Low-temperature X-ray studies of crystal-lattice parameters and thermal expansion of KTiOPO4 crystals

2000 ◽  
Vol 45 (2) ◽  
pp. 215-218 ◽  
Author(s):  
A. U. Sheleg ◽  
E. M. Zub ◽  
L. A. Stremoukhova ◽  
S. A. Guretskii
2014 ◽  
Vol 70 (a1) ◽  
pp. C1560-C1560
Author(s):  
Fumiko Kimura ◽  
Wataru Oshima ◽  
Hiroko Matsumoto ◽  
Hidehiro Uekusa ◽  
Kazuaki Aburaya ◽  
...  

In pharmaceutical sciences, the crystal structure is of primary importance because it influences drug efficacy. Due to difficulties of growing a large single crystal suitable for the single crystal X-ray diffraction analysis, powder diffraction method is widely used. In powder method, two-dimensional diffraction information is projected onto one dimension, which impairs the accuracy of the resulting crystal structure. To overcome this problem, we recently proposed a novel method of fabricating a magnetically oriented microcrystal array (MOMA), a composite in which microcrystals are aligned three-dimensionally in a polymer matrix. The X-ray diffraction of the MOMA is equivalent to that of the corresponding large single crystal, enabling the determination of the crystal lattice parameters and crystal structure of the embedded microcrytals.[1-3] Because we make use of the diamagnetic anisotropy of crystal, those crystals that exhibit small magnetic anisotropy do not take sufficient three-dimensional alignment. However, even for these crystals that only align uniaxially, the determination of the crystal lattice parameters can be easily made compared with the determination by powder diffraction pattern. Once these parameters are determined, crystal structure can be determined by X-ray powder diffraction method. In this paper, we demonstrate possibility of the MOMA method to assist the structure analysis through X-ray powder and single crystal diffraction methods. We applied the MOMA method to various microcrystalline powders including L-alanine, 1,3,5-triphenyl benzene, and cellobiose. The obtained MOMAs exhibited well-resolved diffraction spots, and we succeeded in determination of the crystal lattice parameters and crystal structure analysis.


1954 ◽  
Vol 32 (11) ◽  
pp. 708-713 ◽  
Author(s):  
W. B. Pearson

Measurements of the lattice parameters of lithium at temperatures below 300° K. have been made and the results are compared with previous work and considered in terms of the Grüneisen relationship. Methods of low temperature X-ray photography are also discussed.


2007 ◽  
Vol 33 (1) ◽  
pp. 86-88 ◽  
Author(s):  
N. Z. Gasanov ◽  
E. M. Kerimova ◽  
A. I. Gasanov ◽  
Yu. G. Asadov

1959 ◽  
Vol 3 ◽  
pp. 41-47
Author(s):  
A. Taylor

AbstractThe camera was constructed to fill the need for a low-temperature instrument capable of yielding high spectral resolution and accurate lattice parameters. Specimen temperatures in the range -190 to 300°C are attainable.A special feature of the camera is the film holder which is split along the beam axis into two symmetrical halves and which can easily be removed from the base without disturbing the cooling system or the specimen. The specimenholderis mounted on a cross-slide to enable specimens of large radius to be rotated off-center with the beam at glancing incidence to their surface. Finally, diffraction patterns from large metallurgical samples may be obtained by removing one of the film holders and employing the apparatus as a “half camera.”Some applications of the camera to the thermal expansion of SiC and MnSe are described.


Sign in / Sign up

Export Citation Format

Share Document