hanging Wall ◽  
Shear Zones ◽  
Early Miocene ◽  
Aegean Region ◽  
Menderes Massif ◽  
Metamorphic Core Complexes ◽  
Ductile Shear Zones ◽  
Northwestern Turkey ◽  
Ductile Shear ◽  
Metamorphic Core

AbstractSynextensional granitoids may have significant structural features leading to the understanding of the evolution of extended orogenic belts. One of the highly extended regions, the Aegean region, includes a number of metamorphic core complexes and synextensional granitoids that developed following the Alpine collisional events. The Alaçamdağ area in northwestern Turkey is one of the key areas where Miocene granites crop out along the boundary of various tectonic units. Structural data from the Early Miocene Alaçamdağ granites demonstrated two different deformation patterns that may provide insights into the development of granitic intrusions and metamorphic core complexes. (1) Steeply dipping ductile shear zones caused emplacement of syn-tectonic granite stocks; they include kinematic indicators of a sinistral top-to-the-SW displacement. This zone has also juxtaposed the İzmir–Ankara Zone and the Menderes Massif in the west and east, respectively. (2) Gently dipping ductile shear zones have developed within the granitic stocks that intruded the schists of the Menderes Massif on the structurally lower parts. Kinematic data from the foliated granites indicate a top-to-the-NE displacement, which can be correlated with the direction of the hanging-wall movement documented from the Simav and Kazdağ metamorphic core complexes. The gently dipping shear zones indicate the presence of a detachment fault between the Menderes Massif and the structurally overlying İzmir–Ankara Zone. Mesoscopic- to map-scale folds in the shallow-dipping shear zones of the Alaçamdağ area were interpreted to have been caused by coupling between NE–SW stretching and the accompanying NW–SE shortening of ductilely deformed crust during Early Miocene times. One of the NE-trending shear zones fed by granitic magmas was interpreted to form the northeastern part of a sinistral wrench corridor which caused differential stretching between the Cycladic and the Menderes massifs. This crustal-scale wrench corridor, the İzmir–Balıkesir transfer zone, may have controlled the asymmetrical and symmetrical extensions in the orogenic domains. The combination of the retreat of the Aegean subduction zone and the lateral slab segmentation leading to the sinistral oblique-slip tearing within the Eurasian upper plate appears to be a plausible mechanism for the development of such extensive NE-trending shear zones in the Aegean region.

Kinematic data on major Variscan strike-slip faults and shear zones in the Polish Sudetes, northeast Bohemian Massif

1997 ◽  
Vol 134 (5) ◽  
pp. 727-739 ◽  
Author(s):  
P. ALEKSANDROWSKI ◽  
R. KRYZA ◽  
S. MAZUR ◽  
J. ŻABA
Keyword(s):  
Shear Zone ◽  
Fault Zone ◽  
Bohemian Massif ◽  
Early Carboniferous ◽  
Shear Zones ◽  
Strike Slip ◽  
Late Carboniferous ◽  
Late Devonian ◽  
The West ◽  
West Sudetes

The still highly disputable terrane boundaries in the Sudetic segment of the Variscan belt mostly seem to follow major strike-slip faults and shear zones. Their kinematics, expected to place important constraints on the regional structural models, is discussed in some detail. The most conspicuous is the WNW–ESE Intra-Sudetic Fault Zone, separating several different structural units of the West Sudetes. It showed ductile dextral activity and, probably, displacement magnitude of the order of tens to hundreds kilometres, during late Devonian(?) to early Carboniferous times. In the late Carboniferous (to early Permian?), the sense of motion on the Intra-Sudetic Fault was reversed in a semi-brittle to brittle regime, with the left-lateral offset on the fault amounting to single kilometres. The north–south trending Niemcza and north-east–southwest Skrzynka shear zones are left-lateral, ductile features in the eastern part of the West Sudetes. Similarly oriented (northeast–southwest to NNE–SSW) regional size shear zones of as yet undetermined kinematics were discovered in boreholes under Cenozoic cover in the eastern part of the Sudetic foreland (the Niedźwiedź and Nysa-Brzeg shear zones). One of these is expected to represent the northern continuation of the major Stare Mesto Shear Zone in the Czech Republic, separating the geologically different units of the West and East Sudetes. The Rudawy Janowickie Metamorphic Unit, assumed in some reconstructions to comprise a mostly strike-slip terrane boundary, is characterized by ductile fabric developed in a thrusting regime, modified by a superimposed normal-slip extensional deformation. Thrusting-related deformational fabric was locally reoriented prior to the extensional event and shows present-day strike-slip kinematics in one of the sub-units. The Sudetic Boundary Fault, although prominent in the recent structure and topography of the region, was not active as a Variscan strike-slip fault zone. The reported data emphasize the importance of syn-orogenic strike-slip tectonics in the Sudetes. The recognized shear sense is compatible with a strike-slip model of the northeast margin of the Bohemian Massif, in which the Kaczawa and Góry Sowie Units underwent late Devonian–early Carboniferous southeastward long-distance displacement along the Intra-Sudetic Fault Zone from their hypothetical original position within the Northern Phyllite Zone and the Mid-German Crystalline High of the German Variscides, respectively, and were juxtaposed with units of different provenance southwest of the fault. The Intra-Sudetic Fault Zone, together with the Elbe Fault Zone further south, were subsequently cut in the east and their eastern segments were displaced and removed by the younger, early to late Carboniferous, NNE–SSW trending, transpressional Moldanubian–Stare Mesto Shear Zone.

Crustal melt granites and migmatites along the Himalaya: melt source, segregation, transport and granite emplacement mechanisms

2009 ◽  
Vol 100 (1-2) ◽  
pp. 219-233 ◽  
Author(s):  
M. P. Searle ◽  
J. M. Cottle ◽  
M. J. Streule ◽  
D. J. Waters
Keyword(s):  
Partial Melting ◽  
Shear Zone ◽  
Internal Heat ◽  
Shear Zones ◽  
Source Rocks ◽  
Crustal Thickening ◽  
Main Central Thrust ◽  
Crustal Layer ◽  
Middle Crust ◽  
The Himalaya

ABSTRACTIndia–Asia collision resulted in crustal thickening and shortening, metamorphism and partial melting along the 2200 km-long Himalayan range. In the core of the Greater Himalaya, widespread in situ partial melting in sillimanite+K-feldspar gneisses resulted in formation of migmatites and Ms+Bt+Grt+Tur±Crd±Sil leucogranites, mainly by muscovite dehydration melting. Melting occurred at shallow depths (4–6 kbar; 15–20 km depth) in the middle crust, but not in the lower crust. 87Sr/86Sr ratios of leucogranites are very high (0·74–0·79) and heterogeneous, indicating a 100 crustal protolith. Melts were sourced from fertile muscovite-bearing pelites and quartzo-feldspathic gneisses of the Neo-Proterozoic Haimanta–Cheka Formations. Melting was induced through a combination of thermal relaxation due to crustal thickening and from high internal heat production rates within the Proterozoic source rocks in the middle crust. Himalayan granites have highly radiogenic Pb isotopes and extremely high uranium concentrations. Little or no heat was derived either from the mantle or from shear heating along thrust faults. Mid-crustal melting triggered southward ductile extrusion (channel flow) of a mid-crustal layer bounded by a crustal-scale thrust fault and shear zone (Main Central Thrust; MCT) along the base, and a low-angle ductile shear zone and normal fault (South Tibetan Detachment; STD) along the top. Multi-system thermochronology (U–Pb, Sm–Nd, 40Ar–39Ar and fission track dating) show that partial melting spanned ̃24–15 Ma and triggered mid-crustal flow between the simultaneously active shear zones of the MCT and STD. Granite melting was restricted in both time (Early Miocene) and space (middle crust) along the entire length of the Himalaya. Melts were channelled up via hydraulic fracturing into sheeted sill complexes from the underthrust Indian plate source beneath southern Tibet, and intruded for up to 100 km parallel to the foliation in the host sillimanite gneisses. Crystallisation of the leucogranites was immediately followed by rapid exhumation, cooling and enhanced erosion during the Early–Middle Miocene.

Sign in / Sign up

Export Citation Format

Share Document